Cut Sheet

3
May 2018
Wireless Area Controller
www.eaton.com/lightingsystems
Physical Specifications
Weights: 115g (4.06 oz) wireless manager
40g (1.41 oz) ceiling mounting kit
Color: Gray
Dimensions: 4.75" W x 4.75" H x 1" D (120.65mm W x 120.65mm H x 25.4mm D)
Mounting
Ceiling, wall or din rail mount options
Security
AES 128-bit encryption for wireless communication
Regulatory
cULus Listed - Energy Management Equipment (UL 916)
UL Certified - Cybersecurity for Network-Connectable Products (UL 2900)
Complies with the following electromagnetic requirements: – EN 61000-4-2– EN 61000-4-4– EN 61000-4-5
FCC Part 15/ICES-003
Wireless
Radio: 2.4GHz
Standard: 802.15.4
Transmitter Power: + 7dBm
Range: 150ft (50m) LOS
# of Walls: 3 interior walls standard construction
Max # of Devices: 200 per Wireless Area Controller (best practice 100 devices)
PAIR button functionality
Using the PAIR button on the Wireless Area Controller allows the addition or removal of wireless devices to the WaveLinx system,
reset building network login information and restore factory defaults.
PAIR button press Device outcome WAC LED feedback
Enter Construction Group
1 press 1 press Dim to 10% 802.15.4 LED blinks
Leave Construction Group
1 press (after enter Construction group) Raise to 75% 802.15.4 LED ON
Remove Devices Default Area
Press and hold for 4 seconds Devices in Default Area leave WaveLinx
network
Reset administrator and Wi-Fi UN/PW
Press and Hold for 20 seconds Wi-Fi LED blinks SoS pattern
Factory Defaults
Power cycle WAC
Press and hold for 30 seconds
All devices and programming cleared
from WAC
All LEDs blink SoS pattern for 1 minute