Cut Sheet

ManualsBrandsCooper Lighting Solutions ManualsDual Technology Occupancy SensorsDual Tech Wall/Corner Sensor, 120

Technical Data

Effective November 5, 2014

OAWC-DT – Dual Technology

Wall/Corner Sensor

Overview

The Dual Technology sensor’s combination of Ultrasonic and Passive

Infrared technologies offers the most complete sensing equipment

available today. Self-adjusting Dual Technology sensors drastically

simplify and reduce a contractor’s installation and adjustment time

period.

Features

MicroSet self-adjusting time delay and sensitivity

Optional built-in light level sensor

Optional BAS/HVAC isolated relay

NEMA WD7 Guide robotic method utilized to verify coverage

patterns

Manual On feature for use with 1 or 2 momentary switches

controlling 1 or more Switchpacks

Selectable Walk-Through Mode

Catalog# Prepared by

Project Date

Comments Type

Technical Data

PIR

Activated

Self-Adjusting

Ultraasonic

Activated

Summary of content (4 pages)

PAGE 1
Technical Data Effective November 5, 2014 OAWC-DT – Dual Technology Wall/Corner Sensor Catalog# Prepared by Project Date Comments Type Overview The Dual Technology sensor’s combination of Ultrasonic and Passive Infrared technologies offers the most complete sensing equipment available today. Self-adjusting Dual Technology sensors drastically simplify and reduce a contractor’s installation and adjustment time period.
PAGE 2
Technical Data November 2014 Specifications Technology Power Requirements Time Delays Light Level Sensing (-R Models) Operating Environment Housing Size Mounting Passive Infrared (PIR) and Ultrasonic (US) Input 0-30 VDC from Greengate Switchpack or Greengate System Maximum current needed is 25 mA per sensor Output Open collector output to switch up to ten Greengate Switchpacks Isolated Form C Relay in (-R models) Isolated Form C Relay Ratings: 1A 30 VDC/VAC Self-Adjusting, 15 seconds/test, 5, 10, 15, 30
PAGE 3
Technical Data OAWC-DT – Dual Technology Wall/Corner Sensor November 2014 Wiring Diagrams OAWC-DT-120W-R Model HOT LINE RED (15 VDC) BLUE (CONTROL) BLUE **HOT SWITCHPACK WHITE NEUTRAL **USE BLACK LEAD FOR 120 VAC. USE ORANGE LEAD FOR 277 VAC. CAP UNUSED LEAD. LOAD "A" BLUE BLACK (COMMON) HOT LINE NEUTRAL BLACK (COMMON) 2. LOADS TURN OFF WHEN SENSOR TIMES OUT OR WITH SWITCHES. YELLOW (CONTROL-OCC/DAY) AUTOMATIC MODE OPERATION: **USE BLACK LEAD FOR 120 VAC.
PAGE 4
Technical Data OAWC-DT – Dual Technology Wall/Corner Sensor Controls DIP Switch Legend Time Delay DIP Switch Activation Activation PIR Sensitivity Walk-Through Mode LEDs Override Lighting Sweep Daylighting Mode Power Pack One Power Pack Two (-R model only) (-R model only) *Self-Adjusts to 10 min. user mode Activation 3 4 1 PIR 5 Default = 1 2 3 4 5 6 7 8 9 10 9715-000004-00 Ordering Catalog # Coverage Field of View Features OAWC -DT-120W-R OAWC-DT-120W 1,200 sq. ft.