User Manual




REVB10/18/12,ECN8972

7
Run VibraScout™ (All Programs‐> Dytran‐> VibraScout™).Afterdetecting the 7543A, the
software will perform a self‐test to verify that the device is functioning properly and then
displaytheVibraScout™application.
8 GUIlayout&DescriptionofSoftwareFeatures
1. ConfigurationScreen


Figure8:ConfigurationWindow
2. FileMenu
AllGUIfields(bandwidthselection,FFTplotselections,etc)arestoredinaconfigurationfile.
Fields are read from the default fileVibraScoutConfig.xml when VibraScout™ is launched.
The file is updated by selecting SaveGUI Settings from the File menu.Fields may also be
saved to other filenames using Save GUI
 Settings As and then read back using Load GUI
Settings.Thisfeatureisusefulforsaving/loadinglocation‐specificparameters.Thenameof
thecurrentfileisdisplayedbelowthemenubar.


