User Manual




REVB10/18/12,ECN8972

10

Figure9:AcquisitionWindow

8. TriggerModes
Acquisition is started by enabling one of the two trigger modes. Auto  Trigger mode is
amplitude independent so that triggering begins immediately and runs continuously when
enabled.i.e.similartoanoscilloscopeautotriggeredscrollmode.
SmartTriggermodestartsdataacquisitionwhenthefirstchangein
valueonanyofthethree
acceleration axes exceeds the specified threshold  in Units of Gpk‐pk. Acquisition  is to be
stopped by user. Data are monitored continuously and the maximum change in value
(maximumofthethreeaxes)isdisplayedintheCurValuefield.

9. Inclination[deg]Display
Static
inclinationvaluesinbothXandYaxis,areupdatedcontinuouslywhentheAutoor
SmartTriggerisenabled.Thesefieldsareonlyvalidinstaticanglemeasurementmode.

10. TemperatureDisplay
ThetemperatureismeasuredandupdatedcontinuouslywhentheAutoorSmartTriggeris
enabled.