User guide

TSFM 500 DC 6 32-1101 REV 2 710
5.1 Speed
Independent speeds can be set for both directions of movement. The parameters are labeled as follows:
Default speed settings and available speeds are as follows:
5.2 Auto Return (AUTO RETURN)
With this feature, the test stand moves to a limit switch, load set point, or travel limit (TSTM / TSTMH only), whichever
occurs first, and stops. Then, the test stand returns to the other limit and stops. The test speed is dictated by the
independent speed settings. The return speed is always maximum speed.
Default setting: off
Available settings: off, on