Manual

resolution; 0.1% accuracy; 6 msec step response.
RELAY OUTPUT, OPTIONAL: Form -C, SPDT Relays
POWER RATING FOR
RESISTIVE LOADS:
Two relays at P6 and P7
30Vdc or 250 Vac @ 5 Amp
Two relays at P18A and P18B
30 Vdc or 250 Vac @ 3 Amp
(see Figure 5-9)
TURNDOWN RATIO
(MAX OFFSET-MIN SPAN): 1000 with 0.1% or 100 with 0.01% resolution
NETWORK AND COMMUNICATIONS,OPTIONAL:
ETHERNET: Standards Compliance IEEE 802.3 10Base-T
SUPPORTED PROTOCOLS: TCP/IP, ARP, HTTPGET, TELNET
RS-232 / RS-422 / RS-485 /
MODBUS:
Selectable from menu; both ASCII and modbus protocol
selectable from menu. Programmable 300 to 19.2 K baud;
complete programmable setup capability; program to transmit
current display, alarm status, min/max, actual measure input
value and status.
RS-485
(HALF AND FULL DUPLEX): Addressable from 0 to 199
ISOLATION
See CE Approvals Section
POWER
LINE VOLTAGE/POWER
VOLTAGES: 90-240 Vac, +/-10%
FREQUENCY: 50/60 Hz
POWER: 8.5 watts, max
EXTERNAL FUSE
PROTECTION REQUIRED: IEC127-2/III, 250 mA (Time-Lag) or UL Slow-Blow
LOW VOLTAGE/POWER OPTION
VOLTAGES: 10-32 Vdc
POWER: 8 watts, max
External power source must meet Safety Agency Approvals.
ENVIRONMENTAL
OPERATING TEMP RANGE: 0 to 50 ºC (32 to 140°F)
STORAGE TEMP RANGE: -40 to 85 ºC (-40 to 202°F)
HUMIDITY: up to 95% non-condensing at 40°C (104°F)
FRONT PANEL: NEMA-4 rated
MECHANICAL
DIMENSIONS (H x W x D): 1.89 x 3.78 x 5.86in. (48 x 96 x 145mm)
PANEL CUTOUT (H x W): 1/8 DIN 1.772 X 3.622in. (45 x 92mm)
WEIGHT: 1.2 pounds (448 g)
MATERIAL: 94V-0 UL-rated Polycarbonate
APPROVALS
See CE Approvals Section.
CF 156 76 M2544/N/0505