Manual

Figure 7-6. Potentiometer Connections with Internal Power
Supply and Ratio Measurement.
Figure 7-7. Potentiometer Connections with External Power
Supply and Ratio Measurement (Remove Jumper S2-G)
7.3 Signal Input Connections - Temperature
The following Figures (7-8 through 7-11) show the connections for Thermocouple and RTD Inputs.
Figure 7-8. Directly-Connected Thermocouple
Figure 7-9. RTD Connections with 2-wire RTD
CF 156 21 M2544/N/0505