Quick Start Guide

Function buttons
8
9
-
+
10
SILENCE/FP Button
1
2
4
5
3
9
10
8
6
7
11
12
13
14
15
TURBO
SELF
CLEAN
SLEEP
SILENCE
FP
TIMER
ON
TIMER
OFF
LOCK
RESET
LED
FOLLOW
ME
FAN
SPEED
SWING
MODE
TEMP
ON/OF F
SWING
7
When you press the recessed RESET button,
all current settings are cancelled and the
control will return to the initial settings.
RESET Button:
Active/Disable SILENCE function.
When the Silence function is activated, the
compressor will operate at low frequency and
the indoor unit will bring faint breeze, which will
reduce the noise to the lowest level and create
a quiet and comfortable room for you. Due to
low frequency operation of compressor, it may
result in insufficient cooling and heating capacity.
During the heating operation(only when the
setting mode is HEAT),If pushing this button
more than 2 seconds, the FP function is
activated. The unit will operate at high fan
speed with the temperature automatically set to
O O
8 C(46 F).The display window of indoor unit
will display FP . For the unit without display
area, the Defrost indicator light will be
keeping on for 2 seconds, and then be off for
2 seconds by turns. Press ON/OFF,SLEEP,
FP,MODE, FAN SPEED,UP, DOWN button
while operating will cancel the FP function.
,
,
,
,
,
,
,
,
UP Button( )
Push this button to decrease the indoor
o o
temperature setting in 1 F increments to 86 F.
DOWN Button( )
Push this button to increase the indoor
o o
temperature setting in 1 F increments to 62 F.
NOTE: Press and hold UP and DOWN buttons
together for 3 seconds will alternate the temper-
O O
ature display between the C & F scale.