Brochure

Technical Data 10289

Effective December 2015

Class H(K), J and R ferrule fuse blocks

Eaton.com/bussmannseries

The only controlled copy of this data sheet is the electronic read-only version located on the Eaton network drive. All other copies of this

document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical

information that will help the end user with design applications. Eaton reserves the right, without notice, to change design or construction

of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice,

any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible

applications.

Installing/removing covers

Closing cover: P

osition cover

over block and push straight

down until it snaps/clicks

into plac

Opening cover: Using both outside

handles, pull straight up.

Installing blocks on DIN-Rail

Place one edge of DIN-Rail in fuse block base, then rotate block down until it clicks into place.

Eato, Bussmann, Fusetron, Limitron and

Low-Peak are valuable trademarks of Eaton

in the US and other countries. You are not

permitted to use the Eaton trademarks

without prior written consent of Eaton.

CSA is a registered trademark of the

Canadian Standards Group.

UL is a registered trademark of

Underwriters Laboratories, Inc.

Eaton

1000 Eaton Boulevard

Cleveland, OH 44122

United States

Eaton.com

Bussmann Division

114 Old State Road

Ellisville, MO 63021

United States

Eaton.com/bussmannseries

Printed in USA

Publication No. 10289 - BU-SB14607

December 2015

For Eaton’s Bussmann series

product information,

call 1-855-287-7626 or visit:

Eaton.com/bussmannseries