User's Guide

4 496679
Figure 1. 9930 LCD Remote Keypad.
On the 9930 keypad the display shows the state of detector zones, the anti-
tamper wiring, and other information as necessary.
f Glows steadily if the connected telephone line is not working correctly.
s Glows steadily if the system needs attention from an Engineer or
Installer.
a Glows steadily when mains power is present. Flashes if the system is
working off its stand-by battery.
The keys allow you to enter your access code to set and unset the system. In
addition, individual keys let you start or stop various functions. These are:
Key Used to:
A Set the system to Level A (Full Set).
B Set the system to Level B.
C Part set the system to Level C.
D Part set the system to Level D.
4 Change the user access codes.
5 Display the last 250 log events.
6 Set the internal clock/calendar, which provides a time stamp on log
entries.
7 Enable or disable the Chime facility.
8 Start a test of the sounders and strobe.
9 Start a test of the detectors. (See "4. Special Functions".)
1. Introduction
16 digit Liquid
Crystal Display
(LCD)
Optional
programmable
panic alarm
keys. Press keys
1 and 3 together
Omit and Enter
keys
Level
setting keys
Power
Fire alarm keys.
Press keys 7
and 9 together
Medical
assistance keys.
Press keys 4
and 6 together