User manual

8 www.cooperbussmann.com/wirelessresources
Cooper Bussmann 615M-1 Cellular Data Modem and IP Router Series Manual
Rev Version 1.0
Specifications
Power Supply
Nominal Supply
9 to 28 Vdc; Under/Over Voltage Protection and Reverse Polarity
Molex 43025-0400 4-pin locking connector
Average Current Draw 130 mA @ 13.8 Vdc (Idle)
Transmit Current Draw 350 mA @ 13.8 Vdc
NOTE Specifications subject to change.
1
UMTS
2
HSPA
3
EDGE
4
GPRS
5
EVDO Rev A (IS-856-A)
6
1xEVDO Rev 0 (IS-856)
7
1xRTT (IS-2000)
8
Access via SNMP only
1.4 Mechanical Specifications
This section describes the exterior dimensions of the 615M-1 modem. A DIN rail mounting plate (not shown) is
provided with the modem, and needs to be fitted to the modem using the screws and toothed washers provided,
as described in the installation instructions. The mounting plate can be used to secure the modem to any surface
that can be drilled for such purpose.
The following drawings may be used as layout reference before proceeding with the mounting process.
1.68
2.55
4.28 4.53
4.05
4.50
4.05
1.90 2.18
6.00
Bottom View Product View
1.68
2.55 4.28 4.53
4.05
4.50
4.05
1.90
2.18
6.00
Front View Side View
Figure 2 615M-1 Mechanical Drawings