User manual

64 www.cooperbussmann.com/wirelessresources
Cooper Bussmann 615M-1 Cellular Data Modem and IP Router Series Manual
Rev Version 1.0
615M-1–VPN Pass-Through Configuration
Using this scenario, the 615M-1 is acting a pass-through to the VPN connection. Apply these parameters changes
into the 615M-1.
1. From the main navigation pane, click LAN.
2. On the LAN page, click the LAN Settings tab.
3. Disable the “LAN Masquerade” option and click Save.
Figure 40 LAN Settings
4. From the main navigation pane, click Router.
5. On the Router page, click the Port Forwarding tab.
6. Enable the “DMZ” option.
7. Enter the following for Friendly IP Address and Destination IP address:
Friendly IP Address = 0.0.0.0
Destination IP Address = Cisco Router (VPN server) LAN1 IP Address
8. Click Save.
NOTE You can use port forwarding instead of DMZ to configure the VPN Pass-through.
Figure 41 Port Forwarding