User manual

www.cooperbussmann.com/wirelessresources
Cooper Bussmann 615M-1 Cellular Data Modem and IP Router Series Manual
39Rev Version 1.0
Metric Sets the route priority (1 to 20). The lower the metric value the higher the route
priority.
Add Click Add to add the configured route to the (Static) Routing Table.
3.6 Security
Click Security on the main navigation pane to access the PPTP, IPsec, and GRE pages.
Status
Click the Status tab on the Security page to see the status of the PPTP client and server and IPsec tunnels.
Figure 25 Security–Status
PPTP Client
PPTP Client Status Indicates the status of the PPTP Client interface, typically UP when connected
properly. PPTP is the Point-to-Point Tunneling Protocol used to implement a Virtual
Private Network (VPN).
PPTP IP Address The current IP address assigned to the modem by the VPN server.
PPTP Subnet Mask ndicates the status of the PPTP Client interface, usually UP when connected
properly. PPTP is the Point-to-Point Tunneling Protocol used to implement a VPN.
PPTP P-t-P This is the LAN address of your VPN server.
PPTP Server
Status The PPTP Server is either ENABLED or DISABLED, depending on the setting
selected on the Security–PPTP page.
Connected Users Number of users currently connected to the PPTP Server.
IPsec Tunnels
Status The number of established IPsec tunnels based on the number of tunnels Enabled on
the Security–IPsec page.