Manualshelf

User manual

ManualsBrandsCooper Bussmann ManualsComputer equipment615M-1
31323334353637383940
32 www.cooperbussmann.com/wirelessresources
Cooper Bussmann 615M-1 Cellular Data Modem and IP Router Series Manual
Rev Version 1.0
Friendly IP Address Specifies the IP address from which remote administration is permitted. Entering
0.0.0.0 will allow any IP address. Leave the fifth box blank (after the /) if specifying
a specific IP, or 0.0.0.0. A subnet mask may be entered in the fifth box. The mask
indicates how many bits of the IP address to match. The mask can be a value from 1
to 32.
Apply Friendly IP
Address
Selecting the checkbox for a service allows remote access to the service only from
the friendly IP address. Clearing the checkbox for a service allows any IP address
access to the service.
SSH, Telnet, and
SNMP Ports
Enter the port number that will be used for remote access to the service. Entering
zero for the port number will block remote access to the service. Once a service is
blocked (0 entered) or moved to another port, the default port number (such as 23
for Telnet) can be used in a Port Forwarding rule to provide access to a user device
located behind the modem. Port Forwarding has precedence. Therefore, if the SSH,
Telnet or SNMP port also appears as an Incoming Port in an entry in Router | Port
Forwarding | IP Mapping Table, that service will be unavailable.
RADIUS Settings
RADIUS
Authentication
Enables or disables RADIUS authentication for web page access.
Server IP Address The IP address of the RADIUS server.
Server Port The port of the server.
Server Secret Sets the secret to use with the server.
Confirm Secret Re-enter the Server Secret to confirm the correct spelling.
Timeout Specifies how many seconds to wait before a retry.
Retries Specifies how many times to retry authenticating with the server before giving up.
Save and Cancel After modifying settings, either click Save to keep the currently displayed value for
each parameter or click Cancel to discard the changes and return to the last saved
parameters. Once Save is clicked, Cancel cannot be used to return to previous
settings.