User manual

www.cooperbussmann.com/wirelessresources
Cooper Bussmann 615M-1 Cellular Data Modem and IP Router Series Manual
25Rev Version 1.0
Figure 17 Cell Connection–CDMA Provisioning
Band Selection
Band A list of frequency bands appropriate for the Active Carrier. Select a specific band
or (recommended) select All Bands.
Current Status
MEID The Mobile Equipment Identifier is used by the cellular carrier as the means to
identify the cellular module. This is the identifier used to set up the user account with
the cellular provider.
MDN/MTN The actual phone number of the device as supplied by the carrier. When the unit is
successfully provisioned, the phone number for the user account is displayed.
MIN/IMSI This number is used by the Mobile Telephone Network, and will be different if ported
from another carrier (not used by end user of device).
PRL The Preferred Roaming List is only applicable to the CDMA product line and is carrier
specific (AllTel, Verizon, Sprint, and so on).
SID System ID (Identity), provided by the carrier.
NID Network Identifier, this is supplied automatically by the network.
Channel Cell Site channel number to which the modem is connected. This number may be
useful to the cellular provider for troubleshooting purposes.
Frequency Cellular frequency band the modem is using. The 800 MHz and 1900 MHz bands
are mainly in the US and outlying areas. In some cases, 900 and 1800 is seen for
European or foreign carriers.