User manual

www.cooperbussmann.com/wirelessresources
Cooper Bussmann 615M-1 Cellular Data Modem and IP Router Series Manual
23Rev Version 1.0
Password Sets the password required by the cellular provider. Leave blank if not required.
Authentication
Protocols
Selects the authentication protocol used. If Auto is selected, the 615M-1 will
negotiate a protocol with the cell tower. If Use Only is chosen, then the 615M-1 will
only accept requests for the specified protocols.
GSM Settings
Click the GSM Settings tab on the Cell Connection page to change GSM settings. The fields are only enabled if the
Active Carrier supports GSM. You can choose a specific Band of operation and change various Subscriber Identity
Module (SIM) settings.
The SIM, a detachable smart card containing a user’s subscription information, is one of the key features of GSM.
This card allows a user to retain his or her information after switching handsets. The SIM has a security feature
which, when enabled, requires a user to enter a valid PIN before the modem will connect to the cellular network.
Figure 16 Cell Connection–GSM Settings
Band Selection
Band A list of frequency bands appropriate for the Active Carrier. Select a specific band or
(recommended) select All Bands.
Current Status
SIM STATUS “SIM ACCEPTED” is displayed if a valid SIM card is inserted properly into the
modem. “NO SIM, Insert Valid SIM and Press Reset” is displayed if the SIM card is
invalid or missing.
PIN STATUS “PIN DISABLED” is displayed when the PIN security is not enabled.
Change PIN Status – Disable PIN
Action “PIN disabled. To change it, it must be enabled first” is displayed when PIN security
is not enabled.