User manual

22 www.cooperbussmann.com/wirelessresources
Cooper Bussmann 615M-1 Cellular Data Modem and IP Router Series Manual
Rev Version 1.0
3.3 Cell Connection – 615M-1
Click Cell Connection on the main navigation pane to access the Carrier, UMTS, CDMA, System Monitor and
Dynamic DNS settings pages.
Carrier
Click the Carrier tab on the Cell Connection page to change carrier settings.
Figure 15 Cell Connection–Carrier
Carrier
Active Carrier Selects the carrier and credentials to use for data calls. The Secondary Carrier
cannot be selected if it is None. Changing carriers takes time, and the page may take
up to one minute to refresh after Save is clicked.
Primary Carrier A list of carriers and their cellular protocols (UMTS/CDMA) and regions (Global,
North America, Europe). Select the appropriate carrier (it cannot be the same as the
Secondary Carrier). UMTS carriers require that a proper SIM be installed.
Secondary Carrier A list of carriers and their cellular protocols (UMTS/CDMA) and regions (Global, North
America, Europe) or None. Select the appropriate carrier. It cannot be the same as
the Primary Carrier. UMTS carriers require that a proper SIM be installed.
Auto Connect When set to Enable, it allows the modem to automatically dial the connection when
the modem is powered. When set to Disable, the modem does not automatically
dial the connection to the cellular provider and does not attempt to automatically
re-connect when the connection has dropped.
Primary/Secondary Carrier
Carrier APN This field is visible only when the corresponding carrier supports UMTS. Enter the
APN provided by the carrier.
User Sets the user name required by the cellular provider. Leave blank if not required.
Warning: If used in combination with this modem’s VPN Server, this user
name and password will also be valid on this modem’s VPN Server.