User manual
www.cooperbussmann.com/wirelessresources
Cooper Bussmann 245U-E Wireless Ethernet Modem & Device Server User Manual
87Rev Version 2.19
Figure 91 Statistics
Wireless Statistics
On the Statistics webpage, Wireless Statistics is the main area for additional diagnostics statistics. The list of
statistics produced is dynamic and may vary depending on the model and configuration (2.4 GHz, 5 GHz or
900MHz, and client or access point).
Access Point
Beacon Miss Count Number of beacons unable to be sent (100-msec intervals) due to interference or
CCA.
Beacon Missed
Reset Count
After 15 consecutive beacon misses (1.5 seconds), this count will increment by1.
This will indicate high interference because the AP is holding off sending beacons,
and utilization will increase.
TX Queue stopped
because full
Message buffer (Ethernet frames) in radio queue. If the radio cannot transmit due
to high noise, this queue increments. When the buffer is full, all new messages are
dropped. Buffer size is 150 messages.