User manual

www.cooperbussmann.com/wirelessresources
Cooper Bussmann 245U-E Wireless Ethernet Modem & Device Server User Manual
71Rev Version 2.19
Figure 72 Example 2 Configuration
The other VLAN groups each have an Ethernet and a wireless interface configured. All Ethernet interfaces are
tagged because they are all connected to a VLAN network. Each wireless interface is configured as untagged to
allow connection from untagged devices. VLAN Group 2 is using the standard wireless interface which is configured
from the main Network page, while the other two are each using one of the WDS Repeater virtual interfaces.
VLAN Group 2 is bridging the default wireless interface with the VLAN ID 10 virtual Ethernet interface. Configuration
of the wireless bridge (operating mode, SSID and radio encryption methods/keys) is performed from the main
Network page, as shown in Figure 73.