User manual

www.cooperbussmann.com/wirelessresources
Cooper Bussmann 2080E-T Managed Ethernet Switch User Manual
85Rev Version 1.0
CLI Commands Level Description Example
sntp daylight-offset
[Minute]
G Set offset of daylight saving time.
If SNTP function is inactive, this
command cannot be applied.
switch>enable
switch#configure
switch(config)#sntp daylight-offset 60
show sntp P Show SNTP information. switch>enable
switch#show sntp
show sntp timezone P Show index number of time zone list. switch>enable
switch#show sntp timezone
no sntp G Disable SNTP function. switch>enable
switch#configure
switch(config)#no sntp
no sntp daylight G Disable daylight saving time. switch>enable
switch#configure
switch(config)#no sntp daylight
Switch Setting Commands
CLI Commands Level Description Example
show terminal P Show console information. switch>enable
switch#show terminal
system name
[System Name]
G Configure system name. switch>enable
switch#configure
switch(config)#system name xxx
system location
[System Location]
G Set switch system location string. switch>enable
switch#configure
switch(config)#system location xxx
system description
[System Description]
G Set switch system description string. switch>enable
switch#configure
switch(config)#system description xxx
system contact
[System Contact]
G Set switch system contact window
string.
switch>enable
switch#configure
switch(config)#system contact xxx
show system-info E Show system information. switch>show system-info
System Event Log Command
CLI Commands Level Description Example
show syslog P Show SYSLOG configuration and log
table.
switch>enable
switch#show syslog
System Reboot Command
CLI Commands Level Description Example
reload G Reboot switch. switch>enable
switch#configure
switch(config)#reload