User manual

www.cooperbussmann.com/wirelessresources
Cooper Bussmann 2080E-T Managed Ethernet Switch User Manual
81Rev Version 1.0
CLI Commands Level Description Example
no accounting I Clear interface accounting
information.
switch>enable
switch#configure
switch(config)#interface fastEthernet 2
switch(config-if)#no accounting
Port Status Command
CLI Commands Level Description Example
show interface status I Show interface actual status. switch>enable
switch#configure
switch(config)#interface fastEthernet 2
switch switch (config-if)#show
interface status
Pro-Ring2se Commands
CLI Commands Level Description Example
pro-ring2se enable G Enable Pro-Ring2se. switch>enable
switch#configure
switch(config)# pro-ring2se enable
pro-ring2se mode
[master|transit]
G Configure mode. switch>enable
switch#configure
switch(config)# pro-ring2se mode
master
pro-ring2se primary-port
[Port number]
G Configure primary port. switch>enable
switch#configure
switch(config)# pro-ring2se primary-
port 7
pro-ring2se secondary-
port
[Port number]
G Configure secondary port. switch>enable
switch#configure
switch(config)# pro-ring2se
secondary-port 8
pro-ring2se control-vlan
[Vlan ID]
G Configure control VLAN. switch>enable
switch#configure
switch(config)# pro-ring2se control-
vlan 100
pro-ring2se protect-vlan
[Vlan list]
G Configure protect VLAN. switch>enable
switch#configure
switch(config)# pro-ring2se protect-
vlan 200
show pro-ring2se P Show Pro-Ring2se configuration. switch>enable
switch# show pro-ring2se
no pro-ring2se G DisablePro-Ring2se. switch>enable
switch#configure
switch(config)# no pro-ring2se