User manual

76 www.cooperbussmann.com/wirelessresources
Cooper Bussmann 2080E-T Managed Ethernet Switch User Manual
Rev Version 1.0
IP Security Commands
CLI Commands Level Description Example
security enable G Enable IP security function. switch>enable
switch#configure
switch(config)#security enable
security http G Enable IP security of HTTP server. switch>enable
switch#configure
switch(config)#security http
security telnet G Enable IP security of telnet server. switch>enable
switch#configure
switch(config)#security telnet
security snmp G Enable IP security of SNMP server. switch>enable
switch#configure
switch(config)#security snmp
security ip
[Index(1..10)]
[IP Address]
G Set the IP security list. switch>enable
switch#configure
switch(config)#security ip 1
192.168.1.55
show security P Show the information of IP security. switch>enable
switch#show security
no security G Disable IP security function. switch>enable
switch#configure
switch(config)#no security
no security http G Disable IP security of HTTP server. switch>enable
switch#configure
switch(config)#no security http
no security telnet G Disable IP security of Telnet server. switch>enable
switch#configure
switch(config)#no security telnet
no security snmp G Disable IP security of SNMP server. switch>enable
switch#configure
switch(config)#no security snmp
IP Setting Commands
CLI Commands Level Description Example
ip address
[Ip-address]
[Subnet-mask]
[Gateway]
G Configure the IP address of switch. switch>enable
switch#configure
switch(config)#ip address 192.168.1.1
255.255.255.0 192.168.1.254
ip dhcp G Enable DHCP client function of
switch.
switch>enable
switch#configure
switch(config)#ip dhcp
show ip P Show IP information of switch. switch>enable
switch#show ip