User manual

58 www.cooperbussmann.com/wirelessresources
Cooper Bussmann 2080E-T Managed Ethernet Switch User Manual
Rev Version 1.0
Figure 60 COS Mapping to Queue
COS Priority Each COS has four priority levels to choose from: High, Middle, Low, Lowest.
COS Port Default Assign a default priority value to each port. A default priority is considered and
determined by the ingress port when an ingress packet has no VLAN tag.
Apply Click to apply the setting.
DSCP Mapping to Queue
This page allows you to set the default priority for incoming packets that do not have a priority assigned to them.
To configure DSCP mapping to queue, choose Configure-->QoS-->DSCP Mapping to Queue.
Figure 61 DSCP Mapping to Queue