User manual

50 www.cooperbussmann.com/wirelessresources
Cooper Bussmann 2080E-T Managed Ethernet Switch User Manual
Rev Version 1.0
Figure 49 Static Filtering
IP Address Assign a multicast group IP address in the range 224.0.0.0 to 239.255.255.255.
Member Ports Select the port checkbox to include the port as a member in the specified multicast
group IP address.
Add Click to add the address to the multicast filtering list.
Delete Click to remove a selected filter.
6.5.7 LLDP
Link Layer Discovery Protocol (LLDP) is defined in the IEEE802.1AB, and is an emerging standard that provides a
solution for the configuration issues caused by expanding LANs. LLDP specifically defines a standard method for
Ethernet network devices, such as switches, routers and wireless LAN access points, to advertise information about
themselves to other nodes on the network and store the information they discover. LLDP runs on all 802 media. The
protocol runs over the data-link layer only, allowing two systems running different network layer protocols to learn
about each other.
LLDP Configuration
To configure LLDP, choose Configure-->LLDP-->LLDP Configuration.
Figure 50 LLDP Configuration
LLDP Protocol Enable or disable the LLDP function.