User manual

www.cooperbussmann.com/wirelessresources
Cooper Bussmann 2080E-T Managed Ethernet Switch User Manual
41Rev Version 1.0
To display this page, choose Configure-->Port-->Port Alert.
Figure 40 Port Alert
Port Event For the Port Event menus to become available, the “Client Only” option in Syslog
Configuration must be enabled (see “6.4.5 Syslog”).
There are four port event options:
• Link Up—The system will only issue a log message when the link-up event
occurs for the port.
• Link Down—The system will only issue a log message when the link-down
event occurs for the port.
• Link Up & Link Down—The system will issue a log message at the time when
the port connection is link-up or link-down.
• Disable—No event will be sent to the system log.
Apply Click to apply the setting.
6.5.2 Rate Control
Rate Limit
You can set the bandwidth rate and frame limitation type for each port. To display this page, choose
Configure-->Rate Control-->Rate Limit.