User manual

40 www.cooperbussmann.com/wirelessresources
Cooper Bussmann 2080E-T Managed Ethernet Switch User Manual
Rev Version 1.0
Figure 39 Port Statistics
Port Port number.
Type Displays the current speed of connection to the port.
Link Current link status:
• Up—Link is operational.
• Down—Link is not operational.
State State set on the Port Configuration page (see “6.5.1 Port”). When the state is
disabled, the port will not transmit or receive packets.
TX Good Packet Number of good packets transmitted via this port.
TX Bad Packet Number of bad packets transmitted via this port. Bad packets include undersized
packets (less than 64 octets), oversized packets, CRC errors, fragments, and jabber
packets.
RX Good Packet Number of good packets received via this port.
RX Bad Packet Number of bad packets received by this port. Bad packets include undersized
packets (less than 64 octets), oversized packets, CRC errors, fragments, and jabber
packets.
TX Abort Packet Number of packets aborted during transmission.
Packet Collision Number of packet collisions.
Drop Packet Number of dropped packets.
RX Bcast Packet Number of broadcast packets received.
RX Mcast Packet Number of multicast packet received.
TX Mcast Packet Number of multicast packet transmitted.
Clear Click to clear all counts.
Port Alert
If the Syslog Mode is enabled on the Syslog Configuration page (see “6.4.5 Syslog”) the event log will be sent to
the system log server. If you also want the port event log to be sent to the system log server, you need to set the
triggers (link up, link down, and both) in the Port Alert page.