User manual

38 www.cooperbussmann.com/wirelessresources
Cooper Bussmann 2080E-T Managed Ethernet Switch User Manual
Rev Version 1.0
Figure 36 IP Binding
Apply Click to apply the setting.
6.5 Configure Menu
6.5.1 Port
Port Configuration
To configure the settings of each port to control the connection parameters, choose
Configure-->Port-->Configuration. The status of each port is listed at the bottom of the page.
Figure 37 Port Configuration
State Allows you to enable or disable the port. When the port is disabled, it will not receive
or transmit packets.
Speed/Duplex You can choose a port speed setting, or choose Auto Negotiation for the port to
negotiate the speed. The port speed options are 100 FULL, 100 HALF, 10 FULL and
10 HALF.