User manual

34 www.cooperbussmann.com/wirelessresources
Cooper Bussmann 2080E-T Managed Ethernet Switch User Manual
Rev Version 1.0
Current Access
Tables
Lists the existing access table profiles.
Context Prefix Enter the context prefix to be used to identify the context name.
Group Name Enter the group name associated with this access profile.
Security Level Select a security level for users of the access profile:
• NoAuthNoPriv—User is not authenticated. Packets are not encrypted.
• AuthNoPriv—User is authenticated. Packets are not encrypted.
• AuthPriv—User is authenticated. Packets are encrypted.
Context Match Rule Select the rule that will apply to a context match:
• Exact—Context name of a request must match the context prefix to access MIB
views defined in this access profile.
• Prefix—Initial substring of the context name of a request must match the context
prefix value to access MIB views defined in this access profile.
Read View Name Enter the name of the MIB view defining the MIB objects for which read access is
requested. If here is no Read View Name, read access is not granted. MIB views are
defined in the MIB View tab.
Write View Name Enter the name of MIB view defining the MIB objects for which write access is
requested. If there is no Write View Name, write access is not granted. MIB views are
defined in the MIB View tab.
Notify View Name Enter the name of the MIB view defining the MIB objects which may be included in a
notification request. MIB views are defined in the MIB View tab.
Add Adds the new access profile.
Remove Removes the access profile selected in the Current Access Tables list.
Use the MIB View tab to configure the management information base (MIB) table.
Figure 31 SNMPv3 MIB View Tab