User manual

www.cooperbussmann.com/wirelessresources
Cooper Bussmann 2080E-T Managed Ethernet Switch User Manual
33Rev Version 1.0
Use the Group tab to configure the SNMPv3 group table The group name created in this tab is associated with
the user ID. Both the group name and the user ID are used as parameters to create entries in the access table that
appears in the Access tab.
Figure 29 SNMPv3 Group Tab
Current Group
Content
List of existing groups (and their associated user IDs). To remove a group, select the
group and click Remove.
Security Name
(User ID)
User name of the user to be added to the group or removed from the group. This
must be a user name that you have set up in the User tab.
Group Name Name of the group to which the user is to be added.
Add Adds the user to the group.
Remove Removes the group name (associated with a user) currently selected in the Current
Group Content field.
Use the Access tab to configure the SNMPv3 access table. The entries in this table define different access profiles.
Each access profile can be identified by its context prefix and group name. An access profile is associated with a
security level, context matching rule, and names of read, write, and modify MIB views. An MIB view can be created
in the MIB View tab.
Figure 30 SNMPv3 Access Tab