User manual

www.cooperbussmann.com/wirelessresources
Cooper Bussmann 2080E-T Managed Ethernet Switch User Manual
27Rev Version 1.0
6.4.3 Account - Admin
Use the Admin page to change the login username and password for the Web-based Management utility to ensure
access security. Choose System-->Account-->Admin to display this page.
Figure 21 Admin Page
User Name Type the new user name (the default is “admin”).
New Password Type the new password.
Confirm Password Re-type the new password.
Apply Click to apply the settings.
6.4.4 IP Addressing – IPV4
The 2080E-T Switch needs to be assigned an IP address that identifies it on the network. You can select a method
of assigning IP address to the switch by choosing System-->IP Addressing-->IPV4.
Figure 22 IPV4 Page
DHCP Client Enable or disable the DHCP client function. When the DHCP client function is
enabled, the switch will automatically obtain an IP address from the network DHCP
server. The default IP address will be replaced by the assigned IP address from the
DHCP server. After you click Apply, a message informs you that when the DHCP
client is enabled the current IP address will be lost and you will need to find the new
IP obtained from the DHCP server.