User manual

24 www.cooperbussmann.com/wirelessresources
Cooper Bussmann 2080E-T Managed Ethernet Switch User Manual
Rev Version 1.0
System Name Assign the system name of the switch (the maximum length is 64 bytes).
System Description Switch description.
System Location Physical location of the switch (the maximum length is 64 bytes).
System Contact Name of contact person or organization.
System OID: SNMP OID of switch.
Firmware Version Displays the switch’s firmware version.
Kernel Version Displays the kernel software version.
Device MAC Displays the unique hardware address assigned by manufacturer.
Apply Click to apply the settings.
CPU Load Average
To display the CPU load average for the switch, choose System-->General-->CPU Load Average. The load
is averaged over the previous 1-minute, 5-minute, and 15-minute intervals, as shown in Figure 19. The X-axis
indicates the minute intervals, and the Y-axis indicates the average CPU load. When the average CPU load reaches
90% the system logs an event alarm to the Syslog if the Syslog checkbox is selected under Event Alarm Setting at
the bottom of the page. To enable the Syslog, see “6.4.5 Syslog.”
Figure 19 CPU Load Average Page
Loading Average Displays the CPU load statistics.
Event Alarm Setting Select the Syslog checkbox if you want an alarm to be logged to the Syslog when
the CPU load exceeds 90% utilization.
Apply Click to apply the Event Alarm Setting.
Refresh Click to reload the graph and table.