User manual

www.cooperbussmann.com/wirelessresources
Cooper Bussmann 2080E-T Managed Ethernet Switch User Manual
15Rev Version 1.0
3.4 Wiring the Power Inputs
Use the following steps below to insert the power wire.
1. Insert the DC power wires into the contacts for power 1 and power 2, as shown below.
Power 2Power 1
2. Tighten the wire-clamp screws to prevent the wires from coming loose.
Power 2Power 1
NOTE The wire gauge for the terminal block should be within the range 12–24 AWG.