Product Overview

Channel Nuts & Hardware
KwikWire™ Hardware
59
(1)
Wire Rope Construction Type 7 x 7
(2)
Wire Rope Construction Type 7 x 19
Clamps
Wire Rope
(Uncoated Galvanized Wire)
7 x 7
7 x 19
See table below for KwikWire™
Clamp Working Loads
KwikWire™ Clamp
W
orking Loads*
Clamp
Wire Lbs.
Part No.
Rope Safety
Dia. Factor 5
BKC100
1
/16” 0-75
BKC100
3
/32”
25-150
BKC200
1
/8” 25-250
BKC200
3
/16” 50-640
*Working loads shown
are for hanging
vertically.
For suspending at
15°, 30°, 45° or 60°
angles from vertical, use
the following percentage
of the working loads from
the chart:
15° = 96%
30° = 86%
45° = 70%
60° = 50%
Instr
uctions for installing the wir
e r
ope in the clamp -
No tools ar
e r
equir
ed.
T
o adjust, remove tension
and pull wire rope slightly
to disengage teeth, slide
adjustment pin in
direction shown by arrow
to release wire rope.
Loop wire rope
through/around
support
Pass wire rope back
through KwikWire™
Clamp
Push wire rope through
clamp leaving 2” to 3”
tail, then apply tension
on wire rope
Pass the wire rope
through the KwikWire
™
Clamp
123
4
5
For Use With Wire Box
Part No. Rope Diameters Qty.
BKC100
1
/16” &
3
/32” 100
BKC200
1
/8” &
3
/16”50
Part No. Rope Dia. Working Load Spool
in. mm Lbs. kg
BKW063
(1)
1
/16” (1.6) 96 (43.5) 500 ft.
BKW094
(1)
3
/32” (2.3) 184 (83.4) 500 ft.
BKW125
(1)
1
/8” (3.2) 340 (154.2) 500 ft.
BKW188
(2)
3
/16” (4.8) 840 (381.0) 250 ft.