Product Overview
Par
t Number
W
ith
W
ithout
Thr
ead Wt./C
Spring
Spring
Size Thickness
Lbs.
kg
N224SS6
N224WOSS6
1
/4”-20
1
/4” (6.3) 6.6 (3.0)
N228SS6
N228WOSS6
3
/8”-16
3
/8” (9.5) 10.6 (4.8)
N225SS6 N225WOSS6
1
/2”-13
3
/8” (9.5) 9.7 (4.4)
Part Number
With Without Thread Wt./C
Spring Spring Size Thickness
Lbs. kg
N524SS6 N224WOSS6
1
/4”-20
1
/4” (6.3) 6.6 (3.0)
N528SS6 N228WOSS6
3
/8”-16
3
/8” (9.5) 10.6 (4.8)
N525SS6
N225WOSS6
1
/2”-13
3
/8” (9.5) 9.7 (4.4)
NUTS FOR B22, B24, B32 CHANNELS
CHANNEL NUTS
• For Channel Nuts pull-out strength and slip resistance, use the data
shown in “Channel Nuts & Hardware” section of this catalog.
Note: Reduce slip load by 50% due to hardness of material.
NUTS FOR B42, B52, B54 CHANNELS
Conduit Material Design Load Wt./C
Part No. Pipe Size Thickness
Lbs. kN Lbs. kg
B2001 SS4
3
/8” (10) 16 Ga. (1.5) 400 (1.78) 10 (4.5)
B2008 SS4
1
/2” (15) 16 Ga. (1.5) 400 (1.78) 11 (5.0)
B2009 SS4
3
/4” (20) 14 Ga. (1.9) 600 (2.67) 15 (6.8)
B2010 SS4 1” (25) 14 Ga. (1.9) 600 (2.67) 16 (7.2)
B2011 SS4 1
1
/4” (32) 14 Ga. (1.9) 600 (2.67) 20 (9.1)
B2012 SS4 1
1
/2” (40) 12 Ga. (2.6) 800 (3.56) 30 (13.6)
B2013 SS4 2” (50) 12 Ga. (2.6) 800 (3.56) 34 (15.4)
B2014 SS4 2
1
/2” (65) 12 Ga. (2.6) 800 (3.56) 38 (17.2)
B2015 SS4 3” (80) 12 Ga. (2.6) 800 (3.56) 44 (19.9)
B2016 SS4 3
1
/2” (90) 12 Ga. (2.6) 1000 (4.45) 51 (23.1)
B2017 SS4 4” (100) 12 Ga. (2.6) 1000 (4.45) 55 (24.9)
B2018 SS4 4
1
/2” (115) 12 Ga. (2.6) 1000 (4.45) 59 (26.7)
B2019 SS4 5” (125) 12 Ga. (2.6) 1000 (4.45) 64 (29.0)
B2020 SS4 6” (150) 12 Ga. (2.6) 1000 (4.45) 80 (36.3)
STAINLESS STEEL FITTINGS
Most fittings, as shown in this catalog, can be supplied in Type 304 or Type 316 stainless steel. See “Fittings”
section (page 72) of this catalog.
Consult factory for possible minimum production quantities and set-up charges.
B2000 SERIES
PIPE AND TUBING CLAMPS
• Safety Factor of 5
• Combination Recess Hex Head Machine Screw and Square Nut included
• Material: Stainless Steel Type 304 & 316
SPRING NUT
NUT WITHOUT SPRING
Design Load
Alum. & Stainless Steel Materials
Reference page 176 for general fitting specifications. Other channel combinations available-see steel section for styles.
Stainless Steel
181