Product Overview
Concrete Inserts
Reference page 212 for general fitting and standard finish specifications.
Anchors
220
PLASTIC SCREW ANCHORS
• Kits contain 100 anchors, 100 screws, and 1 concrete drill bit
Catalog Screw Load Cap. Load Cap.
Number Size
T
ension* Shear*
Lbs. kN Lbs. kN
APC-8K #8 x 1” 110 (0.49) 70 (0.31)
APC-10K #10 x 1” 140 (0.62) 90 (0.40)
APC-12K #12 x 1” 140 (0.62) 90 (0.40)
Note: Based on concrete compression strength of 4,000 psi using
applied safety factor of 4.
Catalog Rod Insert Thread Overall Load Cap. Load Cap.
Number Size Color Length Length Tension* Shear*
in. mm in. mm lbs. kN lbs. kN
ACPW-25
1
/4”-20 Brown
3
/8” (9) 1
7
/8” (47) 930 (4.13) 370 (1.64)
ACPW-37
3
/8”-16 Green
5
/8” (16) 1
7
/8” (47) 1200 (5.33) 1330 (5.91)
ACPW-50
1
/2”-13 Yellow
11
/16” (17) 1
7
/8” (47) 1200 (5.33) 1840 (8.18)
ACPW-62
5
/8”-11 Red
15
/16” (24) 1
7
/8” (47) 1160 (5.16) 2800 (12.45)
ACPW-75
3
/4”-10 Purple 1
1
/8” (28) 1
7
/8” (47) 1160 (5.16) 2800 (12.45)
WOOD-KNOCKER™ ANCHORS
Notes: Based on normal weight concrete with minimum compression strength of 3,000 psi.
Allowable load capacities are calculated using applied safety factor of 4.
Minimum embedment is 2”
(51mm).
Wood-Knocker™ is a trademark of Powers
®
Fasteners
Catalog Rod Insert Thread Upper Deck Lower Deck Upper Deck Lower Deck
Number Size Color Length Tension Load* Tension Load* Shear Load* Shear Load*
in. mm lbs. kN lbs. kN lbs. kN lbs. kN
ACPD-25
1
/4”-20 Brown
3
/8” (9) 1112 (4.94) 830 (3.69) 625 (2.78) 625 (2.78)
ACPD-37
3
/8”-16
Green
5
/8” (16) 1435 (6.38) 830 (3.69) 837 (3.72) 837 (3.72)
ACPD-50
1
/2”-13 Yellow
1
1
/16” (17) 1775 (7.89) 830 (3.69) 837 (3.72) 837 (3.72)
ACPD-62
5
/8”-1
1 Red
15
/16” (24) 2200 (9.78) 990 (4.40) 837 (3.72) 837 (3.72)
ACPD-75
3
/4”-10 Purple 1
1
/8” (28) 2200 (9.78) 990 (4.40) 837 (3.72) 837 (3.72)
ACPD-87
7
/8”-9
Black
1
5
/16” (33) 2200 (9.78) 990 (4.40) 837 (3.72) 837 (3.72)
BANG-IT™ ANCHORS
Notes: Based on normal weight concrete with minimum compression strength of 3,000 psi.
Allowable load capacities are calculated using applied safety factor of 4.
Minimum insert spacing of 12”
(305mm), minimun end spacing of 12” (305mm).
Minimum embedment is 2”
(51mm).
Length of sleeve is 3
3
/8” (86mm.
Bang-It
™ is a trademark of Powers
®
Fasteners