Product Overview

Continuous slot Concrete Inserts are designed to
provide a pre-set support system cast in concrete
ceilings, walls, and floors to allow flexibility of
attachment at any point along the channel. This
provides an excellent support system for pipe,
conduit, and cable trays.
Continuous Concrete Inserts, manufactured from
Cooper B-Line’s standard channels, have formed
anchors spaced on 4 inch
(101.6 mm) centers.
3
/16”
(4.8 mm) nail-holes are provided for securing the
inserts to the forms.
Available in lengths from 3 inches (7.62 cm) to 240
inches (609.6 cm), Concrete Inserts are shipped
complete with end caps and styrofoam filler strips
which prevent seepage of concrete into the insert.
Styrofoam is easily removed by pulling the
convenient pull-tab.
Materials & Finishes*
*Unless otherwise noted.
Spot Inserts
Cooper B-Line’s Spot Inserts provide for economical single attachment points with full flexibility of
fastener sizing, but with limited adjustment. These products are made from steel strips in accordance
with ASTM A1011, 33,000 PSI min. yield. Standard finish is electro-plated zinc (ASTM B633).
Special Concrete Inserts
Pre-stressed inserts, inserts with studs welded to the back of the channel, and other types of special
inserts are available from Cooper B-Line.
Test Data
Independent
T
esting Laboratory test data available upon request.
Metric
Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.
Concrete Inserts
Continuous Concrete Inserts
212
Finish
Code Finish Specification
PLN Plain ASTM A1011
33,000 PSI min. yield
GRN Dura-Green
ZN Electro-Plated Zinc ASTM B633 SC1 Type III
GALV Pre-Galvanized ASTM A653
33,000 PSI min. yield
HDG Hot-Dipped Galvanized ASTM A123
SS4 Stainless Steel Type 304 ASTM A240
SS6 Stainless Steel Type 316 ASTM A240