Product Overview

B2601 THRU B2610
TWIST EAR
®
PIPE CLAMP
• One piece break apart, screw retainer
, thread impressions
• Tighter alignment, no need to leave additional space between
clamps in order to access nut and bolt
• Easier access bolt can be tightened directly from front
• Available in
1
/2”,
3
/4”, 1” rigid and EMT Conduit
• Recommended Torque 30 in. - lbs.
• Safety Factor of 3
• Standard finish: ZN
No loose pieces. One piece
break apart with screw
retainer and thread impressions.
Break-apart - break in the
middle, bolt the ends together.
Allows for multiple clamps to be used in succession,
with easier access than other pipe clamps.
B-Line
B2609-3/4
3/4" STD
B-Line
B2609-3/4
3/4" STD
B-Line
B2609-3/4
3/4" STD
B-Line
B2609-3/4
3/4" STD
Use With Design Load Wt./C
Part No. EMT Rigid Conduit Thickness
Lbs. kN Lbs. kg
B2601
1
/2” (17.9) – – 16 Ga. 300 (1.34) 8.2 (3.7)
B2602
3
/4” (23.4) – – 14 Ga. 500 (2.24) 13.5 (6.1)
B2603 1” (29.5) – – 14 Ga. 500 (2.24) 15.6 (7.1)
B2608 ––
1
/2” (21.3) 16 Ga. 300 (1.34) 8.2 (3.7)
B2609 ––
3
/4” (26.7) 14 Ga. 500 (2.24) 13.5 (6.1)
B2610 ––1”(33.4) 14 Ga. 500 (2.24) 15.6 (7.1)
O.D. Size
Height H Width W Design Load Wt/C.
Part No.
In. mm In. mm In. mm Lbs. kN Lbs. kg
BP081SS .250-.840
(6.4-21.3)
1.86
(47.2)
0.87
(22.1)
300
(1.33)
9.0
(4.1)
BP110SS .810-1.100 (20.6-28.0) 2.18 (55.4) 1.19 (30.2) 300 (1.33) 12.0 (5.4)
BP135SS .850-1.350 (21.6-34.8) 2.25 (57.2) 1.38 (35.1) 300 (1.33) 14.0 (6.3)
BP175SS 1.250-1.750
(31.8-44.4)
2.78
(70.6)
1.78 (45.2) 300 (1.33) 21.0 (9.5)
BP205SS 1.550-2.050 (39.4-52.1) 3.00 (76.2) 2.28 (57.9) 300 (1.33) 30.0 (13.6)
BP250SS 2.00-2.50 (50.8-63.5) 3.43 (87.1) 2.83 (71.9) 300 (1.33) 35.0 (15.9)
BP300SS 2.55-3.00 (64.7-76.2) 3.87 (97.8) 3.15 (80.0) 300 (1.33) 39.0 (17.7)
BP325SS 2.75-3.25 (69.9-82.8) 4.06 (103.1) 3.28 (83.3) 300 (1.33) 41.0 (18.6)
BP375SS 3.25-3.75
(82.6-95.3) 4.60 (116.8) 3.83 (97.3) 300 (1.33) 47.0 (21.3)
BP425SS 3.75-4.25
(95.3-108.0)
5.13
(130.3)
4.50
(1
14.3)
300
(1.33) 54.0 (24.4)
BP475SS 4.25-4.75 (108.0-120.7) 5.70 (5.70) 4.85 (123.2) 300 (1.33) 58.0 (26.3)
BP081SS THRU BP475SS
P CLAMPS
• Minimizes induction heating
• Material: Stainless Steel Type 304
Setscrew
O.D. Size
H
W
Design Load
Design Load
14 Gauge
Pipe/Conduit Clamps &
Hangers
Reference page 126 for general fitting and standard finish specifications.
Pipe Clamps
133