Product Overview

ManualsBrandsCooper B-Line ManualsChannel Nuts & Hardware3/20" Zinc Mini Channel Nut w/o Spring (#8-32 Thread)

Strut Systems

Channels, Hardware, Fittings, Mechanical & Electrical Accessories,

Special Materials (Aluminum, Stainless Steel, Fiberglass),

Mini Channel, Concrete Inserts, Slotted Angle, Kwik-Wire™,

Dura-Blok™ Supports

SS-12

Summary of content (252 pages)

PAGE 1
Strut Systems SS-12 Channels, Hardware, Fittings, Mechanical & Electrical Accessories, Special Materials (Aluminum, Stainless Steel, Fiberglass), Mini Channel, Concrete Inserts, Slotted Angle, Kwik-Wire™, Dura-Blok™ Supports
PAGE 2
INTRODUCTION Cooper B-Line, Inc. is a leading manufacturer and fabricator of steel and aluminum products which are used in support of equipment for industrial, commercial, utility, and OEM installations. Cooper B-Line is proud of the exacting standards of research, design, engineering, and manufacturing that go into each and every product that comprise our metal framing product line.
PAGE 3
Table of Contents Introduction ........................... 2-3 Dura-Blok™ Rooftop Supports Info. & Specifications . . . . . . . . . . . . . . . 152 Base Support . . . . . . . . . . . . . . . . . . . . . . . 153 Base Support - Channel . . . . . . . . 153-154 Base Support - Pipe/Tubing Riser . . . 154 Base Support Riser - Channel . . . . . . 155 Base Support Riser - Pipe Roller . . . 155 Base Support - ‘H’ Stand . . . . . . . 156-157 Base Support - Pipe Roller . . . . . . . . . 158 Application Photos . . .
PAGE 4
Introduction Introduction Cooper B-Line’s metal framing support system is designed with many time-saving features. They are fully adjustable and reusable, with a complete line of channels, fittings and accessories for multipurpose applications. • No Welding • No Drilling • Use Your Imagination Cooper B-Line’s metal framing installs quickly. There is no need for special tools. All you need is a wrench and hacksaw.
PAGE 5
Introduction Introduction Cooper B-Line’s Metal Framing system provides an economical solution for electrical, mechanical and industrial supports with an unlimited variety of applications in the construction industry.
PAGE 6
Technical Data Technical Data MATERIALS Carbon Steel Aluminum Channels made from high-quality carbon steel are continuously roll formed to precise dimensions. By cold working the steel mechanical properties are increased, allowing lightweight structures to carry the required load. Corrosion resistance of carbon steel varies widely with coating and alloy. See “Finishes” for more detailed information. Cooper B-Line’s standard aluminum channel is extruded from aluminum alloy 6063-T6.
PAGE 7
Technical Data FINISHES Chromium/ Zinc Zinc Coatings Zinc protects steel in two ways. First it protects the steel as a coating and second as a sacrificial anode to repair bare areas such as cut edges, scratches, and gouges. The corrosion protection of zinc is directly related to its thickness and the environment. This means a .2 mil coating will last twice as long as a .1 mil coating in the same environment. Galvanizing also protects cut and drilled edges.
PAGE 8
Technical Data Technical Data Dura-Green™ and Dura-Copper™ Epoxy Coatings Hanger Equipment for Fire Protection Service, UL203”. Dura-Green and Dura-Copper epoxy coatings are water borne epoxy coatings applied to Cooper B-Line products by a precisely controlled cathodic electrodeposition process. This process is accomplished using a conveyor to transport channel and fittings through several cleaning, phosphatizing and application stages prior to being baked (See diagram below).
PAGE 9
Technical Data WELDING sequence, speed and duration are carefully controlled and monitored by a sophisticated electronic control system. A statistical quality control program, combining destructive and non-destructive testing, is used by Cooper B-Line to ensure high quality welds. Spot Welding MIG Welding Spot welded back-to-back channel is manufactured using a modern DC powered resistance welder controlled by a microprocessor. This produces a series of spot welds with speed and consistency.
PAGE 10
Technical Data CORROSION GALVANIC SERIES IN SEA WATER All metal surfaces are affected by corrosion. Depending on the physical properties of the metal and the environment to which it is exposed, chemical or electromechanical corrosion may occur. Anodic End Atmospheric corrosion occurs when metal is exposed to airborne liquids, solids or gases. Some sources of atmospheric corrosion are moisture, salt, dirt and sulphuric acid.
PAGE 11
Technical Data Aluminum R R R R F R R NR R R F R – R R R F R R R F NR NR NR R R R R F R R R R R R R R F R – R F NR NR NR F NR NR NR F F F R F R F R R Dura-Green NR F R R R R R R R R R R R R R R R R R R R NR F F NR R R R R R F R R R R R R NR R R R NR R R R R R R R R R NR R R R F R R PVC R R NR R R R NR R R NR F R – NR R NR NR R R R R R – – R – R R R – R R NR NR – R R R – – NR R R R R R R R R R R R R R R R R NR Type 304 Stainless R R R R R R R NR R R R NR – – R – – R R R R NR NR NR R R F R NR R R R – – – R
PAGE 12
Technical Data DESIGN OF STRUT SYSTEMS Beams Beams are usually defined as horizontal members which are subjected to vertical loads such as shelves, platforms or supports for pipes, conduits or cable trays. The following is a brief overview of common beam configurations: Cantilever Beam Deflection Cantilever beams are often viewed as variations of a fixed beam, but they have special characteristics of their own.
PAGE 13
Technical Data Safety Factor The design loads given for strut beam loads are based on a simple beam condition using allowable stress of 25,000 psi. This allowable stress results in a safety factor of 1.68. This is based upon a virgin steel minimum yield strength of 33,000 psi cold worked during rolling to an average yield stress of 42,000 psi. support and bracing inherently. Piping, tubing, cable trays, or conduits mounted to the strut with straps and clamps prevent twisting or lateral movement.
PAGE 14
Technical Data The data shown in the beam load charts for appropriate channels on page(s) 16 thru 37 is for simply supported, single span beams with a uniformly distributed load. For other loading and/or support conditions, use the appropriate factor from the chart below. Load Factor LOAD AND SUPPORT CONDITION Simple Beam - Uniform Load Deflection Factor 1.00 1.00 .50 .80 Simple Beam - Two Equal Concentrated Loads at 1/4 Points 1.00 1.10 Beam Fixed at Both Ends - Uniform Load 1.50 .
PAGE 15
Technical Data RECOMMENDED BOLTED METAL FRAMING SPECIFICATION Brackets [ ] indicate alternative specifications which may be substituted by the project engineer. PART 1 - GENERAL 1.01 WORK INCLUDED A. Continuous slot, bolted framing channels and all associated fittings and hardware. B. Trapeze type supports for cable tray, conduit, pipe and other similar systems. C. Use of bolted metal framing as a surface metal raceway. B.
PAGE 16
Metal Framing Channels Channel Cooper B-Line’s metal framing channel is cold formed on our modern rolling mills from 12 Ga. (2.6mm), 14 Ga. (1.9mm), and 16 Ga. (1.5mm) low carbon steel strips. A continuous slot with inturned lips provides the ability to make attachments at any point. Lengths & Tolerances All channels excluding ‘SH’ style ± 1/8” (3.2mm) on 10’ (3.05m) and ± 3/16” (4.76mm) on 20’ (6.09m) All ‘SH’ channels only ± 1/4” (6.35mm) on 10’ (3.05m) and ± 1/2” (12.70mm) on 20’ (6.
PAGE 17
Channel SELECTION CHART for Channels, Materials and Hole Patterns Channel Hole Pattern ** Material & Thickness * Channel Dimensions Channel Type Height Stainless Steel Width Steel Alum. 1 31/4” 27/16” 15/8” 15/8” 15/8” 13/8” 1” 13/16” 13/16” 13/16” 13/16” 13/32” (82.5) (61.9) (41.3) (41.3) (41.3) (34.9) (25.4) (20.6) (20.6) (20.6) (20.6) (10.3) 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 15/8” 13/16” 13/16” (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (41.3) (20.6) (20.
PAGE 18
B11 Channel, Combinations & Load Data B11 • Thickness: 12 Gauge (2.6 mm) • Standard lengths: 10’ (3.05 m) & 20’ (6.09 m) • Standard finishes: Plain, Dura-Green, Pre-Galvanized, Hot-Dipped Galvanized, Aluminum • Weight: 3.05 Lbs./Ft. (4.54 kg/m) 15/8” (41.3) 3/8” (9.5) 3/8” (9.5) 7/8” (22.2) 9/32” (7.1) Y 31/4” (82.5) X X 1.5190 (38.6) 13/16” Y (20.6) X - X Axis SECTION PROPERTIES Channel & Combinations Channel B11 B11A Weight lbs./ft. kg/m 3.059 6.119 (4.55) Areas of Section sq. in.
PAGE 19
B11 Beam & Column Loading Data Y 31/4” (82.5) 61/2” (165.1) Y X X X 15/8” (41.3) X Y Y 13/16” (20.6) 31/4” (82.5) 1.5190 (38.6) B11B Wt. 6.10 Lbs./Ft. (9.08 kg/m) Wt. 6.10 Lbs./Ft. (9.08 kg/m) COLUMN LOADING Unbraced Height In.
PAGE 20
B12 Channel & Combinations B12 • Thickness: 12 Gauge (2.6 mm) • Standard lengths: 10’ (3.05 m) & 20’ (6.09 m) • Standard finishes: Plain, Dura-Green, Pre-Galvanized, Hot-Dipped Galvanized, Aluminum • Weight: 2.47 Lbs./Ft. (3.67 kg/m) 15/8” (41.3) 3/8” (9.5) 3/8” (9.5) 9/32” 7/8” (22.2) (7.1) Y 27/16” (61.9) X X 1.1197 (28.4) Y Channel & Combinations 13/16” (20.6) X - X Axis SECTION PROPERTIES Channel B12 B12A Areas of Section Weight lbs./ft. kg/m 2.484 4.969 (3.
PAGE 21
B12 Beam & Column Loading Data BEAM LOADING Beam Span mm 12 (305) 24 (609) 36 (914) 48 (1219) 60 (1524) 72 (1829) 84 (2133) 96 (2438) 108 (2743) 120 (3048) Uniform Load @ Deflection = 1/240 Span 1/360 Span Uniform Load and Deflection Style Lbs. N In. mm Lbs. N Lbs. N B12 B12A B12 B12A B12 B12A B12 B12A B12 B12A B12 B12A B12 B12A B12 B12A B12 B12A B12 B12A 3880 3880* 3273 3880* 2182 3880* 1636 3880* 1309 3847* 1091 3206 935 2748 818 2404 727 2137 655 1924 (17259) (17259) .
PAGE 22
B22 Channel B22 • Thickness: 12 Gauge (2.6 mm) • Standard lengths: 10’ (3.05 m) & 20’ (6.09 m) • Standard finishes: Plain, Dura-Green, Pre-Galvanized, Hot-Dipped Galvanized, Stainless Steel Type 304 or 316, Aluminum • Weight: 1.90 Lbs./Ft. (2.83 kg/m) 15/8” (41.3) 3/8” (9.5) 15/8” 3/8” (9.5) 7/8” (22.2) Y X 9/32” (7.1) X (41.3) .7252 (18.4) Y Channel & Combinations 13/16” (20.6) X - X Axis SECTION PROPERTIES Channel B22 B22A B22X Weight Areas of Section Moment of Inertia (I) in.
PAGE 23
B22 Combinations 1.3833 (35.1) 15/8” (41.3) Y Y Y (82.5) X X (82.5) Y 15/8” 15/8” 31/4” (41.3) (41.3) Wt. 5.70 Lbs./Ft. (8.48 kg/m) 31/4” (82.5) (82.5) X X Y Y 31/4” (82.5) 31/4” (82.5) (82.5) B22A3 31/4” X X X 15/8” (41.3) Y 31/4” 31/4” X 1.3540 (34.4) 1.3250 (33.7) Y .725 (18.4) 15/8” (41.3) B22A4 B22AD3 B22B Wt. 7.60 Lbs./Ft. (11.31 kg/m) Wt. 5.70 Lbs./Ft. (8.48 kg/m) Wt. 3.80 Lbs./Ft. (5.65 kg/m) 27/16” (61.9) Y 15/8” Y (41.3) Y 31/4” X 31/4” (82.
PAGE 24
B22 Beam Loading Data Beam Span Channel & Combinations In. mm 12 (305) 18 (457) 24 (609) 30 (762) 36 (914) 42 (1067) 48 (1219) 54 (1371) 60 (1524) 66 (1676) 72 (1829) 78 (1981) 84 (2133) 90 (2286) 96 (2438) 102 (2591) 108 (2743) 114 (2895) 120 (3048) Channel Uniform Load and Deflection Uniform Load @ Deflection = 1/240 Span 1/360 Span Style Lbs. N In. mm Lbs. N Lbs.
PAGE 25
B22 Column Loading Data Unbraced Height In. Channel Style mm (305) 18 (457) 24 (609) 30 (762) 36 (914) 42 (1067) 48 (1219) 54 (1371) 60 (1524) 66 (1676) 72 (1829) 78 (1981) 84 (2133) 90 (2286) 96 (2438) 102 (2591) 108 (2743) 114 (2895) 120 (3048) Max. Column Loading (Loaded @ C.G.) K = .65 K = 1.0 K = 1.2 Lbs. N Lbs. N Lbs. N Lbs. N Lbs.
PAGE 26
B24 Channel & Combinations B24 • Thickness: 14 Gauge (1.9 mm) • Standard lengths: 10’ (3.05 m) & 20’ (6.09 m) • Standard finishes: Plain, Dura-Green, Pre-Galvanized, Hot-Dipped Galvanized, Stainless Steel Type 304 or 316, Aluminum • Weight: 1.40 Lbs./Ft. (2.08 kg/m) 15/8” (41.3) 3/8” (9.5) 3/8” (9.5) 7/8” (22.2) 9/32” Y 15/8” X (41.3) (7.1) X .7304 (18.6) Channel & Combinations 13/16” (20.6) X - X Axis SECTION PROPERTIES Channel lbs./ft. B24 B24A Areas of Section Weight kg/m 1.442 (2.
PAGE 27
B24 Beam & Column Loading Data BEAM LOADING Beam Span In. mm (305) 24 (609) 36 (914) 48 (1219) 60 (1524) 72 (1829) 84 (2133) 96 (2438) 108 (2743) 120 (3048) Uniform Load @ Deflection = 1/240 Span 1/360 Span Lbs. N Lbs. N Uniform Load and Deflection Lbs. N In. mm 1750 1750* 1379 1750* 919 1750* 689 1750* 551 1518 460 1265 394 1084 345 949 306 843 276 759 B24 B24A B24 B24A B24 B24A B24 B24A B24 B24A B24 B24A B24 B24A B24 B24A B24 B24A B24 B24A .014 .002 .057 .014 .128 .048 .227 .115 .
PAGE 28
B26 Channel & Combinations B26 • Thickness: 16 Gauge (1.5 mm) • Standard lengths: 10’ (3.05 m) & 20’ (6.09 m) • Standard finishes: Plain, Dura-Green, Pre-Galvanized • Weight: 1.12 Lbs./Ft. (1.66 kg/m) 15/8” (41.3) 3/8” (9.5) 3/8” (9.5) 7/8” (22.2) 9/32” 27/64” Y (7.1) (10.7) X 15/8” (41.3) X 27/64” .7745 (19.7) (10.7) 13/16” Y Channel & Combinations (20.6) X - X Axis SECTION PROPERTIES Channel B26 B26A Areas of Section Weight lbs./ft. kg/m 1.234 2.467 (1.84) (3.67) sq. in.
PAGE 29
B26 Beam & Column Loading Data BEAM LOADING Beam Span mm 12 (305) 24 (609) 36 (914) 48 (1219) 60 (1524) 72 (1829) 84 (2133) 96 (2438) 108 (2743) 120 (3048) Uniform Load @ Deflection = 1/240 Span 1/360 Span Uniform Load and Deflection Style Lbs. N In. mm Lbs. N Lbs. N B26 B26A B26 B26A B26 B26A B26 B26A B26 B26A B26 B26A B26 B26A B26 B26A B26 B26A B26 B26A 1220 1220* 1163 1220* 775 1220* 581 1220* 465 1220* 388 1052 332 902 291 789 258 702 233 631 (5427) (5427) .014 .001 .
PAGE 30
B32 Channel & Combinations B32 • Thickness: 12 Gauge (2.6 mm) • Standard lengths: 10’ (3.05 m) & 20’ (6.09 m) • Standard finishes: Plain, Dura-Green, Pre-Galvanized, Hot-Dipped Galvanized, Stainless Steel Type 304 • Weight: 1.70 Lbs./Ft. (2.53 kg/m) 15/8” (41.3) 3/8” (9.5) 3/8” (9.5) 7/8” (22.2) 9/32” Y 13/8” (7.1) X X (34.9) .6052 (15.4) Channel & Combinations 13/16” (20.6) X - X Axis SECTION PROPERTIES Channel B32 B32A Areas of Section Weight Y Moment of Inertia (I) in.
PAGE 31
B32 Beam & Column Loading Data BEAM LOADING Beam Span mm 12 (305) 24 (609) 36 (914) 48 (1219) 60 (1524) 72 (1829) 84 (2133) 96 (2438) 108 (2743) 120 (3048) Uniform Load @ Deflection = 1/240 Span 1/360 Span Uniform Load and Deflection Style Lbs. N In. mm Lbs. N Lbs. N B32 B32A B32 B32A B32 B32A B32 B32A B32 B32A B32 B32A B32 B32A B32 B32A B32 B32A B32 B32A 2210 2210* 1299 2210* 866 2210* 649 1817 520 1454 433 1211 371 1038 325 909 289 808 260 727 (9830) (9830) .016 .003 .
PAGE 32
B42 Channel & Combinations B42 • Thickness: 12 Gauge (2.6 mm) • Standard lengths: 10’ (3.05 m) & 20’ (6.09 m) • Standard finishes: Plain, Dura-Green, Pre-Galvanized, Hot-Dipped Galvanized, Stainless Steel Type 304 • Weight: 1.44 Lbs./Ft. (2.14 kg/m) Note: Also available in 14 gauge (1.9mm) material as B44 15/8” (41.3) 3/8” (9.5) 3/8” (9.5) 7/8” (22.2) 1” (25.4) X Channel & Combinations B42 B42A lbs./ft. kg/m 1.468 2.936 (2.18) Areas of Section Moment of Inertia (I) sq. in. cm2 .432 .864 (4.
PAGE 33
B42 Beam & Column Loading Data BEAM LOADING Beam Span mm 12 (305) 24 (609) 36 (914) 48 (1219) 60 (1524) 72 (1829) 84 (2133) 96 (2438) 108 (2743) 120 (3048) Uniform Load @ Deflection = 1/240 Span 1/360 Span Uniform Load and Deflection Style Lbs. N In. mm Lbs. N Lbs. N B42 B42A B42 B42A B42 B42A B42 B42A B42 B42A B42 B42A B42 B42A B42 B42A B42 B42A B42 B42A 1538 1590* 769 1590* 513 1428 384 1071 308 857 256 714 220 612 192 535 171 476 154 428 (6841) (7072) .022 .005 .088 .
PAGE 34
B52 Channel & Combinations B52 • Thickness: 12 Gauge (2.6 mm) • Standard lengths: 10’ (3.05 m) & 20’ (6.09 m) • Standard finishes: Plain, Dura-Green, Pre-Galvanized, Hot-Dipped Galvanized • Weight: 1.27 Lbs./Ft. (1.89 kg/m) 15/8” (41.3) 3/8” (9.5) 3/8” (9.5) 7/8” (22.2) 13/16” 9/32” Y (20.6) (7.1) X X Y .3366 (8.5) 13/16” Channel & Combinations (20.6) X - X Axis SECTION PROPERTIES Channel B52 B52A Weight Areas of Section lbs./ft. kg/m sq. in. cm2 1.313 2.627 (1.95) .386 .773 (3.
PAGE 35
B52 Beam & Column Loading Data BEAM LOADING Beam Span mm 12 (305) 24 (609) 36 (914) 48 (1219) 60 (1524) 72 (1829) 84 (2133) 96 (2438) 108 (2743) 120 (3048) Uniform Load @ Deflection = 1/240 Span 1/360 Span Uniform Load and Deflection Style Lbs. N In. mm Lbs. N Lbs. N B52 B52A B52 B52A B52 B52A B52 B52A B52 B52A B52 B52A B52 B52A B52 B52A B52 B52A B52 B52A 1079 1270* 539 1270* 360 1013 270 759 216 608 180 506 154 434 135 380 120 338 108 304 (4799) (5649) .026 .006 .106 .
PAGE 36
B54 Channel & Combinations B54 • Thickness: 14 Gauge (1.9 mm) • Standard lengths: 10’ (3.05 m) & 20’ (6.09 m) • Standard finishes: Plain, Dura-Green, Pre-Galvanized, Hot-Dipped Galvanized, Stainless Steel Type 304 or 316, Aluminum • Weight: .97 Lbs./Ft. (1.44 kg/m) 15/8” (41.3) 3/8” (9.5) 3/8” (9.5) 7/8” (22.2) 9/32” Y 13/16” (20.6) (7.1) X X Y .3422 (8.7) 13/16” Channel & Combinations (20.6) X - X Axis SECTION PROPERTIES Channel B54 B54A Areas of Section Weight lbs./ft. kg/m 1.016 2.
PAGE 37
B54 Beam & Column Loading Data BEAM LOADING Beam Span In. Channel mm (305) 24 (609) 36 (914) 48 (1219) 60 (1524) 72 (1829) 84 (2133) 96 (2438) 108 (2743) 120 (3048) Style Lbs. N In. mm Lbs. N Lbs. N B54 B54A B54 B54A B54 B54A B54 B54A B54 B54A B54 B54A B54 B54A B54 B54A B54 B54A B54 B54A 870 870* 465 870* 310 832 233 624 186 499 155 416 133 357 116 312 103 277 93 250 (3870) (3870) .027 .005 .108 .043 .243 .141 .432 .250 .676 .391 .973 .563 1.324 .766 1.730 1.001 2.189 1.
PAGE 38
B56 Channel & Combinations B56 • Thickness: 16 Gauge (1.5 mm) • Standard lengths: 10’ (3.05 m) & 20’ (6.09 m) • Standard finishes: Plain, Dura-Green, Pre-Galvanized, Hot-Dipped Galvanized • Weight: .85 Lbs./Ft. (1.26 kg/m) 15/8” (41.3) 7/8” (22.2) 3/8” (9.5) 3/8” (9.5) 9/32” Y 13/16” (20.6) X (7.1) .3706 (9.4) X Y 27/64” 13/16” (10.7) Channel & Combinations (20.6) X - X Axis SECTION PROPERTIES Channel B56 B56A Weight lbs./ft. kg/m .894 1.789 (1.33) (2.66) Areas of Section sq. in. cm2 .
PAGE 39
B56 Beam & Column Loading Data BEAM LOADING Beam Span mm 12 (305) 24 (609) 36 (914) 48 (1219) 60 (1524) 72 (1829) 84 (2133) 96 (2438) 108 (2743) 120 (3048) Uniform Load @ Deflection = 1/240 Span 1/360 Span Uniform Load and Deflection Style Lbs. N In. mm Lbs. N Lbs. N B56 B56A B56 B56A B56 B56A B56 B56A B56 B56A B56 B56A B56 B56A B56 B56A B56 B56A B56 B56A 610 610* 405 610* 270 610* 202 530 162 424 135 353 116 303 101 265 90 236 81 212 (2713) (2713) .027 .004 .109 .035 .
PAGE 40
Telescoping Channel BTS22TH • Can be secured at any point of system • Order BTS22TH & B22TH separately • Thickness: 12 Gauge (1.5 mm) • Standard lengths: 10’ (3.05 m) • Standard finishes: Dura-Green, Yellow Zinc Dichromate, Hot-Dipped Galvanized Slip Load Data Resistance to slip* 3600 lbs. Resistance to slip* 700 lbs. Channel & Combinations 1/4” thick 2-hole fitting with (2) 1/2” bolts & channel nuts. Typical of many standard fittings.
PAGE 41
Telescoping Channel BEAM LOADING DATA B22TH Beam Load Data x-x Axis Beam Allowable Resulting Allowable Load Span Load Deflection @ Deflection= in lbs* in 1/240 Span 12 24 36 48 60 72 84 96 108 120 2225 1610 1071 800 637 528 449 390 344 306 0.015 0.061 0.136 0.243 0.379 0.546 0.743 0.970 1.228 1.516 Beam Span 3225 1610 1071 658 417 286 206 153 116 90 B22TH BTS22TH 12 24 36 48 60 72 84 96 108 120 4203 2099 1396 1044 831 689 587 510 450 401 0.012 0.050 0.112 0.200 0.312 0.450 0.612 0.799 1.012 1.
PAGE 42
Channel Hole Patterns B11SH THRU B56SH SH TYPE CHANNEL • For beam loads use 90% of Channel Loading Chart Height H Part No. B11SH B12SH B22SH B24SH B26SH B32SH B42SH B52SH B54SH B56SH Thickness 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 14 Ga. (1.9) 16 Ga. (1.5) 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 14 Ga. (1.9) 16 Ga. (1.5) In. 31/4” 27/16” 15/8” 15/8” 15/8” 13/8” 1” 13/16” 13/16” 13/16” mm (82.5) (61.9) (41.3) (41.3) (41.3) (34.9) (25.4) (20.6) (20.6) (20.6) Weight Lbs./Ft. kg/m 2.97 2.39 1.82 1.34 1.
PAGE 43
Channel Hole Patterns B22TH (TH TYPE CHANNEL) 9/16” Dia. Holes (14.3) • For beam loads use 90% of Channel Loading Chart Height H Part No. Thickness B22TH 12 Ga. (2.6) In. mm 15/8” (41.3) Weight Lbs./Ft. 1.76 kg/m (2.62) 17/8” Typ. (47.6) 15/16” H (23.8) 13/16” (20.6) B11KO6 THRU B56KO6 (KO6 TYPE KNOCKOUT CHANNEL) • For beam loads use 90% of Channel Loading Chart Thickness 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 14 Ga. (1.9) 16 Ga. (1.5) 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 14 Ga. (1.
PAGE 44
Channel Hole Patterns B11S58 THRU B56S58 S58 TYPE CHANNEL • For beam loads use 90% of Channel Loading Chart Part No. B11S58 B12S58 B22S58 B24S58 B26S58 B32S58 B42S58 B52S58 B54S58 B56S58 Thickness 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 14 Ga. (1.9) 16 Ga. (1.5) 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 14 Ga. (1.9) 16 Ga. (1.5) Height H In. mm 1 3 /4” (82.5) 27/16” (61.9) 15/8” (41.3) 15/8” (41.3) 15/8” (41.3) 13/8” (34.9) 1” (25.4) 13/16” (20.6) 13/16” (20.6) 13/16” (20.6) 13/8” (34.9) Typ. Weight Lbs.
PAGE 45
Channel & Combinations - Notes Channel & Combinations 43
PAGE 46
Channel Nuts & Hardware Channel Nuts Cooper B-Line’s channel nut is one of the main components of our metal framing system. It is designed to provide essential gripping power and ease during installation. Channel nuts are press formed, machined and hardened from steel which meets the requirements of ASTM A108 or ASTM A36 for our larger sizes.
PAGE 47
Channel Nuts & Hardware STANDARD CHANNEL NUTS Numbering Example: Nut Type N = Standard Nut TN = Twirl Nut SN = Stud Nut STN = Stud Twirl Nut NW = Combo Nut Washer N 7 25 (*) WO Channel Type 7 = Tall Channels B11 B12 2 = Medium Channels B22 B24 B26 B32 5 = Short Channels B42 B52 B54 B56 Thread Size 21 = #8-32 22 = #10-24 27 = #10-32 24 = 1/4-20 23 = 5/16-18 28 = 3/8-16 26 = 7/16-14 25 = 1/2-13 55 = 5/8-11 75 = 5/8-11 78 = 7/8-9 Stud Length * = Specify Length of stud below for Stud Nut or Twirl Stud Nuts
PAGE 48
Channel Nuts Note: See page 50 for resistance to slip & page 51 for pull-out strength. NUT WITHOUT SPRING Part No.
PAGE 49
Channel Nuts Note: See page 50 for resistance to slip & page 51 for pull-out strength. 700 Series 200 Series 500 Series SPRING NUT Part No.
PAGE 50
Channel Nuts Note: See page 50 for resistance to slip & page 51 for pull-out strength. TWIRL-NUT™ Patented Part No. TN221 TN227 TN222 TN224 TN223 TN228 TN226 TN225 TN525 TN255 Metric Threads BMT-6 BMT-8 BMT-10 BMT-12 BMT-D-12 Thread Size #8-32 #10-32 #10-24 1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 1/2-13 5/8-11 M6 x 1 M8 x 1.25 M10 x 1.5 M12 x 1.75 M12 x 1.
PAGE 51
Channel Nuts Note: See page 50 for resistance to slip & page 51 for pull-out strength. 700 Series 200 Series 500 Series STUD NUT WITH SPRING Part No. Thread Size SN724-* 1/4-20 SN224-* 1/4-20 Fits Channel Sizes Nut Thickness Wt./C Lbs. kg B11 & B12 1/4” (6.3) 8.1 (3.66) B22, B24, B26, B32 1/4” (6.3) 8.1 (3.66) SN524-* 1/4-20 B42, B52, B54, B56 1/4” (6.3) 8.1 (3.66) SN728-* 3/8-16 B11 & B12 3/8” (9.5) 12.9 (5.85) SN228-* 3/8-16 B22, B24, B26, B32 3/8” (9.5) 12.
PAGE 52
Channel Nuts RESISTANCE TO SLIP • With Safety Factor of 3 Resistance to Slip Thread Size Nut Part Numbers 12 ga. Channel Lbs. 16 ga. Channel Lbs. N Lbs.
PAGE 53
Channel Nuts PULL-OUT STRENGTH • With Safety Factor of 3 • Maximum pullout strength for B11 & B12 channels is limited to 1500 lbs. (6670 N). Pull-Out Strength Thread Size Nut Part Numbers 12 ga. Channel 14 ga. Channel 16 ga. Channel Lbs. N Lbs. N Lbs.
PAGE 54
Hardware DCN 3/8 DOUBLE CONVEYOR NUT • Recommended torque - 19 ft./Lbs. • Allowable slip loading - 700 Lbs.(3.11kN) • Safety Factor of 3 • Material: ASTM 1011SS Gr. 33 • Finish: Electrodeposited zinc ASTM B633 SC1 • Strut ordered separately 2” (50.8) 3” (76.2) 13/8” (34.
PAGE 55
Hardware HHCS SFHMS HEX HEAD CAP SCREWS SLOTTED FLAT HEAD MACHINE SCREWS • Standard finish: Zinc-Plated, Stainless Steel • Standard finish: Zinc-Plated Wt./C Part No.
PAGE 56
Hardware B446A B446B SWIVEL HANGER (FEMALE ONLY) SWIVEL HANGER (MALE ONLY) • Design Load: (3/8)-610 Lbs. (2.71 kN) (1/2)-1130 Lbs. (5.02 kN) (5/8)-1810 Lbs. (8.05 kN) (3/4)-2710 Lbs. (12.05 kN) • Safety Factor of 3 • Standard finish: ZN • Design Load: (3/8)-610 Lbs. (2.71 kN) (1/2)-1130 Lbs. (5.02 kN) (5/8)-1810 Lbs. (8.05 kN) (3/4)-2710 Lbs. (12.05 kN) • Safety Factor of 3 • Standard finish: ZN A 13/4” (44.4) R 13/4” (44.4) R B Wt./C Wt./C Part No.
PAGE 57
Hardware B617 Fig. 75 SHOULDER BOLT SWIVEL ATTACHMENT • Standard finish: ZN • Wt./C 6 Lbs. (2.7 kg) • • • • Standard finish: ZN Sized for 3/8”-16 threaded rods UL Listed to support up to 4” Pipe per NFPA 13 Wt./C 13 Lbs. (5.9 kg) 3/8”-16 Thread Size 2” (50.8) HN MSQN HEX NUTS MACHINE SQUARE NUT • Standard finish: Zinc-Plated, Stainless Steel • For use with B755 Beam Clamp • Standard finish: Zinc-Plated Wt./C Part No. HN 5/16” HN Wt./C 1/4” Lbs. kg .7 (.32) MSQN .6 (.27) 1.0 (.
PAGE 58
Hardware Buzznut™ • Can be installed at any desired position on the ATR, eliminating the need to thread hex nuts up along ATR. • Loading Safety Factor of 3. • Torque: 6 ft./lbs (8 Nm) • Available in Zinc Plated or 316 stainless steel. Part No. Thread Size Loading Wt./C Lbs. kN Lbs. kg SLWN1/4 1/4-20 240 (1.07) 14.4 (6.5) SLWN3/8 3/8-16 730 (3.24) 15.4 (7.0) SLWN1/2 1/2-13 1350 (6.00) 18.8 (8.5) SLWN5/8 5/8-11 2100 (9.33) 25.4 (11.5) SLWNM6 M6 200 (0.90) 14.1 (6.
PAGE 59
Hardware SC228B SC228 HANGER ROD STIFFENER • • • • For 3/8” thru 5/8” ATR Strut ordered separately Standard finish: ZN Wt./C 21 Lbs. (9.5 kg) N228WO 3/8”-16 Threads 11/2” SC228BS (63.5) Fig. 98 ROD STIFFENER • • • • • For 3/8” thru 7/8” ATR Use with 12 ga. strut only, ordered separately Secres channel to hanger rod for vertical seismic bracing Standard finish: ZN Wt./C 11 Lbs. (5.0 kg) Fig. 98B ROD STIFFENER w/BREAK-OFF BOLT HEAD For 3/8” thru 7/8” ATR Use with 12 ga.
PAGE 60
Hardware ATR ALL THREADED ROD • Available in 36” (91.4 cm), 72” (182.9 cm), 120” (304.8 cm), 144” (365.7 cm) lengths • Safety Factor of 5 on recommended load • Standard finish: Zinc-Plated, Stainless Steel Type 304 Part No. & Size ATR ATR ATR ATR ATR ATR ATR ATR Threads Per Inch 1/4” 20 18 16 13 11 10 9 8 5/16” 3/8” 1/2” 5/8” 3/4” 7/8” 1” Recommended Load Lbs. 240 400 730 1350 2160 3230 4480 5900 Wt./C Ft. (3048.0 cm) kN Lbs. kg (1.07) 12 19 29 53 89 123 170 225 (5.44) (1.78) (3.24) (6.
PAGE 61
KwikWire™ Hardware Clamps For Use With Wire Rope Diameters Part No. BKC100 1/16” & 3/32” BKC200 1/8” 3/16” & Box Qty. 100 50 See table below for KwikWire™ Clamp Working Loads KwikWire™ Clamp Working Loads* Wire Rope Dia. Lbs. Safety Factor 5 BKC100 BKC100 1/16” 0-75 25-150 BKC200 BKC200 1/8” Clamp Part No. 3/32” 3/16” *Working loads shown are for hanging vertically.
PAGE 62
KwikWire™ Hardware Wire Rope & Clamps KwikPak Part No. BKP10063 BKP10094 BKP20125 BKP20188 For Use With Wire Rope Diameters Box Qty. BKC100 (100 pcs.) Wire Rope (500 ft.) 1 BKC100 (100 pcs.) Wire Rope (500 ft.) 1 BKC200 (50 pcs.) Wire Rope (500 ft.) 1 BKC200 (50 pcs.) Wire Rope (250 ft.) 1 1/16”Ø 3/32”Ø 1/8”Ø 3/16”Ø KwikPak™ makes handling KwikWire™ a breeze! • KwikPaks include KwikWire clamps and a spool of wire rope.
PAGE 63
KwikWire™ Hardware • KwikWire hanger combines the versatility of a bolt with an adjustable wire rope solution. • Can be quickly installed in existing anchors or metal brackets with a nut. Hanger Part No. • ARS, ARC, and ARW anchors are ideal for use with KwikWire Hangers. BKF100-4 BKF100-6 • Ideal for supporting light fixtures, wire basket cable tray, HVAC ducts, and sign/banner supports. Thread Size 1/4”-20 3/8”-16 Wire Rope Dia. Loading* SF5 in. mm Lbs. kg 1/16” (1.6) 45 (20.4) 3/32” (2.
PAGE 64
KwikWire™ Hardware KwikWire Accessory Features • • • • • • • • • Reduces on the job installation time Can be installed quickly without drilling into existing structure Increases versatility in the field KwikWire accessory system reduces inventory and shipping costs No more sawing, filing, or fixing nuts Designed for use with cable tray, lighting, and HVAC Eliminates the need for all threaded rod Cost effective solution for jack chain “Y” style accessories require 50% less drilling Channel Nuts & Hardware
PAGE 65
KwikWire™ Hardware Loop Termination Wire Rope Dia. Part No. Length in. mm in. mm BKL-063-40 1/16” (1.6) 40” (1016) BKL-063-80 1/16” (1.6) 80” (2032) BKL-063-120 1/16” (1.6) 120” (3048) BKL-063-180 1/16” (1.6) 180” (4572) BKL-063-240 1/16” (1.6) 240” (6096) BKL-063-360 1/16” (1.6) 360” (9144) BKL-094-40 3/32” (2.3) 40” (1016) BKL-094-80 3/32” (2.3) 80” (2032) BKL-094-120 3/32” (2.3) 120” (3048) BKL-094-180 3/32” (2.3) 180” (4572) BKL-094-240 3/32” (2.
PAGE 66
KwikWire™ Hardware Single Style Hook Termination Wire Rope Dia. New Part No. Length in. mm in. mm BKH-094-40 3/32” (2.3) 40” (1016) BKH-094-80 3/32” (2.3) 80” (2032) BKH-094-120 3/32” (2.3) 120” (3048) BKH-094-180 3/32” (2.3) 180” (4572) BKH-094-240 3/32” (2.3) 240” (6096) BKH-094-360 3/32” (2.3) 360” (9144) Box Quantity - 20 5 bags containing 4 pieces per bag Single Style Hook Termination Kits New Wire Rope Dia. Length Part No. in. mm in.
PAGE 67
KwikWire™ Hardware ‘Y’ Style Hook Termination Leg Length Part No. BKYH18-094-40 Wire Rope Dia. Length in. mm in. mm in. mm 18” (457) 3/32” (2.3) 40” (1016) (2.3) 80” (2032) BKYH18-094-80 18” (457) 3/32” BKYH18-094-120 18” (457) 3/32” (2.3) 120” (3048) BKYH18-094-180 18” (457) 3/32” (2.3) 180” (4572) BKYH18-094-240 18” (457) 3/32” (2.3) 240” (6096) BKYH18-094-360 18” (457) 3/32” (2.3) 360” (9144) BKYH30-094-40 30” (762) 3/32” (2.
PAGE 68
KwikWire™ Hardware Single Style Toggle Termination Wire Rope Dia. New Part No. Length in. mm in. mm BKT-063-40 1/16” (1.6) 40” (1016) BKT-063-80 1/16” (1.6) 80” (2032) BKT-063-120 1/16” (1.6) 120” (3048) BKT-063-180 1/16” (1.6) 180” (4572) BKT-063-240 1/16” (1.6) 240” (6096) BKT-063-360 1/16” (1.6) 360” (9144) Box Quantity - 20 5 bags containing 4 pieces per bag Single Style Toggle Termination Kits New Wire Rope Dia. Length Part No. in. mm in.
PAGE 69
KwikWire™ Hardware ‘Y’ Style Toggle Termination Leg Length Wire Rope Dia. Length Part No. in. mm in. mm in. mm BKYT12-063-40 BKYT12-063-80 BKYT12-063-120 BKYT12-063-180 BKYT12-063-240 BKYT12-063-360 12” 12” 12” 12” 12” 12” (305) 1/16” (1.6) (1016) (305) 1/16” (1.6) (305) 1/16” (1.6) (305) 1/16” (1.6) (305) 1/16” (1.6) (305) 1/16” (1.
PAGE 70
KwikWire™ Hardware Bolt Termination Thread Size Part No. New Channel Nuts & Hardware Box Quantity - 20 5 bags containing 4 pieces per bag • • • • • Wire Rope Dia. Length in. mm in. mm BKB25-063-40 1/4”-20 1/16” (1.6) 40” (1016) BKB25-063-80 1/4”-20 1/16” (1.6) 80” (2032) BKB25-063-120 1/4”-20 1/16” (1.6) 120” (3048) BKB25-063-180 1/4”-20 1/16” (1.6) 180” (4572) BKB25-063-240 1/4”-20 1/16” (1.6) 240” (6096) BKB25-063-360 1/4”-20 1/16” (1.
PAGE 71
KwikWire™ Hardware Bolt Termination Kits Part No. Wire Rope Dia. Length in. mm in. mm BKB25-063-40K 1/4”-20 1/16” (1.6) 40” (1016) BKB25-063-80K 1/4”-20 1/16” (1.6) 80” (2032) BKB25-063-120K 1/4”-20 1/16” (1.6) 120” (3048) BKB25-063-180K 1/4”-20 1/16” (1.6) 180” (4572) BKB25-063-240K 1/4”-20 1/16” (1.6) 240” (6096) BKB25-063-360K 1/4”-20 1/16” (1.6) 360” (9144) BKB38-094-40K 3/8”-16 3/32” (2.3) 40” (1016) BKB38-094-80K 3/8”-16 3/32” (2.
PAGE 72
KwikWire™ Hardware Angle Bracket Termination New Wire Rope Dia. Part No. Length in. mm in. mm BKA-063-40 1/16” (1.6) 40” (1016) BKA-063-80 1/16” (1.6) 80” (2032) BKA-063-120 1/16” (1.6) 120” (3048) BKA-063-180 1/16” (1.6) 180” (4572) BKA-063-240 1/16” (1.6) 240” (6096) BKA-063-360 1/16” (1.6) 360” (9144) Box Quantity - 20 5 bags containing 4 pieces per bag Angle Bracket Termination Kits Channel Nuts & Hardware New Wire Rope Dia. Length Part No. in. mm in.
PAGE 73
Hardware - Notes Channel Nuts & Hardware 71
PAGE 74
Fittings This section offers a full selection of fittings and accessories to complete Cooper B-Line’s metal framing system. Fittings are made from hot rolled, pickled and oiled plate or strip steel in accordance with ASTM A1018 33,000 PSI min. yield, unless noted. Dimensions The following dimensions apply to all fittings except as noted: Hole Spacing – 17/8” (47.6 mm) on center Hole Spacing – 13/16” (20.6 mm) from end Hole Size – 9/16” (14.3 mm) diameter Thickness – 1/4” (6.3 mm) Width – 15/8” (41.
PAGE 75
Flat Plate Fittings B200-B202-2 SQUARE WASHER • Standard finishes: ZN, GRN, HDG, SS4, SS6, AL Part No. B200 B201 B202 B202-1 B202-2 15/8” (41.3) Hole Size A B129 A (A) 3/8” (9.5) 7/16” (11.1) 9/16” 11/16” (14.2) 13/16” (20.6) (17.4) Bolt 5/16” 3/8” 1/2” 5/8” 3/4” Size (7.9) (9.5) (12.7) (15.9) (19.0) B200D-B202-2D NO TWIST SQUARE WASHER • Standard finishes: ZN, GRN, HDG, SS4, SS6, AL Part No. B200D B201D B202D B202-1D B202-2D 15/8” (41.3) A Hole Size TWO HOLE SPLICE PLATE Wt.
PAGE 76
Flat Plate Fittings B138 B139 B504 TWO HOLE SWIVEL PLATE THREE HOLE SWIVEL PLATE FOUR HOLE SPLICE PLATE • Standard finishes: ZN, GRN • Wt./C 48 Lbs. (21.8 kg) • Standard finishes: ZN, GRN • Wt./C 69 Lbs. (31.3 kg) • Standard finishes: ZN, GRN • Wt./C 73 Lbs. (33.1 kg) 45/8” (117.5) 61/2” (165.1) 3” (76.2) 17/8” 15/8” (41.3) 31/2” (88.9) 3” 31/4” (82.5) (76.2) (47.
PAGE 77
Flat Plate Fittings B137 B556 B337 FOUR HOLE CORNER GUSSET PLATE FIVE HOLE CORNER GUSSET PLATE THREE HOLE TEE GUSSET PLATE • Standard finishes: ZN, GRN • Wt./C 273 Lbs. (123.8 kg) • Standard finishes: ZN, GRN • Wt./C 145 Lbs. (65.8 kg) • Standard finishes: ZN, GRN • Wt./C 70 Lbs. (31.7 kg) 75/8” 25/16” (58.7) (193.7) 13 5 /16” (147.6) 1” 31/2” 53/8” (25.4) (88.9) (136.5) 75/8” 53/8” (136.5) (193.7) 31/2” (88.9) 31/2” (88.9) 1” (25.
PAGE 78
90° Angle Fittings B420-378 B420-578 B420-778 ONE HOLE CORNER ANGLE ONE HOLE CORNER ANGLE ONE HOLE CORNER ANGLE • Standard finishes: ZN, GRN • Wt./C 60 Lbs. (27.2 kg) • Standard finishes: ZN, GRN • Wt./C 85 Lbs. (38.5 kg) • Standard finishes: ZN, GRN • Wt./C 107 Lbs. (48.5 kg) 17/8” (47.6) 17/8” 17/8” (47.6) (47.6) 77/8” (200.0) 57/8” (149.2) 37/8” (98.4) B420-978 B101 B230 ONE HOLE CORNER ANGLE TWO HOLE CORNER ANGLE TWO HOLE CORNER ANGLE • Standard finishes: ZN, GRN • Wt./C 129 Lbs.
PAGE 79
90° Angle Fittings B361 B102 B103 TWO HOLE CORNER ANGLE THREE HOLE CORNER ANGLE THREE HOLE CORNER ANGLE • Standard finishes: ZN, GRN • Wt./C 60 Lbs. (27.2 kg) • Standard finishes: ZN, GRN, HDG, SS4 • Standard finishes: ZN, GRN, HDG, SS4 • Wt./C 56 Lbs. (25.4 kg) • Wt./C 56 Lbs. (25.4 kg) PA ZN GRN ZN GRN PA 15/8” (41.3) 31/2” 4” (88.9) (101.6) 41/8” (104.8) 17/8” (47.6) 21/4” (57.
PAGE 80
90° Angle Fittings B235R B235L B236R THREE HOLE (RIGHT HAND) OFFSET BENT ANGLE THREE HOLE (LEFT HAND) OFFSET BENT ANGLE THREE HOLE (RIGHT HAND) OFFSET BENT ANGLE • 15/8” (41.3) from center to center of the holes that are shown with bolt heads • Standard finishes: ZN, GRN • Wt./C 53 Lbs. (24.0 kg) • 15/8” (41.3) from center to center of the holes that are shown with bolt heads • Standard finishes: ZN, GRN • Wt./C 53 Lbs. (24.0 kg) • Standard finishes: ZN, GRN • Wt./C 65 Lbs. (29.5 kg) 31/4” (82.
PAGE 81
90° Angle Fittings B844 B844W B888W UNIVERSAL SHELF BRACKET UNIVERSAL SHELF BRACKET• Standard finishes: ZN, GRN, HDG, SS4 WELDED UNIVERSAL SHELF BRACKETWELDED • Wt./C 132 Lbs. (59.9 kg) • Standard finishes: ZN, GRN • Wt./C 197 Lbs. (89.4 kg) • Standard finishes: ZN, GRN • Wt./C 134 Lbs. (60.8 kg) 4” 4” (101.6) (101.6) 513/16” (147.6) Welded Corner 4” 4” (101.6) (101.6) 17/8” (47.6) 17/8” (47.6) 53/8” (136.5) 17/8” (47.
PAGE 82
90° Angle Fittings B485 B533 B126 FOUR HOLE GUSSETTED SHELF ANGLE FIVE HOLE GUSSETTED SHELF ANGLE FOUR HOLE GUSSETTED THREE WAY SHELF ANGLE • Standard finishes: ZN, GRN • Wt./C 148 Lbs. (67.1 kg) • Standard finishes: ZN, GRN • Wt./C 141 Lbs. (63.9 kg) • Standard finishes: ZN, GRN • Wt./C 101 Lbs. (45.8 kg) 17/8” (47.6) 15/8” (41.3) 31/2” (88.9) 41/8” (104.8) 53/8” 31/2” (88.9) 21/4” (57.1) 53/8” (136.5) (136.5) 315/16” (100.
PAGE 83
90° Angle Fittings B496 B496-1 B371-2 TWO HOLE ADJUSTABLE CORNER ANGLE • Standard finishes: ZN, GRN • Wt./C 85 Lbs. (38.5 kg) TWO HOLE ADJUSTABLE CORNER ANGLE THREE HOLE ADJUSTABLE CORNER ANGLE • Standard finishes: ZN, GRN, HDG • Wt./C 58 Lbs. (26.3 kg) • Standard finishes: ZN, GRN • Wt./C 61 Lbs. (27.6 kg) 23/8” (60.3) 23/8” (60.3) 15/16” 47/8” 67/8” (33.3) 9/16” (123.8) (174.6) 9/16” x 29/16” (14.3) Slot (65.1) 9/16” 17/8” 17/8” (47.6) (47.6) (14.3) x 29/16” (14.
PAGE 84
Angular Fittings B147-B152 B243-B253 TWO HOLE OPEN ANGLE FOUR HOLE OPEN ANGLE • Standard finishes: ZN, GRN • Standard finishes: ZN, GRN 23/8” (60.3) 11/16” (27.0) Part No. A B147 B148 B149 B150 B151 B152 821/2° Wt./C Lbs. 75° 671/2° 60° 521/2° 371/2° 31/4” A kg (82.5) 11/16” (27.0) 63 (28.6) B162-B165 A (27.0) 35/16” (84.1) B162 B163 B164 B165 30° 221/2° 15° 71/2° Wt./C kg 21/16” (52.4) (26.7) B154 TWO HOLE OPEN ANGLE • Standard finishes: ZN, GRN, SS4 • Wt./C 58 Lbs. (26.
PAGE 85
Angular Fittings B156 - B161 B155 TWO HOLE CLOSED ANGLE TWO HOLE CLOSED ANGLE • Standard finishes: ZN, GRN • Standard finishes: ZN, GRN, HDG, SS4 • Wt./C 63 Lbs. (28.6 kg) PA ZN GRN 13/16” 13/16” Wt./C (20.6) Part No. A B156 B157 B158 B159 B160 B161 821/2° 13/16” 75° 671/2° 60° 521/2° 371/2° (20.6) Lbs. 56 kg (25.4) 31/2” (88.9) (20.6) 33/16” (80.9) 45° A 13/16” 21/2” (63.5) (20.6) 21/2” (63.
PAGE 86
Angular Fittings B634 B635 SINGLE CHANNEL ADJUSTABLE BRACE DOUBLE CHANNEL ADJUSTABLE BRACE • Standard finishes: ZN, GRN • Wt./C 306 Lbs. (138.8 kg) • Standard finishes: ZN, GRN • Wt./C 518 Lbs. (234.9 kg) 13/16” 13/16” (20.6) (20.6) 15/8” (41.3) 15/8” (41.3) 30° MIN. 17/8” (47.6) 17/8” (47.6) 33/4” (95.2) 53/8” 33/4” (95.2) 53/8” (136.5) (136.5) B129 B650 SERIES SEISMIC RETROFIT BRACKET • OSHPD approved for Seismic Zone 4. • Available for 3/8”, 1/2”, 5/8”, and 3/4” threaded rods.
PAGE 87
Braces B261 - TWO HOLE 45° KNEE BRACE • Standard finishes: ZN, GRN • Design load determined by testing using a B335 hinged corner connection. • Load ratings are for brace members only. Do not exceed allowable beam or column loads for strut channels. • Safety Factor of 3 Design Load Part No. A (A) B261-8 B261-12 B261-16 B261-18 B261-24 B261-36 8” 12” 165/8” 18” 24” 36” (203.2) (304.8) (422.3) (457.2) (609.6) (914.4) B (B) 73/8” (187.3) 101/8” (257.2) 133/8” (339.7) 147/16” (366.7) 1811/16” (474.
PAGE 88
Clevis Fittings B169 B168 B167 TWO HOLE SPLICE CLEVIS FOR B52 THREE HOLE SPLICE CLEVIS FOR B52 FOUR HOLE SPLICE CLEVIS FOR B52 • Standard finishes: ZN, GRN • Wt./C 84 Lbs. (38.1 kg) • Standard finishes: ZN, GRN • Wt./C 126 Lbs. (57.1 kg) • Standard finishes: ZN, GRN • Wt./C 178 Lbs. (80.7 kg) PA 1/4” (6.3) 31/2” (88.9) GRN 71/4” (184.1) 53/8” (136.5) 1/4” (6.3) 1/4” (6.
PAGE 89
‘U’ Fittings B527 B116-52 B116-42 THREE HOLE OFFSET PLATE CONNECTION THREE HOLE U-SUPPORT THREE HOLE U-SUPPORT • Standard finishes: ZN, GRN • Wt./C 70 Lbs. (31.7 kg) • Standard finishes: ZN, GRN • Wt./C 75 Lbs. (34.0 kg) • Standard finishes: ZN, GRN • Wt./C 54 Lbs. (24.5 kg) 1/2” (12.7) 13/16” 1” (20.6) (25.4) 57/16” (138.1) 57/16” (138.1) 55/16” (134.9) B116-32 B116-32A B116-12 THREE HOLE U-SUPPORT THREE HOLE U-SUPPORT THREE HOLE U-SUPPORT • Standard finishes: ZN, GRN • Wt./C 84 Lbs.
PAGE 90
‘U’ Fittings B412 B107S B596 THREE HOLE OFFSET U-SUPPORT FIVE HOLE U-SUPPORT THREE HOLE SWIVEL CLEVIS • Material: 7 Gauge (4.5) ASTM A1011 33,000 PSI min. yield • Standard finishes: ZN, GRN • Wt./C 51 Lbs. (23.1 kg) • Standard finishes: ZN, GRN • Wt./C 53 Lbs. (24.0 kg) • Standard finishes: ZN, GRN • Wt./C 89 Lbs. (40.3 kg) 57/16” (138.1) 33/4” (95.2) 13/16” (20.6) 13/8” 1” (34.9) 17/8” (25.4) (47.6) 13/4” (44.4) 21/4” (57.1) 7/16” (11.1) Dia. 4 Holes 9/16” (14.3) Dia. 15/8” (41.
PAGE 91
‘U’ Fittings B333 B451 SLOTTED THREE HOLE U-SUPPORT FOR B22 SLOTTED THREE HOLE U-SUPPORT WITH GUSSET FOR B22 A • Standard finishes: ZN, GRN • Consists of B333-1, 2, or 3 with gusset plate welded on back. • Material: ASTM A1011 HSLAS Gr. 50 • Standard finishes: ZN, GRN C 9/16” A x 11/2” (14.3) Slots-(2) (38.1) 9/16” x 11/2” (14.3) Slots-(2) (38.1) 15/8” (41.3) B Part No. Wt./C A B333-1 B333-2 B333-3 (A) B (B) C 71/2” (190.5) 15/16” (33.3) 81/2” (215.9) 115/16” (49.2) 103/8” (263.
PAGE 92
‘U’ Fittings B398-1 B415 THREE HOLE CUP SUPPORT TWO HOLE BUS DUCT CONNECTION • Standard finishes: ZN, GRN • Wt./C 73 Lbs. (33.1 kg) • Standard finishes: ZN, GRN • Wt./C 56 Lbs. (25.4 kg) 17/8” (47.6) 111/16” (42.9) 23/32” (53.2) 11/16” (27.0) 15/8” (41.3) 111/16” 325/32” (42.9) (96.0) 1/2” (12.7) 11/16” (27.0) B400 B400-1 B400-2 THREE STUD RING CONNECTION ONE STUD RING CONNECTION ONE STUD RING CONNECTION • 1/2”-13 stud protrudes 1” (25.4mm) • Standard finishes: ZN • Wt./C 85 Lbs. (38.
PAGE 93
‘Z’ Fittings B526 B106-52 B106-42 TWO HOLE OFFSET Z-SUPPORT TWO HOLE Z-SUPPORT FOR B52 TWO HOLE Z-SUPPORT FOR B42 • Standard finishes: ZN, GRN • Wt./C 38 Lbs. (17.2 kg) • Standard finishes: ZN, GRN • Wt./C 40 Lbs. (18.1 kg) • Standard finishes: ZN, GRN • Wt./C 44 Lbs. (20.0 kg) 1/4” (6.3) 315/32” 13/16” 1” (20.6) (25.4) (88.1) 15/8” 31/2” (88.9) 31/2” (88.9) (41.
PAGE 94
‘Z’ Fittings B387 B407 TWO HOLE Z-BUS DUCT CONNECTION TWO HOLE Z-SUPPORT • Standard finishes: ZN, GRN • Standard finishes: ZN, GRN 15/8” 31/2” (88.9) (41.3) 15/8” (41.3) 31/2” (88.9) 1/2” (12.7) Part No. B387 B387-1 B387-2 A (A) Lbs. 43/4” (120.6) 325/32” (96.0) 213/32” (61.1) kg 89 (40.3) 78 (35.4) 62 (28.1) Wt./C Part No. A B407-4 4” B407-5 5” B407-6 6” B407-7 7” B407-8 8” B407-95/8 95/8” Wt./C A A (A) Lbs. kg (101.6) 77 95 98 105 120 138 (34.9) (127.0) (152.4) (177.8) (203.
PAGE 95
‘Z’ Fittings B410-52 B410-32 B410-22 CHANNEL HANGER BRACKET FOR B52 CHANNEL HANGER BRACKET FOR B32 CHANNEL HANGER BRACKET FOR B22 • Material: 11 Gauge (3.0) ASTM A1011 HSLAS Gr. 50 • Standard finishes: ZN, GRN • Wt./C 6.7 Lbs. (3.0 kg) • Material: 11 Gauge (3.0) ASTM A1011 HSLAS Gr. 50 • Standard finishes: ZN, GRN • Wt./C 8.3 Lbs. (3.7 kg) • Material: 11 Gauge (3.0) ASTM A1011 HSLAS Gr. 50 • Standard finishes: ZN, GRN • Wt./C 9 Lbs. (4.1 kg) 13/16” 9/32” (7.1) 13/16” 13/16” (20.6) (20.6) (20.
PAGE 96
Wing Fittings B267R B267L B270R THREE HOLE SINGLE CORNER CONNECTION (RIGHT HAND) THREE HOLE SINGLE CORNER CONNECTION (LEFT HAND) FOUR HOLE SINGLE CORNER CONNECTION (RIGHT HAND) • Standard finishes: ZN, GRN • Wt./C 54 Lbs. (24.5 kg) • Standard finishes: ZN, GRN • Wt./C 54 Lbs. (24.5 kg) • Standard finishes: ZN, GRN • Wt./C 77 Lbs. (34.9 kg) 111/16” 21/16” 21/16” (52.4) (52.4) (42.8) 21/16” (52.4) 15/8” (41.3) 15/8” (41.3) 31/2” (88.9) 31/2” (88.9) 313/16” (96.
PAGE 97
Wing Fittings B120 B121 B271 SIX HOLE DOUBLE CORNER CONNECTION EIGHT HOLE DOUBLE CORNER CONNECTION FIVE HOLE DOUBLE WING CONNECTION • Standard finishes: ZN, GRN • Wt./C 110 Lbs. (49.9 kg) • Standard finishes: ZN, GRN • Wt./C 152 Lbs. (68.9 kg) • Standard finishes: ZN, GRN • Wt./C 95 Lbs. (43.1 kg) 57/16” (138.1) 15/8” 31/2” (88.9) 315/16” (41.3) (100.0) 315/16” 21/16” (100.0) (52.4) 15/8” (41.3) 31/2” 53/8” (88.9) (136.5) 111/16” (42.
PAGE 98
Wing Fittings B274R B274L B495 EIGHT HOLE SINGLE CORNER GUSSETTED CONNECTION (RIGHT HAND) EIGHT HOLE SINGLE CORNER GUSSETTED CONNECTION (LEFT HAND) TEN HOLE DOUBLE WING GUSSETTED CONNECTION • Standard finishes: ZN, GRN • Wt./C 176 Lbs. (79.8 kg) • Standard finishes: ZN, GRN • Wt./C 176 Lbs. (79.8 kg) 511/16” • Standard finishes: ZN, GRN • Wt./C 240 Lbs. (108.8 kg) 93/16” (233.4) 521/32” (144.5) (143.7) 315/16” (100.0) 31/2” 37/8” (98.4) 315/16” (100.0) 31/2” (88.9) 31/2” (88.9) (88.
PAGE 99
Post Bases B279 B279SQ B279FL POST BASE FOR B22 POST BASE FOR B22 POST BASE FOR B22 • Standard finishes: ZN, GRN • Wt./C 314 Lbs. (142.4 kg) • Standard finishes: ZN, GRN • Wt./C 314 Lbs. (142.4 kg) • Standard finishes: ZN, GRN • Wt./C 230 Lbs. (104.3 kg) 3/4” (19.0) Dia .2 Holes 111/16” (42.8) 3/4” (19.0) Dia .4 Holes 111/16” (42.8) 6” (152.4) 111/16” 3/4” (19.0) Dia .4 Holes 15/8” (41.3) (41.3) 41/4” (107.9) 6” 8” 41/4” (203.2) (107.9) (152.4) 6” (42.8) 15/8” 61/4” (158.
PAGE 100
Post Bases B281 B281SQ B281FL POST BASE FOR B22A, B, C, ETC. POST BASE FOR B22A, B, C, ETC. POST BASE FOR B22A, B, C, ETC. • Standard finishes: ZN, GRN, HDG • Wt./C 400 Lbs. (181.4 kg) • Standard finishes: ZN, GRN, HDG, SS4 • Wt./C 400 Lbs. (181.4 kg) • Standard finishes: ZN, GRN • Wt./C 320 Lbs. (145.1 kg) 3/4” (19.0) 35/16” Dia. 4 Holes (84.1) 35/16” 31/2” (84.1) (88.9) 3/4” (19.0) 3/4” (19.0) Dia. 4 Holes Dia. 2 Holes 35/16” (84.1) 31/2” (88.9) 6” 31/2” (88.9) (152.
PAGE 101
Brackets B187 BRACKET B188 BRACKET • Uniform Loading 1450 Lbs. (6.45 kN) • Safety Factor of 2.5 • Hole Spacing on Bracket Top 55/16” (150.8) Center to Center • Standard finishes: ZN, GRN • Wt./C 193 Lbs. (87.5 kg) • Uniform Loading 1080 Lbs. (4.80 kN) • Safety Factor of 2.5 • Hole Spacing on Bracket Top 815/16” (227.0) Center to Center • Standard finishes: ZN, GRN • Wt./C 241 Lbs. (109.3 kg) 21/4” (57.1) 11/16” (27.0) 11/16” 21/4” (57.1) (27.0) 4” 9” (101.6) (228.6) 4” (101.6) 12” (304.
PAGE 102
Brackets B191-24 24” (609.6) BRACKET • • • • 11/16” (27.0) B192 24” (609.6) BRACKET 11/16” Uniform Loading 450 Lbs. (2.00 kN) Safety Factor of 2.5 Standard finishes: ZN, GRN Wt./C 377 Lbs. (171.0 kg) • • • • (27.0) Uniform Loading 820 Lbs. (3.65 kN) Safety Factor of 2.5 Standard finishes: ZN, GRN Wt./C 576 Lbs. (261.3 kg) 4” (101.6) 6” (152.4) 24” 24” (609.6) (609.6) 12” 27/16” 71/2” (61.9) (190.5) 9/16” (304.8) 9/16” x 3” Slot (14.3) (76.2) x 3” Slot (14.3) (76.2) 2” 2” (50.8) (50.
PAGE 103
Brackets B292 201/2” (520.7) BRACKET B297 • • • • DOUBLE CHANNEL BRACKET Uniform Loading 600 Lbs. (2.67 kN) Safety Factor of 2.5 Standard finishes: ZN, GRN, HDG, SS4 Wt./C 490 Lbs. (222.2 kg) 2” (20.6) (50.8) 3/8” 61/4” (158.7) • Safety Factor of 2.5 • Standard finishes: ZN, GRN, HDG 13/16” (30.1) 13/16” (9.5) A 13/16” (30.1) 6” 45/8” (117.5) 71/4” (152.4) (184.1) 31/8” (79.4) 201/2” Part No. B297-12 B297-18 B297-24 B297-30 B297-36 B297-42 (520.7) 73/4” (196.8) 21/2” (63.
PAGE 104
Brackets B196 B198 13/16” CHANNEL CLEVIS BRACKET CHANNEL CLEVIS BRACKET (20.6) • Safety Factor of 2.5 • Standard finishes: ZN, GRN • Safety Factor of 2.5 53/8” • Standard finishes: (136.5) ZN, GRN 13/16” (20.6) 31/2” (88.9) A 35/8” A (92.1) B22 Part No. A Uniform Load B196-18 B196-24 18” 24” (A) (457.2) (609.6) B22 Wt./C Lbs. kN Lbs. kg 600 450 (2.67) 430 510 (195.0) (2.00) (231.3) Part No. A Uniform Load B198-6 B198-12 6” 12” (A) (152.4) (304.
PAGE 105
Brackets B370 B195 BRACKET FOR B22A & B11 • Safety Factor of 2.5 13/32” • 13000 In.-Lbs (1469 N•m) applies (27.8) to fitting only, not to strength of strut arm • Refer to page 217 for strut loading data • Standard finishes: ZN, GRN • Wt./C 266 Lbs. (120.6 kg) 8” B22 BRACKET FOR B42 • Safety Factor of 2.5 • 2500 In.-Lbs (282 N•m) applies to fitting only, not to strength of strut arm • Refer to page 217 for strut loading data • Standard finishes: ZN, GRN • Wt./C 174 Lbs. (78.9 kg) (100.0) (54.
PAGE 106
Brackets B816 B852S-W-D • Standard finishes: ZN, HDG • Specify W = 8, 12, 16 • Specify D = 6, 8, 10, 12, 16, 18, 24 • 13/16” (20.6mm) x 1” (25.4mm) banding slots for steel band • Standard finishes: ZN, HDG 2” 13/32” (10.3) Dia. (50.8) 61/2” (165.1) 13/16” (20.6) Dia. 23/8” (60.3) 21/8” (54.0) 9/16” (355.6) (355.6) 725/32” (14.3) 14” 14” (197.6) 9/16” x 29/16” Slot (14.3) (65.1) W D 11/16” x 1” Slot (17.4) (25.4) 13/16” x 1” Slot (20.6) (25.
PAGE 107
Brackets B811-W B812-* • Can be attached directly to B809 & B812 • Specify W = 8, 12, 16 • Standard finishes: ZN, HDG • Specify D = 6, 8, 10, 12, 16, 18, 24 • 13/16” (20.6mm) x 1” (25.4mm) banding slots for steel band • Standard finishes: ZN, HDG 121/32” (42.1) 13/32” (10.3) Dia. 13/16” (20.6) Dia. W 27/16” 725/32” (61.9) (197.6) 13/16” x 1” Slot (20.6) (25.4) D 13/16” (20.6) B809B-* • Specify D = 6, 8, 10, 12, 16, 18, 24 • 13/16” (20.6mm) x 1” (25.
PAGE 108
Miscellaneous Fittings B214 R&L B514 R&L REEL RACK SUPPORT FOR 11/4” (32) PIPE REEL RACK SUPPORT FOR 2” (50) PIPE • Standard finishes: ZN, GRN • Wt./C 246 Lbs. (111.6 kg) • Standard finishes: ZN, GRN • Wt./C 200 Lbs. (90.7 kg) 3” 3” (76.2) (76.2) 35/8” (92.1) 35/8” (92.1) 53/8” (136.5) 53/8” (136.5) 53/8” (136.5) A B214R Right Hand B214L Left Hand 53/8” (136.
PAGE 109
Miscellaneous Fittings B664 B438 DOUBLE PIPE SUPPORT FOR 11/4” (32) PIPE PIPE SUPPORT BRACKET • Standard finishes: ZN, GRN • Wt./C 154 Lbs. (69.8 kg) 13/4” (44.4) • Standard finishes: ZN, GRN • Material: ASTM A36 • Wt./C 132 Lbs. (59.9 kg) 35/16” (84.1) 41/4” (107.9) Holes 9/16”(14.3) 31/2” (88.9) 13/4” (44.4) 325/32” 213/16” (101.6) (96.0) (71.4) B439 B411 SERIES PIPE SUPPORT BRACKET LADDER RUNGS • Standard finishes: ZN, GRN • Wt./C 88 Lbs. (39.
PAGE 110
Miscellaneous Fittings B349 B350 TROLLEY BEAM SUPPORT TROLLEY BEAM JOINT SUPPORT • Design Load 1200 Lbs. (5.34 kN) • Safety Factor of 2.5 • Use 3/8” x 3” bolts in side hole to clamp strut together (not included) • Standard finishes: ZN, GRN 9/16”(14.3) Dia. • Wt./C 107 Lbs. (48.5 kg) • Design Load 1200 Lbs. (5.34 kN) • Use 3/8” x 3” bolts in side hole to clamp strut 21/8” (54.0) together (not included) • Standard finishes: ZN, GRN 9/16”(14.3) Dia. • Wt./C 233 Lbs. (105.7 kg) 21/8” (54.
PAGE 111
Miscellaneous Fittings B376 35/16” FOUR BEARING TROLLEY ASSEMBLY B377 15/16” (84.1) TWO BEARING TROLLEY ASSEMBLY (33.3) • Safety Factor of 2.5 • Stainless steel ball bearings • Not for continuous cycling Bearing O.D. applications 13/16” • Standard finishes: ZN • Wt./C 48 Lbs. (21.8 kg) (20.6) • Safety Factor of 2.5 • Stainless steel ball bearings • Not for continuous cycling applications • Standard finishes: ZN 33/8” • Wt./C 110 Lbs. (49.9 kg) (85.7) 11/8” (28.6) 15/16” 31/8” 300 450 600 (1.
PAGE 112
Miscellaneous Fittings B203-B206 & B220-B223 B283-B286 CHANNEL END CAPS TYPE X A • Material: ASTM A1011 CS Type B • Standard finishes: ZN, GRN, HDG, SS4, AL Part No. B203 B204 B205 B206 B220 B221 B222 B223 CHANNEL END CAPS • Material: ASTM A1011 33,000 PSI min. yield • Standard finishes: ZN, GRN A Wt./C Use With A (A) Lbs. kg B42 B54 B22 B32 B52 B12 B11 B24 1.015 .827 1.640 1.390 .827 2.452 3.265 1.640 (25.8) (21.0) (41.6) (35.3) (21.0) (62.3) (82.9) (41.6) 6 5 10 8 4 15 20 10 (2.7) (2.
PAGE 113
Miscellaneous Fittings B823 B825 PROFILE END CAPS PLASTIC END CAPS • Material: PVC • Available in colors: White (W), Yellow (Y), Black (BLK), Gray (GRY), Green (GRN) • Material: Polyurethane • Available in colors: Gray (GRY), Green (GRN) Approx. 3/4” deep (19.0) Part No. Fits Channel Sizes B823-22A B22A, B24A, B26A B823-22 B22, B24, B26 B823-42 B42 B823-52 B52, B54, B56 Wt./C Lbs. kg 6.9 4.1 3.8 3.5 (3.1) (1.8) (1.7) Part No. B825-22 B825-52 (1.6) Fits Channel Sizes B22 & B24 B52 & B54 Wt.
PAGE 114
Beam Clamps Beam Clamps Cooper B-Line’s beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding . A complete selection of beam clamps, pipe clamps, rollers, supports and accessories are designed for use with Cooper B-Line channels and offer many installation advantages. Materials & Finishes (Unless otherwise noted) Pipe clamps, pipe hangers, beam clamps, brackets, and rollers are made from low carbon steel strips, plates or rod unless noted.
PAGE 115
Beam Clamps B351L D STEEL C-CLAMP WITH LOCKNUT Max. Flange Thickness • Safety Factor of 5 • Setscrew and locknut included • When Retaining Strap is required, order B3362, B3363 or B3365 separately • Standard finishes: ZN, SS4, PLN * 3/8 Thru 3/4 Sizes Only E Rod Size C Part Number With Locknut B351L-3/8 * B351L-1/2 * B351L-5/8 * B351L-3/4 * B351L-7/8 Rod Size A 3/8”-16 1/2”-13 5/8”11 3/4”-10 7/8”-9 B 23/8” 23/8” 23/8” 23/8” 3” C 23/8” 23/8” 21/4” 31/4” 31/4” (60.3) (60.3) (60.3) (60.3) (76.
PAGE 116
Beam Clamps B3033 C REVERSIBLE WIDE JAW WEDGE C-CLAMP (MALLEABLE IRON) •Safety Factor of 5 •Setscrew and locknut included •Material: Malleable iron •Standard finishes: ZN, PLN Beam Clamps Throat Openings 11/4” (31.7) For 3/8 & 1/2 Sizes D B 15/16” (33.3) For 5/8 & 3/4 Sizes Rod Size Throat Opening Part No. Rod Size A B3033-3/8 B3033-1/2 B3033-5/8 B3033-3/4 3/8”-16 1/2”-13 5/8”-11 3/4”-10 Design Load B 21/4” 25/16” 25/8” 211/16” C (57.1) 2” (58.7) 23/16” (66.7) 21/2” (68.3) 21/2” (50.8) (55.
PAGE 117
Beam Clamps Fig. 69 (Formally B-Line B3367) RETAINING STRAP • • • • Specify ‘L’ lengths required Minimum recommended return on strap is 1” (25.4) Material: Pre-Galvanized Steel Standard finishes: GALV 69-3/8-L 69-1/2-L 69-5/8-L 69-3/4-L For Use With B3033-3/8 B3034-3/8 & 65XT-3/8 9/16” (30.1) B3033-1/2 & B3034-1/2 11/16” (50.8) B3033-5/8 13/16” (63.5) B3033-3/4 7/16” (30.1) D Wt./C** Lbs. kg 23.9 (10.8) Beam Clamps Part No. Hole Dia. D 11/4” (31.7) L 23.6 (10.7) 23.2 (10.5) 22.7 (10.
PAGE 118
Beam Clamps B444 Beam Clamps SERIES ROD SUPPORT • Safety Factor of 5 • Max. Flange Thickness 3/4” (19.0) for 1/4 & 5/16 sizes 1” (25.4) for 3/8 & 1/2 sizes • Setscrew included • Material: Malleable iron • Standard finish: ZN Available in HDG with CZ Hardware A (Bottom & Back) D Design Load Part No. Thread Size A Set Screw B444-1/4 1/4”-20 1/4”-20 13/8” (34.9) B444-5/16 B444-3/8 B444-1/2 5/16”-18 1/4”-20 (34.9) 3/8”-16 1/2”-13 1/2”-13 5/8”-11 13/8” 17/8” 23/8” C D Lbs. kN Lbs.
PAGE 119
Beam Clamps B303 THRU B309 BEAM CLAMPS • • • • • Safety Factor of 5 Max. Flange Thickness 1/16” (1.6) thru 7/8” (22.2) Setscrew included When Retaining Strap is required, order B312 separately Recommended Setscrew Torque: 3/8”-16 150 in-lbs. (16.9 N•m) 1/2”-13 350 in-lbs. (39.5 N•m) • Standard finishes: ZN, HDG Rod Size A 1/4”-20 5/16”-18 3/8”-16 3/8”-16 1/2”-13 1/2”-13 5/8”-11 11/8” (28.6) Max.
PAGE 120
Beam Clamps Beam Clamps B751 B752 BEAM CLAMP BEAM CLAMP SWIVEL • • • • • • • • • • • • • Safety Factor of 5 3/4” (19.0) Max. Flange Thickness Setscrew and Locknut included Maximum ATR Size 1/2” Use B753 Swivel Nut (not included) Material: 12 Gauge (2.6) Standard finish: ZN, HDG Wt./C 42 Lbs. (19.0 kg) Design Load 500 Lbs. (2.22 kN) Safety Factor of 5 Material: 12 Gauge (2.6) Use B753 Swivel Nut (not included) Includes: B751 Clamp (Not 1 pc. B752 Swivel Body Included) 5 3 1 pc.
PAGE 121
Beam Clamps B755 3/8 • • • • • B756-3/8 BEAM CLAMP SWING CONNECTOR Safety Factor of 5 5/8” (15.9) Max. Flange Thickness For 3/8”-16 Hanger Rod only. Design Load 150 Lbs. (0.66 kN) Safety Factor of 5 Material: 12 Gauge (2.6) Includes: 1 pc. B756-3/8 Swing Connector Body 1 pc. 5/16”-18 x 11/4” SHHMS 1 pc. 5/16”-18 Square Nut • Use B753 Swivel Nut (not included) • Standard finish: ZN • Wt./C 15 Lbs. (6.8 kg) Machine Nuts 1” (25.4) 21/2” (60.3) 3/8” (9.
PAGE 122
Beam Clamps B750 SERIES Beam Clamps BEAM CLAMP 1/2”-13 Rod & Hex Nut Sold Separately • Safety Factor of 5 • Design Load 500 Lbs. (2.22 kN) • Recommended Torque: J-Hook Nut 125 in-lbs. (14.1 N•m) • Maximum Flange Thickness 5/8” (15.9) • Standard finish: ZN 7 Ga (4.6) Wt./C Part No. For Flange Width Lbs. 15/8” kg 127/32” (46.8) (41.3) 3”-6” 5”-9” 8”-12” 11”-15” B750-J4 B750-J6 B750-J9 B750-J12 109 124 135 147 (76.2-152.4) (127.0-228.6) (203.2-304.8) (279.4-381.0) (49.4) (56.2) (61.2) (66.
PAGE 123
Beam Clamps B441-22A B314 BEAM CLAMP BEAM CLAMP BEAM CLAMP • Design Load 1200 Lbs. (5.34 kN) when used in pairs • Safety Factor of 5 • 3/4” (19.0) Max. Flange Thickness • For use with 13/16” (20.6) to 15/8” (41.3) high channel • Recommended Torque: 150 in-lbs. (16.9 N•m) • Sold in pieces • Other flange thickness variations are available, contact B-Line Engineering for sizes • Standard finishes: ZN, HDG, SS4 • Wt./C 87 Lbs. (39.4 kg) • Design Load 1200 Lbs. (5.
PAGE 124
Beam Clamps Beam Clamps B211 B213 ZEE BEAM CLAMP I-BEAM CLAMP • Design Load 600 Lbs. (2.67 kN) when used in pairs • Safety Factor of 5 • 1” (25.4) Max. Flange Thickness • 1/2”-13 Setscrew included • Sold in pieces • Order 1/2”-13 HHCS and Channel Nut separately • Standard finishes: ZN, HDG • Wt./C 66 Lbs. (29.9 kg) • Design Load 900 Lbs. (4.00 kN) when used in pairs • Safety Factor of 5 • 7/8” (22.2) Max.
PAGE 125
Beam Clamps B405 B405A BEAM CLAMP SUSPENSION MEMBER • Design Load 1100 Lbs. (4.89 kN) when used in pairs • Safety Factor of 5 • 21/2” (63.5) Max. Flange Thickness without channel • 1/2”-13 x 11/2” Setscrew included • Sold in pieces • Standard finish: ZN • Wt./C 92 Lbs. (41.7 kg) • Standard finishes: ZN, GRN • Wt./C 75 Lbs. (34.0 kg) SUSPENSION MEMBER WITH BEAM CLAMP • 7/8” (22.2) Max. Flange Thickness • Includes: 1 pc. B405 Suspension Member 1 pc. B213 I-Beam Clamp 1 pc. 1/2”-13 x 21/2” HHCS 1 pc.
PAGE 126
Beam Clamps B760-22 SERIES B760-22A SERIES Beam Clamps BEAM CLAMP BEAM CLAMP • 1” (25.4) Max. Flange Thickness • For use with 13/16” (20.6) to 15/8” (41.3) high channel • Recommended Torques: U-Bolt Nuts 150 in-lbs. (16.9 N•m) J-Hook Nut 60 in-lbs. (6.8 N•m) 33/8” (85.7) • Includes: 1 pc. B760 Plate 1 pc. B701 Type J-Hook only 1 pc. B500-33/8” U-Bolt only 3 pcs. 3/8”-16 Hex Nuts • Standard finish: ZN • 1” (25.4) Max. Flange Thickness • For use with 15/8” (41.3) to 31/4” (82.
PAGE 127
Beam Clamps B614 COLUMN SUPPORT FOR B22 B613A COLUMN SUPPORT FOR B22 COLUMN SUPPORT FOR B52 • Design Load 800 Lbs. (3.56 kN) Slip with Safety Factor of 3 • Use with B22 and B24 Channel • Setscrews to be torqued to 19 ft./Lbs • Sold in pairs • Standard finishes: ZN, GRN, HDG • Wt./C 100 Lbs. (45.3 kg) • Design Load 800 Lbs. (3.56 kN) Slip with Safety Factor of 3 • Use with B52 and B54 Channel • Setscrews to be torqued to 19 ft./Lbs • Sold in pairs • Standard finishes: ZN, GRN, HDG • Wt./C 100 Lbs. (45.
PAGE 128
Pipe/Conduit Clamps & Hangers Cooper B-Line’s beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. A complete selection of beam clamps, pipe clamps, rollers, supports and accessories are designed for use with Cooper B-Line channels and offer many installation advantages.
PAGE 129
Pipe Clamps B2207 THRU B2213 MULTI-GRIP PIPE CLAMPS FOR THINWALL (EMT), I.M.C., RIGID CONDUIT OR PIPE • • • • • Design Load 1 Safety Factor of 5 Add PA to suffix for pre-assembled pipe clamps Includes Combination Recess Hex Head Machine Screw and Square Nut Material: ASTM A1011 33,000 PSI min. yield Standard finish: ZN Design Load 3 Design Load 2 Nominal Size Material Thickness B2207 38 / ” (10) 16 Ga. (1.5) B2208 1/2” (15) 16 Ga. (1.5) B2209 3/4” (20) 14 Ga. (1.9) .917-1.081 (23.2-27.
PAGE 130
Pipe Clamps B2000 SERIES PIPE AND CONDUIT CLAMPS • Safety Factor of 5 • Add PA to suffix for pre-assembled pipe clamps • Includes Combination Recess Hex Head Machine Screw and Square Nut • Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50 • Standard finishes: ZN, HDG, SS4, SS6, AL Design Load 1 Note: For EMT sizes 21/2” and larger use rigid conduit sizes.
PAGE 131
Pipe Clamps B2000 SERIES Design Load 1 PVC CLAMPS • • • • Safety Factor of 5 Add PA to suffix for pre-assembled pipe clamps Includes Combination Recess Hex Head Machine Screw and Square Nut Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50 • Standard finishes: PVC CLAMP SIZING CHART FOR PVC COATED RIGID CONDUIT AND CLAMPS 1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” 5” 6” (15) (20) (25) (32) (40) (50) (65) (80) (90) (100) (125) (150) .
PAGE 132
Pipe Clamps B2000 SERIES Design Load 1 O.D. PIPE AND CONDUIT CLAMPS • • • • Safety Factor of 5 Add PA to suffix for pre-assembled pipe clamps Other sizes available upon request Includes Combination Recess Hex Head Machine Screw and Square Nut. • Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50 • Standard finishes: ZN, HDG, SS4 O.D. O.D. Design Load 2 Design Load 3 O.D. CLAMPS Pipe/Conduit Clamps & Hangers Part No. O.D.
PAGE 133
Pipe Clamps B2000 SERIES O.D. PIPE AND CONDUIT CLAMPS • Safety Factor of 5 • Add PA to suffix for pre-assembled pipe clamps • Other sizes available upon request • Includes Combination Recess Hex Head Machine Screw and Square Nut. • Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50 Design Load 1 •Standard finishes: ZN, HDG, SS4 O.D. O.D. Design Load 2 Design Load 3 Part No.
PAGE 134
Pipe Clamps B1508 THRU B1564S Design Load CONDUIT/STRUT CLAMPS • Safety Factor of 3 • Clamps without saddles are not recommended for flexible conduit or cable • All Sizes Include: 1/4”-20 Slotted Hex Head Machine Screw • Standard finish: ZN Setscrew Pipe/Conduit Clamps & Hangers Thickness B1508S THRU B1524S B1508 THRU B1520 B1532S THRU B1564S Part No.
PAGE 135
Pipe Clamps B2601 THRU B2610 TWIST EAR® PIPE CLAMP • One piece break apart, screw retainer, thread impressions • Tighter alignment, no need to leave additional space between clamps in order to access nut and bolt • Easier access bolt can be tightened directly from front • Available in 1/2”, 3/4”, 1” rigid and EMT Conduit • Recommended Torque 30 in. - lbs.
PAGE 136
VibraClamp™ Pipe Clamps Design Load 1 BVT SERIES VIBRACLAMPS-COPPER & O.D.
PAGE 137
VibraClamp™ Pipe Clamps BVP SERIES VIBRACLAMPS-IRON PIPE & RIGID CONDUIT • Safety Factor of 3 • Accesses pipe sizes 1/4” (6) to 6” (150) • Allows easy one tool installation • Endures both high (+300°F) and low (-40°F) temperatures • Dampens vibration and noise • Eliminates galvanic metal to metal contact • Resists most industrial oils and solvents • Reduces thermal loss and gain • Secures pipe firmly to channel (strut) • Dielectric strength of 400 volts/mil • Includes cushion, clamp, screw and nut • Standar
PAGE 138
Armafix™ Clamps & Accessories IPH SERIES Pipe/Conduit Clamps & Hangers INSERTS - INSERTS WITH CLAMPS • Engineered load-bearing inserts prevents insulation compression 1/2” Wall Insulation Thickness • Innovative insulated pipe support • Desirable “Foam-to-Foam” Bond Assembly Insert Only Pipe/Copper/OD Hanger • Slip Data: 45 lbs. (0.20 kN) max Part No. Size Size* Part No. • Recommended Clamp Torque: 12-15 in-lbs. (1.3-1.7 Nm) 3 /8” O.D. 11/4” IPH03812 IPH03812WO • Service Temperature Range 1/2” O.D.
PAGE 139
Vibra Cushion™ Accessories B1999 FEATURES VIBRA CUSHION™ Vibra Cushion™ is designed for use with refrigeration lines, HVAC, copper tubing, glass pipe and hydraulic lines. It provides an energy-absorption barrier between the lines and the mounting material and remains flexible thru its entire service range of -75°F (-60°C) to +375°F (+199°C). • • • • • Packaged 20 Ft. (6.
PAGE 140
Pipe Clamps Design Load 1 B2400 SERIES STANDARD PIPE STRAP Pipe Size • • • • • Safety Factor of 5 B2400-3/4 thru B2400-8 are UL listed Order hardware separately Other sizes available upon request Material: Sizes - 1/2” - 11/2”, ASTM A1011 33,000 PSI min. yield; 2” - 12”, ASTM A1018 33,000 PSI min. yield; Design Load 14”-Larger, ASTM A36 3 • Standard finish: ZN • Ductile Iron Sizes Available • Meets requirements of MSS SP-58 & SP-69 Type 26 Pipe/Conduit Clamps & Hangers Part No.
PAGE 141
Pipe Clamps B437 SERIES TWO PIECE PIPE STRAP • Clamp halves can turn allowing pipe to be fastened to channel at any direction • Order hardware separately • Standard finish: ZN Wt./C Part No. 1/2” (15) 3/4” (20) 1” (25) 11/4” (32) 11/2” 2” 21/2” 3” 31/2” 4” 5” 6” 8” (40) A T 5 /16” /16” 5 /16” 5 /16” 5 /16” 7 /16” 7 /16” 7 /16” 7 /16” 9 /16” 9 /16” 9 /16” 9 /16” (7.9) 5 (50) (65) (80) (90) (100) (125) (150) (200) (7.9) (7.9) (7.9) (7.9) 10 10 10 10 10 (11.1) (11.1) (11.1) (11.1) (11.
PAGE 142
Pipe Clamps B670 SERIES B671 SERIES PARALLEL PIPE CLAMP EDGE PIPE CLAMP • Designed to support pipe or rigid conduit parallel to the edge of a beam or angle iron • Hardware included • Material: Malleable Iron • Standard finish: HDG • Designed to support pipe or rigid conduit perpendicular to the edge of a beam or angle iron • Hardware included • Material: Malleable Iron • Standard finish: HDG Pipe/Conduit Clamps & Hangers Part Number Pipe or Conduit Wt./C Size Lbs.
PAGE 143
Pipe Clamps B2301 SERIES ONE HOLE EMT STRAP Hole Dia. • Standard finish: ZN W T Part No. T 1/2” (15) 3/4” (20) 1” 1 1 /4” 11/2” 2” (25) .050 .050 .050 .065 .090 .090 (32) (40) (50) Hole Dia. W Wt./C (1.3) 3/4” (19.0) 9/32” (7.1) (1.3) 7/8” (22.2) 9/32” (7.1) (1.3) 1” 1 1 /4” 1” 11/4” (25.4) 9/32” (7.1) (31.7) 9/32” (7.1) (25.4) 11/32” (8.7) (31.7) 13/32” (10.3) (1.6) (2.3) (2.3) Lbs. kg 2.4 4.2 8.3 11.0 14.8 21.6 (1.1) (1.9) (3.7) (5.
PAGE 144
Pipe Clamps Design Load BL1400 SERIES CONDUIT HANGER • • • • Safety Factor of 3 Unless noted all sizes fit both rigid (R) and thinwall (EMT) conduit Hardware included Standard finishes: ZN, SS4 W Conduit Size A T Hole Size B Part No Conduit Size Design Load A B Pipe/Conduit Clamps & Hangers 1/2” 29/32” (23.0) BL1400 (15) 3 31/32” (24.6) BL1410 /4” (20) BL1420 1” (25) 11/4” (31.7) 1 BL1425 1 /4” EMT (32) 11/4” (31.7) 1 1 BL1430 1 /4” R,1 /2” EMT (32) 113/32” (35.7) BL1440 11/2” R (40) 15/8” (41.
PAGE 145
Pipe Hangers B3690 SERIES ADJUSTABLE J HANGER • Safety Factor of 5 • Material: 12 Ga. (2.6) ASTM A1011 33,000 PSI min. yield 11 Ga. (3.0) ASTM A1011 HSLA Gr. 50 Class 1 7 Ga. (4.5) ASTM A1011 33,000 PSI min. yield and 1/4” (6.3) ASTM A1018 33,000 PSI min. yield • Standard finish: ZN A DIA. ‘D’ C Rod Take-Out B ‘E’ Diameter. Is For Wall Mounting TxW Felt Line B3690F-SIZE Design Load Design Load Part No.
PAGE 146
Pipe Hangers B386 SERIES A Dia. SUSPENSION ROD PIPE STRAP T • Safety Factor of 3 • Includes Hex Head Cap Screws and Hex Nuts • Standard finishes: ZN, GRN C W B Design Load Wt./C Pipe/Conduit Clamps & Hangers Design Load Part No. Pipe Size B386-3/4 3/4” (20) 7/16” 1” 11/4” 11/2” 2” 1 2 /2” 3” 31/2” 4” 5” 6” 8” (25) 7/16” (11.1) 35/16” (11.1) 33/4” (32) 7/16” (11.1) (40) 7/16” (11.1) (50) 7/16” (11.1) (65) 9/16” (14.3) 9/16” (14.
PAGE 147
Pipe Brackets B591 SERIES PIPE BRACKET SADDLE AND CLAMP • Safety Factor of 3 • Inside brace not required on B591-2 and B591-21/2 • Includes: 1 pc. Saddle bottom 1 pc. Saddle top (clamp) 2 pcs. Hex Head Cap Screws 2 pcs. Hex Nuts • Standard finish: ZN 113/16” (30.1) Pipe Size 1/4” (6.3) B D W A Pipe/Conduit Clamps & Hangers C Design Load Wt./C Design Load Part No.
PAGE 148
Pipe Block B356 PIPE BLOCK-2” (50) TO 8” (200) PIPE Pipe/Conduit Clamps & Hangers • Required hardware not included: 1 pc. 3/8”-16 x 1” Hex Head Cap Screw 1 pc. 3/8”-16 Channel Nut • Material: 1/4” (6.3) thick 15/8” (41.3) wide ASTM A1018 33,000 PSI min. yield • Standard finish: ZN • Wt./C 42 Lbs. (19.0 kg) Per Pair Hole For 3/8”-16 HHCS 1” (25.4) 31/16” (77.8) Reference page 126 for general fitting and standard finish specifications.
PAGE 149
Pipe Rollers B218 PIPE ROLLERS-1/2” (15) TO 8” (200) PIPE • Design Load 500 Lbs. (2.22 kN) • Safety Factor of 5 • When used with B3160 thru B3165 Saddles (See Pipe Hanger Catalog) • Malleable Iron Rollers • Sold in pairs • Required hardware not included: 2 pcs. 1/2”-13 x 11/4” Hex Head Cap Screws 2 pcs. 1/2”-13 Channel Nuts • Standard finish: ZN • Wt./C 256 Lbs. (116.1 kg) Per Pair B 25/8” (66.7) A REFERENCE CHART - A DIMENSION Insulation Thickness in.
PAGE 150
Pipe Rollers B219 PIPE ROLLER SERIES - 3/4” (20) TO 12” (300) PIPE • • • • • • • • • Design Load 750 Lbs. (3.33 kN) Safety Factor of 5 Requires field assembly When used with B3160 thru B3165 Saddles (See Pipe Hanger Catalog) Malleable Iron Rollers Sold in pairs Required hardware not included: 2 pcs. 1/2”-13 x 11/4” Hex Head Cap Screws 2 pcs. 1/2”-13 Channel Nuts Reference sizing chart on page 135 Standard finish: ZN B Pipe/Conduit Clamps & Hangers 25/8” (66.7) A 23/8” (60.
PAGE 151
Pipe Rollers B219 SIZING CHART 0” (0.0) 1” (25.4) 1/2” B219 B219 B219 B219 B219 B219 B219 B219 B219-1 B219-1 B219-1 B219-2 B219-3 B219-4 B219-5 – B219 B219 B219 B219 B219-1 B219-1 B219-1 B219-2 B219-2 B219-2 B219-3 B219-4 B219-5 – 3/4” 1” 11/4” 11/2” 2” 1 2 /2” 3” 31/2” 4” 5” 6” 8” 10” 12” (15) (20) (25) (32) (40) (50) (65) (80) (90) (100) (125) (150) (200) (250) (300) Insulation Thickness in. (mm) 11/2” (38.1) 2” (50.8) 21/2” (63.
PAGE 152
Pipe Rollers B379 PIPE ROLLERS-6” (150) TO 18” (450) PIPE • • • • • • • • • Design Load 1500 Lbs. (6.67 kN) Safety Factor of 5 Requires field assembly When used with B3160 thru B3165 Saddles (See Pipe Hanger Catalog) Malleable Iron Rollers Sold in pairs Required hardware not included: 2 pcs. 1/2”-13 x 11/4” Hex Head Cap Screws 2 pcs. 1/2”-13 Channel Nuts Standard finish: ZN Wt./C 889 Lbs. (403.2 kg) B Pipe/Conduit Clamps & Hangers 4” (101.6) A REFERENCE CHART - A DIMENSION Insulation Thickness in.
PAGE 153
Pipe Rollers B479 PIPE ROLLERS-16” (400) TO 30” (750) PIPE • • • • • • • • • Design Load 2000 Lbs. (8.89 kN) Safety Factor of 5 Requires field assembly When used with B3160 thru B3165 Saddles (See Pipe Hanger Catalog) Malleable Iron Rollers Sold in pieces Required hardware not included: 4 pcs. 1/2”-13 x 11/4” Hex Head Cap Screws 4 pcs. 1/2”-13 Channel Nuts Standard finish: ZN Wt./C 889 Lbs. (403.2 kg) Pipe/Conduit Clamps & Hangers B 4” (101.6) A 213/16” (71.
PAGE 154
Dura-Blok™ Rooftop Supports Cooper B-Line’s new line of Dura-Blok™ products gives you a versatile and long-term solution for all your roof top support needs. Designed with flexibility in mind, Dura-Blok is ideal for roof top support applications such as pipe, HVAC, duct, conduit, cable tray, and roof walkways. Manufactured to provide years of service in harsh, roof top environments, Dura-Blok is made from 100% recycled rubber, require no supplemental rubber pads, and will not float or blow away.
PAGE 155
Dura-Blok™ Rooftop Supports SUPPORT BASES ONLY • • • • Base only - see chart for height, width and length. 100% recycled rubber, UV resistant. Load Rating - Ultimate Uniform Load (See Chart Below)* Dura-Blok™ channel support is designed as an economical support for piping systems, cable tray, HVAC equipment and many other applications. The Dura-Blok is UV resistant and suitable for any type of roofing material or other flat surfaces. Material effectively accepts screw fasteners for securing accessories.
PAGE 156
Dura-Blok™ Rooftop Supports DB10 SERIES SUPPORT BASES WITH B22 CHANNEL • Two (2) bases bridged with 12 ga. (2.6mm) galvanized channel 15/8” high (41.3mm) - see chart for height, width and length. • 100% recycled rubber, UV resistant. • Load Rating: 1000 lbs. (4.45kN) (Uniform Load)* • Dura-Blok™ DB10-Series channel support is designed for superior support of piping systems, cable tray, HVAC equipment, walkway systems and many other applications.
PAGE 157
Dura-Blok™ Rooftop Supports DBE SERIES SUPPORT BASE WITH ROD RISERS & CHANNEL • Base with (2) 1/2” electro zinc all threaded rod risers - Top channel is 1” (25.4mm) tall. See chart for adjustable height x wide x length. • 100% recycled rubber, UV resistant. • Load Rating” 200 lbs. (0.
PAGE 158
Dura-Blok™ Rooftop Supports DB__DS SERIES SUPPORT BASES WITH B22SH VERTICAL & HORIZONTAL CHANNEL MEMBERS • Product is shipped unassembled. • Two (2) DB20 bases with 14 ga. (1.9mm) galvanized channel 1” high (25.4mm) Bases are 5” (127.0mm) high x 6” (152.4mm) wide x 20.2” (513.1mm) long. Vertical & Horizontal Riser Channels (SH Style) - 15/8” (41.3mm) x 15/8” (41.3mm) x 12 ga. (2.6mm) Fittings & Hardware - Electro-Plated Steel • 100% recycled rubber, UV resistant. • Ultimate Load Rating: 1000 lbs. (4.
PAGE 159
Dura-Blok™ Rooftop Supports DB__DS SERIES cont. A Min. to Max. Part No. In. B (mm) In. (mm) (343) DB2318DS 10.56” to 20.75” (268 to 527) 131/2” DB2918DS 10.56” to 26.75” (268 to 679) 131/2” (343) (343) DB4118DS 10.56” to 38.75” (268 to 984) 131/2” DB5318DS 10.56” to 50.75” (268 to 1289) 131/2” (343) DB2324DS 10.56” to 20.75” (268 to 527) 191/2” (495) DB2924DS 10.56” to 26.75” (268 to 679) 191/2” (495) (495) DB4124DS 10.56” to 38.75” (268 to 984) 191/2” DB5324DS 10.
PAGE 160
Dura-Blok™ Rooftop Supports DBR SERIES SUPPORT BASES WITH B42 CHANNEL & PIPE ROLLER • Base with 14 ga. (1.9mm) galvanized channel 1” high (25.4mm) tall see chart for height, width and length. • 100% recycled rubber, UV resistant. • Load Rating: (See Chart Below)* • Dura-Blok™ DBR-Series support is designed to support pipe where longitudinal movement is expected. The Dura-Blok is UV resistant and approved for installation on any type of roofing material or other flat surfaces.
PAGE 161
Dura-Blok™ Rooftop Supports ROOFTOP APPLICATIONS Dura-Blok™ Supports 159
PAGE 162
Dura-Blok™ Rooftop Supports ROOFTOP SUPPORTS IN WALKWAY APPLICATIONS • Safety Grating is available with slip resistant Grate-Lock™, helping provide a safe walkway for foot traffic on the roof. Dura-Blok™ Supports • Easy to install, elevated design, creates an identifiable path for foot traffic helping prevent wear and tear to the roof surface. • The cross-over design offers safe passage over existing cabling, piping, cable tray or any other interference on the rooftop.
PAGE 163
Dura-Blok™ Rooftop Supports Dura-Blok™ Supports 161
PAGE 164
Electrical Accessories A complete system of top quality, time saving products, designed for surface metal raceways, lighting and cable supports. Innovative designs offer many installation advantages. Cooper B-Line’s surface raceways are U.L. listed and meet the requirements of the National Electrical Code, Article 352. Surface Raceways Cooper B-Line’s channel provides structural support in addition to a raceway system. For U.L. wire fill see chart on page 230-231.
PAGE 165
Electrical Accessories (9) (7) (11) (8) (1) (5) (4) (13) (1) (1) or (1A) (Not Shown) (6) (10) (13) (3) or (3A) (Not Shown) (2) 2 3 3A 4 5 Channel Hanger Fixture Hanger End Cap Connection End Cap Internal Straight Splice Internal Tee Splice (82.5) B616-22A* B241S* B616S-22A* B205 or B285 B766-22 (2) B768-22 (2) B11 B12 B22 B24 B26 31/4” (82.5) B616-22A* 27/16” (61.9) B616-22A* B241S* B241S* B768-11 B768-12 (41.3) B616* B216S* B392-22** B766-22 B768-22 15/8” (41.
PAGE 166
Fluorescent Fixture Hangers B616-9/16 B616-7/8 CHANNEL HANGER CHANNEL HANGER • Design Load 250 Lbs. (1.11 kN) • Safety Factor of 3 • Maximum design load 50 Lbs. (.22 kN) whenused as a fixture support • Includes: 2 pcs. 3/8” Flat Washers for use with 3/8” ATR • Material: 16 Gauge (1.5) 9/16” (14.3) Dia. For • Standard finish: ZN 1/2” ATR • Wt./C 25 Lbs. (11.3 kg) • Design Load 250 Lbs. (1.11 kN) • Safety Factor of 3 • Maximum design load 50 Lbs. (.
PAGE 167
Fluorescent Fixture Hangers B616S-22A-9/16 B616S-22A-7/8 FLUORESCENT FIXTURE HANGER WITH STUD FLUORESCENT FIXTURE HANGER WITH STUD • Design Load 150 Lbs. (.67 kN) • Safety Factor of 3 • Maximum design load 50 Lbs. (.22 kN) when used as a fixture support • Includes: 2 pcs. 3/8” Flat Washers for use with 3/8” ATR • Allows more than 1/2” (12.7) space between channel and fixture 11/2” • Material: 14 Gauge (1.9) (38.1) • Standard finish: ZN • Wt./C 49 Lbs. (22.2 kg) 1 • Design Load 150 Lbs. (.
PAGE 168
Fluorescent Fixture Hangers B390S B390BX 360° SWIVEL CHANNEL CONNECTOR 360° SWIVEL BOX CONNECTOR • Design Load 250 Lbs. (1.11 kN) • Safety Factor of 3 • Maximum design load 50 Lbs. (.22 kN) when used as a fixture support • Swings 15° in 360° plane • Includes: 2 pcs. SN224-3/4”WO Stud Nut 2 pcs. 1/4”-20 Square Nut 1 pc. 3/4” (20) to 1/2” (15) Conduit Reducer • Standard finish: ZN • Wt./C 71 Lbs. (32.2 kg) • Design Load 250 Lbs. (1.
PAGE 169
Electrical Accessories B217-20 B217P B217-24 SNAP CLOSURE STRIP FOR ALL 15/8” (41.3) WIDE CHANNELS PLASTIC SNAP CLOSURE STRIP FOR ALL 15/8” (41.3) WIDE CHANNELS SNAP CLOSURE STRIP FOR ALL 15/8” (41.3) WIDE CHANNELS • Refer to Raceway Fill Chart Pg. 214-215 • Material: 20 Gauge (.9) • Standard finishes: GRN, GALV, YZN • Standard length: 120” (3.05m) • Wt./CFT 36 Lbs. (16.3 kg) • Refer to Raceway Fill Chart Pg. 214-215 • Standard finishes: Green (GRN) or Gray (GRY) Plastic • Standard length: 120” (3.
PAGE 170
Electrical Accessories B447 B447A CONDUIT CONNECTION PLATE FOR 1/2” (15) CONDUIT CONDUIT CONNECTION PLATE FOR 3/4” (20) CONDUIT • Includes: 2 pcs. 1/4”-20 Flat Head Machine Screws 2 pcs. N224WO Channel Nuts • Material: 16 Gauge (1.5) 2 Holes • Standard finish: ZN 9/32” (7.1) Dia. • Wt./C 35 Lbs. (15.9 kg) • Includes: 2 pcs. 1/4”-20 Flat Head Machine Screws 2 pcs. N224WO Channel Nuts • Material: 16 Gauge (1.5) 2 Holes • Standard finish: ZN • Wt./C 35 Lbs. (15.9 kg) 9/32” (7.1) Dia. 7/8” (22.2) Dia.
PAGE 171
Junction Boxes B718 UNIVERSAL JUNCTION BOX • Assemble B719 Hubs into B718 square knockouts • Designed for use with B22, B24 & B26 Channel • B718 Includes: 1 pc. Junction Box only 1 pc. Cover only 2 pcs. #10-20 Round Head Machine Screws • Standard finish: ZN • Wt./C 180 Lbs. (81.6 kg) B718-1 B718-2 B718-1 B718-2 B718-2 B718-2 END THRU BOX 90° B718-3 B718-3 TEE B718-4 B718-4 CROSS SELECTION GUIDE Wt./C Part No.
PAGE 172
Strut Joiners B766 SERIES B767 SERIES STRAIGHT STRUT JOINER 90° ELBOW STRUT JOINER • Includes: 2 Cam Screws • Material: 12 Gauge (2.6) • Standard finish: ZN • Includes: 2 Cam Screws • Material: 12 Gauge (2.6) • Standard finish: ZN Note: B767-22 (Cast Aluminum Fitting) does not require miter cutting of channel as shown in drawing. 41/2” (114.3) 7/8” 25/16” (58.7) (22.2) Wt./C Part No.
PAGE 173
Strut Joiners B166 B166-46 71/4” (184.1) FOUR HOLE SPLICE CLEVIS FOUR HOLE SPLICE CLEVIS ASSEMBLY •Includes: 1 Splice Clevis 4 pcs. 1/4”-20 Flat Head Machine Screws 4 pcs. N224WO Channel Nuts •Material: 16 Gauge • Requires ground wire for use with UL listed channel raceway system • Includes: 1 Splice Clevis 1 pc. B466W tapped plate 4 pcs. 1/4”-20 Flat Head Machine Screws • Material: 16 Gauge (1.5) • Standard finishes: ZN, GRN A 111/16” (42.9) Wt./C Part No.
PAGE 174
Electrical Hardware B446B B446A SWIVEL HANGER (MALE ONLY) SWIVEL HANGER (FEMALE ONLY) • Design Load: (3/8)-610 Lbs. (2.71 kN) (1/2)-1130 Lbs. (5.02 kN) (5/8)-1810 Lbs. (8.05 kN) (3/4)-2710 Lbs. (12.05 kN) • Safety Factor of 3 • Standard finish: ZN • Design Load: (3/8)-610 Lbs. (2.71 kN) (1/2)-1130 Lbs. (5.02 kN) (5/8)-1810 Lbs. (8.05 kN) (3/4)-2710 Lbs. (12.05 kN) • Safety Factor of 3 • Standard finish: ZN A 13/4” (44.4) R R 13/4” (44.4) B Wt./C Part No. B R Lbs.
PAGE 175
Insulclamp™ Clamps B4060 THRU B4093 INSULCLAMP CABLE CLAMPS (Replaces porcelain clamps) • Assembly includes: 1 Insulclamp & 1 pr. zinc plated Pipe Straps with Everdur (Silicon Bronze) Hardware • The thermoplastic elastomer Insulclamp has a dielectric strength of 640 volts/mil • The flame retardant one piece design allows for trouble free assembly • Everdur hardware is non-ferrous and prevents magnetic induction Hole Dia. A B Part No. 3/8” (9.5) 1/2” (12.7) 5/8” (15.9) 3/4” (19.0) 7/8” (22.
PAGE 176
Porcelain & Maple Clamps B4050 & B4051 B4094 & B4095 PORCELAIN CABLE CHANNEL SADDLE PORCELAIN CABLE RACK SADDLE • Electrical porcelain has an dielectric strength of 50 volts/mil • Electrical porcelain has an dielectric strength of 50 volts/mil • Designed for use with B449 Brackets x R x A A 3” 21/4” (76.2) (57.1) Wt./C Wt./C Part No. A 3” 4” B4050 B4051 R R Lbs. Part No. kg (76.2) 13/8” (34.9) (101.6) 21/8” (54.0) 100 (45.3) 72 A B4094 B4095 (32.6) R 27/8” (73.
PAGE 177
Maple Clamps B4000 THRU B4007 MAPLE CABLE CLAMPS • Assembly Includes: 1 pr. Maple Clamps (Paraffin Impregnated) 1 pr. zinc plated Steel Pipe Straps with Everdur Hardware (Silicon Bronze) • Everdur hardware is non-ferrous and prevents magnetic induction Specify Hole Dia. Note: Maple cable clamps may be replaced with Insulclamps™ see page 173 for sizes Part No. B4000 B4001 B4002 B4003 B4004 B4005 B4006 B4007 Specify Hole Dia. 0” to 5/8” (0.0 to 15.9) 1/2” to 1” (12.7 to 25.4) 3/4” to 11/2” (19.0 to 38.
PAGE 178
Aluminum & Stainless Steel Alum. & Stainless Steel Materials Aluminum Aluminum channels, fittings and accessories offer excellent corrosion resistance and are suitable for many indoor and outdoor applications. Aluminum’s high strength to weight ratio greatly reduces overall cost of installation through ease of handling and cutting. Cooper B-Line’s channels are extruded from aluminum alloy 6063-T6. Closure strips are extruded from aluminum alloy 6063-T5.
PAGE 179
Aluminum Channel & Closure Strips B12AL B22AL • Thickness: .105 (2.6 mm) • Standard Length: 10’ (3.05 m) and 20’ (6.09 m) • Material: Aluminum • Weight: 1.06 Lbs./Ft. (1.58 kg/m) • Thickness: .105 (2.6 mm) • Standard Length: 10’ (3.05 m) and 20’ (6.09 m) • Material: Aluminum • Weight: .86 Lbs./Ft. (1.28 kg/m) • Thickness: .105 (2.6 mm) • Standard Length: 10’ (3.05 m) and 20’ (6.09 m) • Material: Aluminum • Weight: .66 Lbs./Ft. (0.98 kg/m) 31/4” (82.5) 27/16” 15/8” (41.3) (61.9) 15/8” (41.
PAGE 180
Alum. & Stainless Steel Materials Aluminum SH TYPE CHANNEL KO6 TYPE KNOCKOUT CHANNEL • Material: Aluminum • Material: Aluminum 6” 2” TYP. (50.8) (152.4) 9/16” x 11/8” Slots (14.2) (28.6) 3” (76.2) 7/8” (22.2) Dia. KO H H Wt./C Wt./C Part No. B12SH AL B22SH AL B24SH AL B54SH AL Thickness .105 .105 .080 .080 (2.6) (2.6) (2.0) (2.0) H 27/16” 15/8” 15/8” 13/16” Lbs./Ft. kg/m (61.9) (41.3) (41.3) (20.6) .83 .63 .49 .34 (1.23) (.93) (.73) (.50) Part No.
PAGE 181
Aluminum Most fittings, as shown in this catalog, can be supplied in aluminum. See “Fittings” section (page 72) of this catalog. Consult factory for possible minimum production quantities and set-up charges. CHANNEL NUTS B-Line recommends the use of Stainless Steel channel nuts with Aluminum channel. For channel nut pull-out strength and slip resistance, use the channel nut information provided on pg. 50 & 51. A (.
PAGE 182
Stainless Steel Alum. & Stainless Steel Materials B22SS* B24SS* • *Substitute 4 for Stainless Steel Type 304 or 6 for Stainless Steel Type 316 • Thickness: 12 Ga. (2.6 mm) • Standard Length: 10’ (3.05 m) and 20’ (6.09 m) • Material: SS4, SS6 • Weight: 1.90 Lbs./Ft. (2.83 kg/m) 15/8” (41.3) • *Substitute 4 for Stainless Steel Type 304 or 6 for Stainless Steel Type 316 • Thickness: 14 Ga. (1.9 mm) • Standard Length: 10’ (3.05 m) and 20’ (6.09 m) • Material: SS4, SS6 • Weight: 1.40 Lbs./Ft. (2.
PAGE 183
Stainless Steel Alum. & Stainless Steel Materials STAINLESS STEEL FITTINGS Most fittings, as shown in this catalog, can be supplied in Type 304 or Type 316 stainless steel. See “Fittings” section (page 72) of this catalog. Consult factory for possible minimum production quantities and set-up charges. B2000 SERIES PIPE AND TUBING CLAMPS • Safety Factor of 5 • Combination Recess Hex Head Machine Screw and Square Nut included • Material: Stainless Steel Type 304 & 316 Design Load Part No.
PAGE 184
Fiberglass Cooper B-Line offers two fire retardant (FR) resins for strut systems, polyester and vinyl ester. Both resins are ideal for corrosive environments. While polyester is sufficient for most uses, vinyl ester is suitable for a broader range of environments. Please refer to the "Corrosion Resistance Guide" for specific applications, page 183.
PAGE 185
Fiberglass CHANNEL RESIN INFORMATION Cooper B-Line offers two fire retardant (FR) resins for strut systems, polyester and vinyl ester. Both resins are ideal for corrosive environments. While polyester is sufficient for most uses, vinyl ester is suitable for a broader range of environments. Please refer to the "Corrosion Resistance Guide" below for specific applications.
PAGE 186
Fiberglass BFP22 THRU BFV22SH • Channel lengths: 10 Ft. (3.05 m) and 20 Ft. (6.09 m) • Fiberglass strut meets specification of ASTM D-4385 Levels III and IV. BFP22H17/8 Fiberglass Materials BFP22 BFV22 Solid Back Part No. BFV22SH (14.3) x 7/8” (22.2) slots 2” (50.8) on centers 9/16” 9/16” (14.3) holes 17/8” (47.
PAGE 187
Fiberglass BEAM LOADING DATA FOR GLASS REINFORCED POLYESTER RESIN Beam Span in. Part No. mm Maximum Allowable Beam Load Load Deflection @ Maximum Allowable Beam Load Allowable Load @ Deflection = 1/240 Span 1/360 Span Lbs. kN in. mm Lbs. kN Lbs. kN (305) BFP22 BFP22A 1781 2259 (7.92) (10.05) 0.064 0.037 (1.62) (.94) 1392 2259 (6.19) (10.05) 928 2051 (4.13) (9.12) 24” (609) BFP22 BFP22A 890 1127 (3.96) (5.01) 0.256 0.147 (6.50) (3.73) 347 767 (1.54) (3.41) 231 511 (1.
PAGE 188
Fiberglass BFP42 THRU BFV42SH • Channel lengths: 10 Ft. (3.05 m) and 20 Ft. (6.09 m) • Fiberglass strut meets specification of ASTM D-4385 Levels III and IV. BFP42SH BFP42H17/8 Fiberglass Materials BFP42* BFV42* BFP42H17/8* BFV42H17/8* BFP42SH* BFV42SH* 9/16” 9/16” BFV42 Solid Back Part No. BFV42SH (14.3) x 7/8” (22.2) slots 2” (50.8) on centers BFV42H17/8 (14.3) holes 17/8” (47.
PAGE 189
Fiberglass BEAM LOADING DATA FOR GLASS REINFORCED POLYESTER RESIN Beam Span in. Part No. mm Maximum Allowable Beam Load Load Deflection @ Maximum Allowable Beam Load Allowable Load @ Deflection = 1/240 Span 1/360 Span Lbs. kN in. mm Lbs. kN Lbs. kN (305) BFP42 BFP42A 841 2325 (3.74) (10.34) 0.104 0.060 (2.64) (1.52) 403 1948 (1.79) (8.66) 269 1299 (1.19) (5.78) 24” (609) BFP42 BFP42A 420 1161 (1.87) (5.16) 0.417 0.239 (10.59) (6.07) 100 486 (0.44) (2.16) 66 323 (0.29) (1.
PAGE 190
Fiberglass BF*22I CONCRETE INSERTS Fiberglass Materials • Design Load 300 Lbs (1.47 kN) • Safety Factor of 3 • Standard lengths: 6” (152),12” (305), 24” (609), 36” (914), 48” (1219), 60” (1524), 72” (1829), 84” (2133), 96” (2438), 108” (2743) and 120” (3048) • Available Material: *Insert P for BFP - Polyester Resin channel and tee *Insert V for BFV - Vinyl Ester Resin channel with Polyester Resin tee • Shipped with removable styrofoam insert Length 31/8” (79.4) Field Cutting Sealant Kits RSK010 ...
PAGE 191
Fiberglass CHANNEL NUTS • Design Load Safety Factor of 3 • Overall Nut Height 5/8” (15.9) • Maximum torque and slip resistance loads shown are when using stainless steel bolts. When using fiberglass hardware use Max. Torque for fiberglass bolts, and multiply slip resistance loads by .14 for 3/8” and .60 for 1/2” thread size. • Material: Glass Reinforced Polyurethane • Spring Material: Zinc Plated Steel Part No.
PAGE 192
Fiberglass BFVATR ALL THREADED ROD Fiberglass Materials • Design Load Safety Factor of 3 • Use ATR nuts in place of hex nuts with 3/8”-16 and 1/2”-13 threaded rod in order to obtain minimum required thread engagement of 17/32” (13.5) to obtain design load shown below. • Material: Glass Reinforced Vinyl Ester Design Load (in tension) Max. Torque Lbs. kN in.-Lbs. Lbs. kg 425 (1.89) 45 (5.1) .08 (.04) 1/2”-13 750 (3.33) 110 (12.4) .13 (.06) 5/8”-11 950 (4.22) 230 (26.0) .21 (.
PAGE 193
Fiberglass BFV100 thru BFV300 Design Load ADJUSTABLE PIPE CLAMPS • • • • • • • • Stop-Lock Kit for vertical installation Nominal Pipe Sizes Part No. BFV100 BFV200 BFV300 Pipe O.D. Range Design Load Max. Torque in. mm in. mm Lbs. kN in.-Lbs. N•m - 11/2 11/2 - 2 21/2 - 3 (15- 40) .75 - 1.90 1.90 - 2.37 2.87 - 3.50 (21.3 - 48.3) 135 135 145 (.60) 10 36 36 (1.13) (40 - 51) 1/2 (63 - 76) (48.3 - 60.3) (73.0 - 88.9) (.60) (.
PAGE 194
Fiberglass BFP2400 SERIES 2-HOLE PIPE CLAMPS • Design Load Safety Factor of 3 • Material: Glass Reinforced Polyester Design Load 15/8” (41.3) Fiberglass Materials Pipe Size 13/32” (10.3) Hole Dia. A B Part No. BFP2400-2 BFP2400-3 BFP2400-4 BFP2400-6 Nominal Pipe Size A Design Load B in. mm in. mm in. mm Lbs. kN 2 3 4 6 (50) 23/8 31/2 41/2 65/8 (60) 51/2 63/4 73/4 10 (140) 115 130 150 150 (0.51) (80) (100) (150) (89) (114) (168) (171) (197) (254) (0.58) (0.66) (0.
PAGE 195
Fiberglass BFV755 BEAM CLAMP • Design Load Safety Factor of 3 • Material: Glass Reinforced Polyurethane • Setscrew material: Stainless Steel 316 ASTM F593 Group 2, S4 1/2”-13 x 2” (50.8) 25/8” Screw (66.7) 3” (76.2) Part No. For Hanger Rod Size A 3/8”-16 BFV755-1/2 1/2”-13 3/4” (19.0) Torque Lbs. kN ft.-Lbs. N•m 400 400 (1.78) 10 10 (13) (1.78) Tapped for Hanger Rod Size A (13) BFV3104 SERIES CLEVIS HANGERS • Design Load Safety Factor of 3 at 120°F (49°C).
PAGE 196
Fiberglass BF*409 SERIES BRACKETS 6” (152) TO 24” (609) LONG • Design Load Safety Factor of 3 based on uniform loading • MH1 - From Top of Bracket to center of Mounting Hole • MH2 - From Bottom of Bracket to center of Mounting Hole 11/4” (31.7) A Fiberglass Materials MH1 12" (304.8) BF*409-6 BF*409-9 BF*409-12 BF*409-18 BF*409-24 Design Load A Part No. in. mm Lbs. kN 10 13 16 22 28 (250) 1400 1000 800 675 450 (6.22) (330) (406) (559) (711) MH2 13/32” (10.3) Dia. Mounting Holes (4.45) (3.
PAGE 197
Fiberglass BFV201 BFV202 • Material: Injection Molded Glass Reinforced Polyurethane • Material: Injection Molded Glass Reinforced Polyurethane SQUARE WASHER FOR 3/8” BOLT SQUARE WASHER FOR 1/2” BOLT 15/8” (41.3) 15/8” (41.3) 9/16” (14.3) Diameter Hole BFV340 BFV129 TWO HOLE FLAT PLATE TWO HOLE SPLICE PLATE • Material: Injection Molded Glass Reinforced Polyurethane • Material: Injection Molded Glass Reinforced Polyurethane 15/8” (41.3) 31/4” (82.5) 31/2” (88.
PAGE 198
Fiberglass BFV341 BFV342 FOUR HOLE SPLICE PLATE FIVE HOLE FLAT PLATE • Material: Injection Molded Glass Reinforced Polyurethane • Material: Injection Molded Glass Reinforced Polyurethane 91/8” (231.8) 71/4” Fiberglass Materials (184.1) BFV140 BFV143 THREE HOLE FLAT CORNER PLATE FOUR HOLE FLAT CORNER PLATE • Material: Injection Molded Glass Reinforced Polyurethane • Material: Injection Molded Glass Reinforced Polyurethane 31/2” (88.9) 31/2” (88.9) 31/2” (88.9) 53/8” (136.
PAGE 199
Fiberglass BFV135 BFV142 THREE HOLE FLAT GUSSET CORNER PLATE FOUR HOLE FLAT GUSSET CORNER PLATE • Material: Injection Molded Glass Reinforced Polyurethane • Material: Injection Molded Glass Reinforced Polyurethane 31/2” 31/2” (88.9) (88.9) 31/2” 53/8” (88.9) (136.
PAGE 200
Fiberglass BFV101 BFV103 TWO HOLE 90° CORNER ANGLE THREE HOLE 90° CORNER ANGLE • Material: Injection Molded Glass Reinforced Polyurethane • Material: Injection Molded Glass Reinforced Polyurethane 15/8” 15/8” (41.3) (41.3) 25/16” 41/8” (104.8) Fiberglass Materials (58.7) BFV104 BFV118 FOUR HOLE 90° CORNER ANGLE FOUR HOLE 90° GUSSETTED SHELF ANGLE • Material: Injection Molded Glass Reinforced Polyurethane • Material: Injection Molded Glass Reinforced Polyurethane 15/8” 31/2” (88.
PAGE 201
Fiberglass BFV280SQ BFV281SQ POST BASE FOR BF*22 POST BASE FOR BF*22A • Material: Glass Reinforced Polyurethane • Material: Glass Reinforced Polyurethane (76.2) 5” 5” (127.0) (127.0) 5” 65/8” (168.3) (127.0) BFV650 B217P CHANNEL SPACER PLASTIC CLOSURE STRIP • Spacer I.D. accommodates 3/8" rod or bolts. • Material: Polyurethane • Available in 10 Ft. (3.05 m) lengths. • Material: PVC 17/16” (36.5) 5/8” (15.9) Used when attaching fittings to side walls of channel.
PAGE 202
Mini Channel & Fittings Cooper B-Line’s mini channels and fittings provide for an economical method of supporting light load requirements on a metal framing system. Channel Channels are cold formed on our modern rolling mills from 18 Ga. (1.2 mm) low carbon steel strips plain steel (ASTM A1008 33,000 PSI min. yield) and pre- galvanized steel strips, (ASTM A653 33,000 PSI min. yield). A continuous slot with inturned lips provides the ability to make attachments at any point.
PAGE 203
B62 Channel 13/16” 13/16” • Thickness: 18 Ga. (1.2 mm) • Standard lengths: 10’ (3.05 m) & 20’ (6.09 m) • Standard finishes: Plain, Dura-Green, Pre-Galvanized • Weight: .42 Lbs./Ft. (.62 kg/m) (20.6) (20.6) 7/16” (11.1) 3/16” 3/16” (4.7) (4.7) 3 /32” (2.4) 13/16” Y X .346 (8.8) (20.6) 15/8” (41.3) X Y .406 (10.3) B62A 13/16” .406 (10.3) (20.6) Wt. .84 Lbs./Ft. (1.25 kg/m) X - X Axis SECTION PROPERTIES Channel Areas of Section Weight Moment of Inertia (I) Section Modulus (S) cm2 in.
PAGE 204
B72 Channel • Thickness: 18 Ga. (1.2 mm) • Standard lengths: 10’ (3.05 m) • Standard finishes: Plain, Dura-Green, Pre-Galvanized • Weight: .29 Lbs./Ft. (.43 kg/m) 13/16” 13/16” (20.6) (20.6) 7/16” (11.1) Y 3/16” 3/16” (4.7) (4.7) 3/32” 13/32” Areas of Section Weight Mini Channel & Fittings .287 .574 (.43) (.85) .084 .169 Wt. .58 Lbs./Ft. (.87 kg/m) Y - Y Axis Section Modulus (S) in.4 cm4 in.3 cm3 in. cm (.07) (.32) .0073 .0192 (.12) (.31) .146 .215 (.37) (.55) (.54) .0018 (1.
PAGE 205
Mini Channel Nuts & Fittings NUTS FOR B62, B72 CHANNEL SPRING NUT NUT WITHOUT SPRING Part Number B62 B72 Without Spring With Spring Without Spring Thread Size N621 N622 N627 N624 BMM-3L BMM-4L BMM-5L BMM-6L N621WO N622WO N627WO N624WO BMM-3 BMM-4 BMM-5 BMM-6 N7221 N7222 N7227 N7224 BMM-3S BMM-4S BMM-5S BMM-6S N621WO N622WO N627WO N624WO BMM-3 BMM-4 BMM-5 BMM-6 #8-32 #10-24 #10-32 1/4-20 M3.5 x 0.6 M4 x 0.7 M5 x 0.8 M6 x 1 Wt./C Thickness .150 .150 .150 .150 .150 .150 .150 .150 (3.81) (3.
PAGE 206
Mini Fittings B6141 B600-62 B6557 THREE HOLE SPLICE PLATE THREE HOLE FLAT ADAPTER PLATE THREE HOLE SPLICE PLATE • Standard finishes: ZN, GRN • Wt./C 7 Lbs. (3.2 kg) • Standard finishes: ZN, GRN • Wt./C 19 Lbs. (8.6 kg) • Standard finishes: ZN, GRN • Wt./C 7 Lbs. (3.2 kg) 27/16” (61.9) 215/16” 15/8” (41.3) (74.6) 41/8” (104.8) B22 B62 13/16” Mini Channel & Fittings (20.
PAGE 207
Mini Fittings B6133 B6132 B6135 FOUR HOLE TEE PLATE FIVE HOLE CROSS PLATE • Standard finishes: ZN, GRN • Wt./C 11 Lbs. (5.0 kg) • Standard finishes: ZN, GRN • Wt./C 13 Lbs. (5.9 kg) THREE HOLE CORNER GUSSET PLATE • Standard finishes: ZN, GRN • Wt./C 9 Lbs. (4.1 kg) 215/16” 17/8” 17/8” (47.6) (74.6) (47.6) 215/16” (74.6) 17/8” (47.6) 215/16” (74.6) B6337 B6136 FOUR HOLE CORNER GUSSET PLATE THREE HOLE TEE GUSSET PLATE FOUR HOLE TEE GUSSET PLATE • Standard finishes: ZN, GRN • Wt./C 15 Lbs.
PAGE 208
Mini Fittings B6102 B6103 B6232 THREE HOLE CORNER ANGLE THREE HOLE CORNER ANGLE • Standard finishes: ZN, GRN • Wt./C 8 Lbs. (3.6 kg) • Standard finishes: ZN, GRN • Wt./C 8 Lbs. (3.6 kg) THREE HOLE CORNER ANGLE • Standard finishes: ZN, GRN • Wt./C 7 Lbs. (3.2 kg) 13/16” 15/16” (20.6) 17/8” (23.8) (47.6) 25/16” (58.7) 23/16” 11/4” (55.5) (31.7) B6104 B6558 THREE HOLE CORNER ANGLE FOUR HOLE CORNER ANGLE FOUR HOLE CORNER ANGLE • Standard finishes: ZN, GRN • Wt./C 7 Lbs. (3.
PAGE 209
Mini Fittings B6134R&L B6234 R&L B6118 FOUR HOLE CORNER GUSSET FOUR HOLE CORNER GUSSET • Standard finishes: ZN, GRN • Wt./C 15 Lbs. (6.8 kg) • Standard finishes: ZN, GRN • Wt./C 15 Lbs. (6.8 kg) FOUR HOLE GUSSETTED SHELF ANGLE • Standard finishes: ZN, GRN • Wt./C 15 Lbs. (6.8 kg) 17/8” (47.6) 23/16” (55.5) 17/8” (47.6) 17/8” 15/16” (23.8) (47.6) 25/16” (58.7) 25/16” 15/16” (Left shown) (58.7) (23.
PAGE 210
Mini Fittings B6147-B6152 B6154 TWO HOLE OPEN ANGLE TWO HOLE OPEN ANGLE B • Standard finishes: ZN, GRN • Standard finishes: ZN, GRN • Wt./C 8 Lbs. (3.6 kg) 13/32” (10.3) C 13/32” (10.3) 123/32” (43.6) Wt./C Part No. A B6147 B6148 B6149 B6150 B6151 B6152 1 B 1 82 /2° 2 /32” 75° 21/32” 1 67 /2° 2” 60° 131/32” 521/2° 17/8” 371/2° 2” C (51.6) (51.6) (50.8) (50.0) (47.6) (50.8) 27 /32” 27 /32” 7 /8” 15/16” 11/16” 29 /32” Lbs. 13/32” kg (10.3) (21.4) (22.2) 13/16” 45° (21.4) 8.0 (30.
PAGE 211
Mini Fittings B6168 B6167 B6170 THREE HOLE SPLICE CLEVIS FOR B72 FOUR HOLE SPLICE CLEVIS FOR B72 TWO HOLE SPLICE CLEVIS FOR B62 • Standard finishes: ZN, GRN • Wt./C 16 Lbs. (7.2 kg) • Standard finishes: ZN, GRN • Wt./C 24 Lbs. (10.9 kg) • Standard finishes: ZN, GRN • Wt./C 17 Lbs. (7.7 kg) (101.6) (74.6) B72 17/8” (47.6) 4” 215/16” B62 B72 B6171 B6172 B7116 THREE HOLE SPLICE CLEVIS FOR B62 FOUR HOLE SPLICE CLEVIS FOR B62 THREE HOLE U-SUPPORT • Standard finishes: ZN, GRN • Wt.
PAGE 212
Mini Fittings B6173 B6526 B6105 FOUR HOLE CLEVIS TWO HOLE OFFSET Z-SUPPORT TWO HOLE Z-SUPPORT FOR B62 • Standard finishes: ZN, GRN • Wt./C 5 Lbs. (2.2 kg) • Standard finishes: ZN, GRN • Wt./C 7 Lbs. (3.2 kg) • Standard finishes: ZN, GRN • Wt./C 9 Lbs. (4.1 kg) 1/8” (3.2) 15/16” (23.8) 13/16” (20.6) 13/16” 121/32” (20.6) (42.0) 13/4” (44.4) 17/8” (47.6) 13/16” Mini Channel & Fittings (20.
PAGE 213
Mini Fittings B6205 B7205 B6211 END CAP FOR B62 END CAP FOR B72 Z-BEAM CLAMP • Material: ASTM A1008 SS Gr. 33 Type 1 • Standard finishes: ZN, GRN • Wt./C 3 Lbs. (1.3 kg) • Material: ASTM A1008 SS Gr. 33 Type 1 • Standard finishes: ZN, GRN • Wt./C 1 Lb. (.4 kg) • • • • • 13/16” 13/32” (20.6) (10.3) 5/16”-18 Setscrew 13/16” (20.6) Max. included Flange Thickness Material: ASTM A36 Standard finishes: ZN, GRN Wt./C 13 Lbs. (5.9 kg) 3/4” (19.0) 13/16” (20.6) 1/4” (6.3) 17/8” (47.
PAGE 214
Continuous Concrete Inserts Continuous slot Concrete Inserts are designed to provide a pre-set support system cast in concrete ceilings, walls, and floors to allow flexibility of attachment at any point along the channel. This provides an excellent support system for pipe, conduit, and cable trays. Continuous Concrete Inserts, manufactured from Cooper B-Line’s standard channels, have formed anchors spaced on 4 inch (101.6 mm) centers. 3/16” (4.
PAGE 215
Concrete Inserts Continuous concrete inserts, installed in the ceiling, can be used to support trapeze hangers, suspended pipe racks, cable trays and single or multiple pipe hangers. When installed in walls, continuous concrete inserts can be used as a support for tunnel stanchions, equipment braces, brackets and pipe racks. Concrete Inserts Use spot inserts for single pipe-support or trapeze type hangers. Spot Inserts offer full flexibility of rod and fastener sizings.
PAGE 216
Continuous Concrete Inserts B22I CONTINUOUS CONCRETE INSERT 15/8” (41.3) 4” • Design Load for B22-I-12 thru B22-I-240 (101.6) is 2,000 lbs. (8.89 kN) per foot of concrete MATERIAL: 12 Gauge (2.6) insert length with safety factor of 3 in 11/2” 3000 psi concrete. (38.1) • Loads concentrated within the last 2 3/4” inches (50.8 mm) of concrete inserts (19.0) 8” (203.2 mm) and longer should not 1 3 /8” exceed 1,000 lbs. (4.45kN). (79.4) • Concrete insert should be secured to the .
PAGE 217
Continuous Concrete Inserts B32I 4” CONTINUOUS CONCRETE INSERT (101.6) • Design Load for B32-I-12 thru B32-I-240 is 2,000 lbs. (8.89 kN) per foot of concrete MATERIAL: 12 Gauge (2.6) insert length with safety factor of 3 in 11/2” (38.1) 3000 psi concrete. • Loads concentrated within the last 2 inches (50.8 mm) of concrete inserts 27/8” 8” (203.2 mm) and longer should not (73.0) exceed 1,000 lbs. (4.45kN). • Concrete insert should be secured to the forms on 16” (406.4 mm) to 24” (609.
PAGE 218
Continuous Concrete Inserts B52I 4” CONTINUOUS CONCRETE INSERT (101.6) • Design Load for B52-I-12 thru B52-I-240 is 1,500 lbs. (6.67 kN) per foot of concrete MATERIAL: 12 Gauge (2.6) 11/2” insert length with safety factor of 3 in (38.1) 3000 psi concrete. 3/4” • Loads concentrated within the last 2 (19.0) inches (50.8 mm) of concrete inserts 25/16” 8” (203.2 mm) and longer should not (58.7) exceed 750 lbs. (3.33kN). .
PAGE 219
Spot Inserts N2500 B2500 11/4” (31.7) SPOT INSERT INSERT SQUARE NUT • • • • • For use in B2500 Spot Insert • Material: Steel ASTM A36 • Standard finish: ZN Design Load 600 Lbs. (2.67 kN) Safety Factor of 5 Order N2500 Nuts Separately Material: Steel ASTM A1011 33,000 PSI min. yield • Standard finish: ZN • Wt./C 46 Lbs. (20.8 kg) 2” Thread Size (50.8) 31/4” Part No. (82.5) N2500-1/4 N2500-5/16 N2500-3/8 N2500-1/2 N2500-5/8 N2500-3/4 N2500-7/8 Material: 12 Gauge (2.6) 11/2” 19/16” (38.
PAGE 220
Insert Accessories B205, B206, B220 B3322, B3332, B3342, B3352 X TYPE END CAPS Y TYPE END CAPS • UL listed for raceway use only • Material: 12 Gauge (2.6) • Standard finish: ZN • UL listed for raceway use only • Material: 14 Gauge (1.9) • Standard finish: ZN 3/8” (9.5) DIA. A A 1” 113/16” (25.4) (46.0) Part No. Use With B205 B206 B220 B22 B32 B52 Wt./C A 121/32” 113/32” 27/32” (42.0) (35.7) (21.
PAGE 221
Anchors WEDGE ANCHOR Catalog Number Thread Size AWA-37-225 AWA-37-275 AWA-37-300 AWA-37-350 AWA-37-375 AWA-37-500 AWA-50-275 AWA-50-375 AWA-50-450 AWA-50-550 AWA-50-700 3/8"-16 3/8" 3/8"-16 3/8" Thread Length Size in. 21/4" x x 23/4" 3/8" x 3" 3/8" x 31/2" 3/8" x 33/4" 3/8" x 5" 1/2" x 23/4" 1/2" x 33/4" 1/2" x 41/2" 1/2" x 51/2" 1/2" x 7" 3/8"-16 3/8"-16 3/8"-16 3/8"-16 1/2"-13 1/2"-13 1/2"-13 1/2"-13 1/2"-13 Drill/Hole Size mm in.
PAGE 222
Anchors PLASTIC SCREW ANCHORS • Kits contain 100 anchors, 100 screws, and 1 concrete drill bit Catalog Screw Number Size #8 x 1” #10 x 1” #12 x 1” APC-8K APC-10K APC-12K Load Cap. Tension* Load Cap. Shear* Lbs. kN Lbs. 110 140 140 (0.49) kN 70 90 90 (0.62) (0.62) (0.31) (0.40) (0.40) Note: Based on concrete compression strength of 4,000 psi using applied safety factor of 4.
PAGE 223
Anchors 1/4” CONCRETE SCREWS Catalog Number Rod Size in. ACS-125H ACS-175H ACS-225H ACS-275H ACS-325H Drill/Hole Size Load Cap. Tension* Load Cap. Shear* mm in. mm lbs. kN lbs. kN 1/4” 11/4” (6 x 32) 3/16” (5) (6 x 44) 3/16” (5) (6 x 57) 3/16” (5) (6 x 70) 3/16” (5) (6 x 82) 3/16” (5) 205 205 205 205 205 (0.91) 13/4” 21/4” 23/4” 31/4” 265 265 265 265 265 (1.18) 1/4” x x 1/4” x 1/4” x 1/4” x (1.18) (1.18) (1.18) (1.18) (0.91) (0.91) (0.91) (0.
PAGE 224
Slotted Angle Cooper B-Line Slotted Angle is an all-purpose framing system, roll formed from high strength steel strips. It is designed to be used as economical shelving, racks or electrical and mechanical supports. The unique pattern of horizontal and vertical slots permits full flexibility. Three basic sizes are available for light, medium, and heavy duty applications. Materials & Finishes* Finish Code PLN ZN GRN GALV Finish Plain Specification ASTM A1011 33,000 PSI min.
PAGE 225
Slotted Angle Sizes 13/32” (10.3) x 9/16” (14.3) SA158 • • • • Transverse Slots 14 Gauge (1.9) 15/8” x 15/8” Standard finishes: ZN, GRN Wt./Ft. .66 Lbs. (.98 kg/m) 13/32” (10.3) x 9/16” (14.3) Longitudinal Slots 137/64” (40.1) 3/4” (19.0) 11/2” (38.1) 3/4” (19.0) 10’ (3.05 m) 12’ (3.66 m) 137/64” (40.1) 13/32” (10.3) x 9/16” (14.3) SA276 • • • • Transverse Slots 14 Gauge (1.9) 15/8” x 23/8” Standard finishes: ZN, GRN Wt./Ft. .78 Lbs. (1.17 kg/m) 13/32” (10.3) x 9/16” (14.
PAGE 226
Slotted Angle Beam Loading & Combinations BEAM SECTIONS A B Single Piece (Up) C Single Piece (Level) F Single Piece (Down) G Z-Section D Single Piece with Stiffener H Broad Channel Broad Channel with Stiffener Z-Section with Stiffener K T-Section Narrow Channel H J I E T-Section with Stiffener L J-Section I-Section For greater strength required in some applications, Slotted Angle may be fastened together to create combination shapes.
PAGE 227
Slotted Angle Beam Loading BEAM LOADING SA276-15/8” (41.3) x 23/8” (60.3) x 14 Gauge (1.9) Beam Span 24” (609 mm) 36” (914 mm) 48” (1219 mm) 60” (1524 mm) 72” (1829 mm) 84” (2133 mm) 96” (2438 mm) 108” (2743 mm) 120” (3048 mm) Lbs. N Lbs. N Lbs. N Lbs. N A – – 680 (3025) 450 (2001) 340 (1512) B – – 830 (3692) 550 (2446) C – – D – E – Lbs. N Lbs. N Lbs. N Lbs. N Lbs.
PAGE 228
Slotted Angle Column Loading & Combinations COLUMN SECTIONS M N N T-Section Single Piece N Broad Channel Section P P O Narrow Channel Section P Dual Channel Section T-Channel Section O Uneven Channel Section Uneven T-Section Q R T-Channel Section I-Section Uneven I-Section For greater strength required in some applications, Slotted Angle may be fastened together to create combination shapes. A number of these combinations are illustrated above.
PAGE 229
Slotted Angle Kits & Fittings AHHK-1/4 & AHHK-3/8 8 Hanging rods come in 72” lengths. AIR HANDLER HANGING KIT Rods can be field cut for proper height requirement. • Standard finishes: ZN • Load CapacityPer Kit: 400 Lbs. (181.
PAGE 230
Reference Data METRIC CONVERSION CHART To Convert From To Multiply By radian (rad) degree 0.01745329 57.29578 Area foot2 inch2 circular mil sq. centimeter (cm2) square meter (m2) square meter (m2) square meter (m2) square meter (m2) square meter (m2) square meter (m2) square inch (in2) foot2 inch2 circular mil 0.09290304 0.00064516 0.0000000005067075 0.1550003 10.76391 1550.003 1973523000.0 Temperature degree Fahrenheit degree Celsius degree Celsius degree Fahrenheit t°C=(t°F -32)/1.8 t°F=1.
PAGE 231
Reference Data DESIGN LOAD DATA (For typical channel-fitting connections when USED IN PAIRS). 90° Fittings Lbs. kN Lbs. kN Lbs. kN Lbs. kN Lbs. kN Lbs. kN 1500 1000 750 (6.67) 1000 650 500 (4.45) 2000 1500 900 (8.90) 1500 1150 650 (6.67) 1500 1000 1000 (6.67) 1000 650 500 (4.45) (4.45) (3.34) (2.89) (2.22) (6.67) (4.00) (5.12) (2.89) (4.45) (4.45) (2.89) (2.22) Design load data includes a safety factor of 2.5 (safety factor = ratio of ultimate load to design load).
PAGE 232
Reference Data Reference Data General Notes for Strut-Type Channel Raceway UL Catagory RIUU - Cooper B-Line, Inc., Highland, IL 62249 December 11, 1998 (C) File No. E29637 FLUORESCENT AND INCANDESCENT LIGHTING Suitable for not more than the number of wires of the sizes and types indicated in the following tables. Intended to enclose circuits operating at potentials not exceeding 600 volts between conductors. In all cases, the B217-20 or B217P snap-in cover is required to complete raceway closure.
PAGE 233
Reference Data TABLE 2: MAXIMUM NUMBER OF WIRES Also suitable for the number of wires in table below when installed to support and supply electric discharge type lighting fixtures when raceway wiring is suitable for at least 70°C and clearance between fixture and raceway is at least 1/8”. In all cases, a snap-in cover is required to complete the raceway enclosure.
PAGE 234
Reference Data The data shown in the beam load charts for appropriate channels on page(s) 17 thru 39 is for simply supported, single span beams with a uniformly distributed load. For other loading and/or support conditions, use the appropriate factor from the chart below. Load Factor Reference Data Load and Support Condition Simple Beam - Uniform Load Deflection Factor 1.00 1.00 .50 .80 Simple Beam - Two Equal Concentrated Loads at 1/4 Points 1.00 1.10 Beam Fixed at Both Ends - Uniform Load 1.
PAGE 235
Reference Data RIGID STEEL CONDUIT (HEAVY WALL CONDUIT) Nominal Conduit Size Nominal Inside Diameter Outside Diameter mm In. mm In. (10) 1/2” (15) 3/4” (20) 1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” 5” 6” (25) 0.675 0.840 1.050 1.315 1.660 1.900 2.375 2.875 3.500 4.000 4.500 5.563 6.625 (17.1) 0.493 0.632 0.836 1.063 1.394 1.624 2.083 2.489 3.090 3.570 4.050 5.073 6.093 (32) (40) (50) (65) (80) (90) (100) (125) (150) (21.3) (26.7) (33.4) (42.2) (48.3) (60.3) (73.0) (88.9) (101.6) (114.3) (141.
PAGE 236
Reference Data ELECTRICAL METALLIC TUBING (EMT) — THINWALL CONDUIT Reference Data Nominal Conduit Size Outside Diameter Inside Diameter In. mm In. mm In. 3/8” (10) (15) 3/4” (20) 1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” (25) 0.577 0.706 0.922 1.163 1.510 1.740 2.197 2.875 3.500 4.000 4.500 (14.7) 1/2” 0.493 0.622 0.824 1.049 1.380 1.610 2.067 2.731 3.356 3.834 4.334 (32) (40) (50) (65) (80) (90) (100) (17.9) (23.4) (29.5) (38.3) (44.2) (55.8) (73.0) (88.9) (101.6) (114.3) Weight Per 100 Ft.
PAGE 237
Reference Data SCHEDULE 40 PVC PLASTIC PIPE Nominal Pipe Size mm (3) 1/4” (6) 3/8” (10) 1/2” (15) 3/4” (20) 1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” 5” 6” 8” 10” 12” (25) (32) (40) (50) (65) (80) (90) (100) (125) (150) (200) (250) (300) In. .405 .540 .675 .840 1.050 1.315 1.660 1.900 2.375 2.875 3.500 4.000 4.500 5.563 6.625 8.625 10.750 12.750 Inside Diameter mm (10.3) (13.7) (17.1) (21.3) (26.7) (33.4) (42.2) (48.3) (60.3) (73.0) (88.9) (101.6) (114.3) (141.3) (168.3) (219.1) (273.1) (323.9) In.
PAGE 238
Reference Data COPPER TUBING, TYPE L Reference Data Nominal Tubing Size Outside Diameter In. mm In. 1/4” (6) 3/8” (10) 1/2” (15) 5/8” (17) 3/4” (20) 1” 11/4” 11/2” 2” 1 2 /2” 3” 31/2” 4” 5” 6” 8” 10” 12” (25) .375 .500 .625 .750 .875 1.125 1.375 1.625 2.125 2.625 3.125 3.625 4.125 5.125 6.125 8.125 10.125 12.125 (32) (40) (50) (65) (80) (90) (100) (125) (150) (200) (250) (300) mm (9.5) (12.7) (15.9) (19.1) (22.2) (28.6) (34.9) (41.3) (54.0) (66.7) (79.4) (92.1) (104.8) (130.2) (155.
PAGE 239
Reference Data STANDARD WEIGHT SCHEDULE 40 STEEL PIPE Nominal Pipe Size Outside Diameter mm (10) (15) (20) (25) (32) (40) (50) (65) (80) (90) (100) (125) (150) (200) (250) (300) (350) (400) (450) (500) (600) In. mm (17.1) .675 1/2” (21.3) .840 3/4” (26.7) 1.050 (33.4) 1” 1.315 (42.2) 11/4” 1.660 (48.3) 11/2” 1.900 (60.3) 2” 2.375 (73.0) 21/2” 2.875 (88.9) 3” 3.500 31/2” 4.000 (101.9) (114.3) 4” 4.500 5” 5.563 (141.3) 6” 6.625 (168.3) 8” 8.625 (219.1) 10” 10.750 (273.1) 12” 12.750 (323.9) 14” 14.
PAGE 240
Tolco™ to Cooper B-Line Cross Reference Tolco to B-Line Cross Tolco Fig# Cooper B-Line Pt. # Tolco Fig# Cooper B-Line Pt. # Tolco Fig# Cooper B-Line Pt. # 2 STR 1/2” . . . . . . . . . . . . . . . B2400-1/2 2 STR 3/4” . . . . . . . . . . . . . . . B2400-3/4 2 STR 1” . . . . . . . . . . . . . . . . . . B2400-1 2 STR 11/4” . . . . . . . . . . . . B2400-11/4 2 STR 11/2” . . . . . . . . . . . . B2400-11/2 BC-14-5/8 . . . . . . . . . . . . . . . . . . . B321-4 BC-14-3/4 . . . . . . . . . . . . . . . . .
PAGE 241
Tolco™ to Cooper B-Line Cross Reference Tolco Fig# Cooper B-Line Pt. # Tolco Fig# Cooper B-Line Pt. # Tolco Fig# Cooper B-Line Pt. # EMTC-3/4 . . . . . . . . . . . . . . . . . . . . B2002 EMTC-1 . . . . . . . . . . . . . . . . . . . . . B2003 EMTC-11/4 . . . . . . . . . . . . . . . . . . B2004 EMTC-11/2 . . . . . . . . . . . . . . . . . . B2005 EMTC-2 . . . . . . . . . . . . . . . . . . . . . B2006 L-23 U . . . . . . . . . . . . . . . . . . . . . . . . . B844 L-24 L . . . . . . . . . . . . . . . . .
PAGE 242
Tolco™ to Cooper B-Line Cross Reference Tolco Fig# Tolco Fig# Cooper B-Line Pt. # Tolco Fig# Cooper B-Line Pt. # RIGID 2 . . . . . . . . . . . . . . . . . . . . . . B2013 RIGID 21/2 . . . . . . . . . . . . . . . . . . . B2014 RIGID 3 . . . . . . . . . . . . . . . . . . . . . . B2015 RIGID 31/2 . . . . . . . . . . . . . . . . . . . B2016 RIGID 4 . . . . . . . . . . . . . . . . . . . . . . B2017 TSN 3/8 . . . . . . . . . . . . . . . . . . . . . . TN228 TSN 1/2 . . . . . . . . . . . . . . . . . . . . . .
PAGE 243
Index B22A3 . . . . . . . . . . . . . 21 B22A4 . . . . . . . . . . . . . 21 B22AAL . . . . . . . . . . 177 B22AD3 . . . . . . . . . . . 21 B22AL . . . . . . . . . . . . 177 B24KO6 . . . . . . . . . . . 41 B24KO6AL . . . . . . . 178 B24M . . . . . . . . . . . . . . 42 B24S . . . . . . . . . . . . . . 40 B24S58 . . . . . . . . . . . . 42 B42S . . . . . . . . . . . . . . 40 B42S58 . . . . . . . . . . . . 42 B42SH . . . . . . . . . . . . . 40 B42SHSS4 . . . . . . . 180 B42SS4 . . . . . . . . . . 180 98B . .
PAGE 244
Index Index B56H17/8 . . . . . . . . . . B56H25 . . . . . . . . . . . . B56KO6 . . . . . . . . . . . B56S . . . . . . . . . . . . . . B56S58 . . . . . . . . . . . . 101 101 101 101 101 B202-1 . . . . . . . . . . . . B202-1D . . . . . . . . . . . B202-2 . . . . . . . . . . . . B202-2D . . . . . . . . . . . B202D . . . . . . . . . . . . . 101 101 101 101 101 B203 B204 B205 B206 B210 101 101 101 101 101 B210A . . . . . . . . . . . . 116 B211 . . . . . . . . . . . . . 122 B212-1/4 . . . . . . . . . .
PAGE 245
Index 82 82 82 82 82 B286 . . . . . . . . . 110,167 B287 . . . . . . . . . . . . . 110 B288 . . . . . . . . . . . . . 110 B289-12 . . . . . . . . . . 100 B289-14 . . . . . . . . . . 100 B337 B339 B340 B341 B342 .............. 82 82 82 82 82 B290 . . . . . . . . . . . . . B291 . . . . . . . . . . . . . B292 . . . . . . . . . . . . . B293 Series . . . . . . B293A Series . . . . . 100 100 101 102 102 B346L . . . . . . . . . . . . . 95 B346R . . . . . . . . . . . . . 95 B349 . . . . . . . . . . . . .
PAGE 246
Index Index B446A Series . . 54,172 B446B Series . . 54,172 B446C Series . 54,172 B447 . . . . . . . . . . . . . 168 B447A . . . . . . . . . . . . 168 B515 . . . . . . . . . . . . . . 93 B516 . . . . . . . . . . . . . 167 B516S . . . . . . . . . . . . 167 B518 Series . . . . . . 169 B519 . . . . . . . . . . . . . . 88 B601-62 . . . . . . . . . . 208 B602-A . . . . . . . . . . . 123 B602-B . . . . . . . . . . . 123 B602-C . . . . . . . . . . . 123 B613 . . . . . . . . . 108,125 B767 Series . . . . . .
PAGE 247
Index 131 131 131 139 139 B2208 B2209 B2210 B2211 B2212 139 139 139 139 139 B2213 . . . . . . . . . . . . 127 B2301 Series . . . . . 141 B2302 Series . . . . . 141 B2308 . . . . . . . . . . . . 211 B2309 . . . . . . . . . . . . 211 139 139 139 139 141 B2310 B2311 B2312 B2313 B2314 ............ B2315 B2350 B2351 B2352 B2353 ............ ............ 141 141 141 141 141 130 130 129 130 130 B2090 . . . . . . . . . . . . B2091 . . . . . . . . . . . . B2110 . . . . . . . . . . . . B2110DCU . . . . .
PAGE 248
Index Index B3362 B3363 B3364 B3365 B3367 Series Series Series Series Series B4051 B4060 B4061 B4062 B4063 ............ ..... 113 113 113 113 115 B3367S-1 Series . B3367S-2 Series . B3373 Series . . . . . B3690 Series . . . . . B3690F Series . . . . 140 140 142 143 143 B4064 B4065 B4066 B4067 B4068 ............ B4000 B4001 B4002 B4003 B4004 ............ 175 175 175 175 175 B4069 B4070 B4071 B4072 B4073 ............ B4005 B4006 B4007 B4008 B4009 ............
PAGE 249
Index BFV409 Series . . . . BFV494 Series . . . . BFV501 Series . . . . BFV532 . . . . . . . . . . . BFV557 . . . . . . . . . . . 194 194 188 197 195 BKB38-094K Series . BKC100 . . . . . . . . . . . BKC200 . . . . . . . . . . . BKCC . . . . . . . . . . . . . BKF100-4 . . . . . . . . . . 69 59 59 60 61 BMM-5L . . . . . . . . . . BMM-5S . . . . . . . . . BMM-6 . . . . . . . . . . . BMM-6L . . . . . . . . . . BMM-6S . . . . . . . . . BFV22I . . . . . . . . . . . 188 BFV22SH . . . . . . . . . 184 BFV42 . .
PAGE 250
Index Index CLDP10 . . . . . . . . . . 155 CNPSS Series . . . . . 53 DB__DS Series 156,157 DB5 . . . . . . . . . . . . . . 153 DB10 . . . . . . . . . . . . . 153 N222WO . . . . . . . . . . . 46 N223 . . . . . . . . . . . . . . 47 N223WO . . . . . . . . . . . 46 N224 . . . . . . . . . . . . . . 47 N224SS6 . . . . . 179,181 N622WO . . . . . . . . . N624 . . . . . . . . . . . . . N624WO . . . . . . . . . N627 . . . . . . . . . . . . . N627WO . . . . . . . . . DB10-28 DB10-36 DB10-42 DB10-50 DB10-60 ......
PAGE 251
Cooper B-Line reserves the right to make changes to the specifications, materials, equipment, prices, or the availability of products at any time without prior notice. While every effort has been made to assure the accuracy of information contained in this catalog at the time of publication, we cannot accept responsibility for inaccuracies resulting from undetected errors or omissions.
PAGE 252
Global Locations Cooper B-Line’s U.S. Customer Service Center is staffed Monday through Friday from 7 a.m. to 5:00 p.m. Central Standard Time. If a situation requires that you have to contact us after hours, please leave a message via phone or E-mail so we can give it immediate attention the following business day. Service Facility - Canada: Cooper B-Line - Canada Div. of Cooper Ind. Canada, Inc.