Product Overview

DURA-BLOK
Rooftop Supports
Steel Plate with Slots
Dimensions - 1
5
/8” (41mm) Wide x 6
1
/2” (65mm) Long
Material - 11 Ga. steel
(3.0mm)
Increases ultimate uniform load capacity on DBE & DBR Series supports to
500 lbs.
(2.22kN)
DURA-BLOK CLDP10 load bearing stabilizer plate increases load ratings for DBE
Series and DBR Series supports by allowing the load from the threaded rods to be
distributed over the length of the base instead of the point load where the rods
attach to the base.
CLDP10 - Load Distribution Plate
Loosen hex nuts and slide
plate under the flat washers
Retighten the hex nuts with
plate in place
DURA-BLOK
™
Rooftop Supports
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
289
Eaton B-Line series Pipe Hangers & Supports
Above rollers can be mounted on DB Series, DB6 Series, and DB10 Series units.
B3126 Series
B-LINEB-LINE
BVP150BVP150
1 1/2” I.P1 1/2” I.P..
BVT Series
B2400
Series
B218
B101
BTS
B22SH
B634
B22TH
TN Nuts
HHCS
B104
B219 Series
B379
B479
B2000 Series
Compatible Components Available to make DURA-BLOK bases more versatile
B3124
Series
Part No. Adjustable Height Width Length Weight Each
in. (mm) in. (mm) in. (mm) lbs. (kg)
CLDP10 11 Ga. (3.05) 1
5
/8” (41) 9
1
/2” (241) 0.53 (0.24)