Product Overview

DURA-BLOK
Rooftop Supports
Base with two (2)
1
/2”-13 Electro Zinc All Threaded Rod Risers and
Galv. Channel - 1” (25mm) high
Dimensions - Overall Height as Specified
Base - 4” High
(101mm) x 6” (152mm) Wide x 9.6” (244mm) Length (base length)
Material - 100% recycled rubber, UV resistant
Ultimate Load Capacity - 200 lbs.
(0.89kN) * (To increase load capacity use
CLDP10 load distribution plate.)
DURA-BLOK DBE-Series channel support is designed as a support of piping
systems, cable tray, HVAC equipment and many other applications where elevation
adjustment is critical. The DURA-BLOK is UV resistant and suitable for installation on
any type of roofing material or other flat surfaces.
For pipe straps/clamps, rollers and roller supports that can be used with these
DURA-BLOK supports, see page 289.
DBE - Series
** Longer base lengths available.
Note: At heights above 12”
(305mm), we suggest using the DB_DS Series Channel Support with Risers for
additional stability to piping system.
DBE10-12
Base with two (2)
1
/2”-13 Electro Zinc All
Threaded Rod Risers and a B3114-3
1
/2 Pipe Roll with Sockets
Dimensions - Overall Height 12” (305mm) from bottom of base to pipe
contact point on roller.
Base - 4” High
(101mm) x 6” (152mm) Wide x 9.6” (244mm) Length (base length)
Material - 100% recycled rubber, UV resistant
Pipe Roll & Sockets - For up to 3
1
/2” (90mm) pipe sizes.
Ultimate Load Capacity - 200 lbs.
(0.89kN) *
(To increase load capacity use CLDP10 load distribution plate.)
DURA-BLOK DBR-Series support is designed to support pipe up to 3
1
/2” (90mm)
nominal size where difference in elevation is required and longitudinal movement is
expected. The DURA-BLOK is UV resistant and approved for installation on any type
of roofing material or other flat surfaces.
DBR - Series (Adjustable Height)
* For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs,
the weakest point may be the insulation board beneath the rubber membrane.
Part No. Adjustable Height Width Channel Length Weight Each
in. (mm) in. (mm) in. (mm) lbs. (kg)
DBE10-8 5
1
/2” - 8” (140 - 203) 6” (152) 9.35” (238) 5.68 (2.58)
DBE10-12 5
1
/2” - 12” (140 - 305) 6” (152) 9.35” (238) 5.72 (2.59)
DBE10-16 5
1
/2” - 16” (140 - 406) 6” (152) 9.35” (238) 5.76 (2.61)
DURA-BLOK
™
Rooftop Supports
288
Eaton
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
B-Line series Pipe Hangers & Supports
Part No. Adjustable Height Width Length Weight Each
in. (mm) in. (mm) in. (mm) lbs. (kg)
DBR10-12 up to 12” (up to 305) 6” (152) 9.6” (244) 6.46 (2.93)