Submittal Sheet

ManualsBrandsCooper B-Line ManualsAir Conditioning Installation PartsDB Series Dura-Blok Rooftop Support w/ B44 Channel (5" x 6" x 4.8")

DURA-BLOK Supports

Support Bases Only

• Base only - see chart for height, width and length.

• 100% recycled rubber, UV resistant.

• Load Rating - Ultimate Uniform Load (See Chart Below)*

• DURA-BLOK channel support is designed as an economical support for piping systems,

cable tray, HVAC equipment and many other applications. The DURA-BLOK is UV

resistant and suitable for any type of roofing material or other flat surfaces. Material

effectively accepts screw fasteners for securing accessories.

* General Note: Consult roofing manufacturer or engineer for roof load capacity.

The weakest point may be the insulation board beneath the rubber membrane.

DB Series - Support Bases with B44 Channel

• Base with 14 ga. (1.9mm) galvanized channel 1” high (25.4mm) -

see chart for height, width and length.

• 100% recycled rubber, UV resistant.

• Load Rating - Ultimate Uniform Load (See Chart Below)*

• DURA-BLOK DB-Series channel support is designed for superior support of

piping systems, cable tray, HVAC equipment, walkway systems and many other

applications. The DURA-BLOK is UV resistant and suitable for installation on any

type of roofing material or other flat surfaces. (For pipe straps/clamps, rollers and

roller supports that can be used with these DURA-BLOK supports, see page 159)

• For sloped roofs use B634 adjustable hinge fittings (see page 85).

Height x Width x Length Wt./Each Load Rating

Part No.

In. mm Lbs. kg Lbs. kN

DB5 5” x 6” x 4.8” (127.0 x 152.4 x 121.9) 2.75 (125) 200 (0.89)

DB10 5” x 6” x 9.6” (127.0 x 152.4 x 243.8) 5.28 (2.39) 500 (2.22)

DB20 5” x 6” x 20.2” (127.0 x 152.4 x 513.1) 10.63 (4.82) 1000 (4.45)

DB30 5” x 6” x 30.8” (127.0 x 152.4 x 782.3) 15.99 (7.25) 1500 (6.67)

DB40 5” x 6” x 41.4” (127.0 x 152.4 x 1051.5) 21.34 (9.68) 2000 (8.89)

DB48 5” x 6” x 52.0” (127.0 x 152.4 x 1320.8) 26.70 (12.40) 2500 (11.12)

Height x Width x Length Wt./Each Load Rating

Part No.

In. mm Lbs. kg Lbs. kN

DBM 4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 2.35 (1.07) 200 (0.89)

DBP 4” x 6” x 9.6” (101.6 x 152.4 x 243.8) 4.48 (2.03) 500 (2.22)

Height x Width x Length Wt./Each Load Rating

Part No.

In. mm Lbs. kg Lbs. kN

DB610 6

/16” x 6” x 9.6” (163.5 x 152.4 x 243.8) 6.36 (2.88) 500 (2.22)

DB620 6

/16” x 6” x 20.2” (163.5 x 152.4 x 513.1) 12.90 (5.85) 1000 (4.45)

DB630 6

/16” x 6” x 30.8” (163.5 x 152.4 x 782.3) 19.45 (8.82) 1500 (6.67)

DB640 6

/16” x 6” x 41.4” (163.5 x 152.4 x 1051.5) 26.00 (11.79) 2000 (8.89)

DB648 6

/16” x 6” x 52.0” (163.5 x 152.4 x 1320.8) 32.55 (14.76) 2500 (11.12)

DB6 Series - Support Base with B12 Channel

• Base with 12 ga. (2.6mm) galvanized channel 2

/16” high (61.9mm) -

see chart for height, width and length.

• 100% recycled rubber, UV resistant.

• Load Rating - Ultimate Uniform Load (See Chart Below)*

• DURA-BLOK DB-Series channel support is designed for superior support of piping

systems, cable tray, HVAC equipment, walkway systems and many other

applications. The DURA-BLOK is UV resistant and suitable for installation on any

type of roofing material or other flat surfaces. (For pipe straps/clamps, rollers and

roller supports that can be used with these DURA-BLOK supports, see page 159)

• For sloped roofs use B634 adjustable hinge fittings (see page 85).

DB20

DB10

DBP

DBM

DB30

DB610

DB620

DB630

Reference page 153 for general fitting and standard finish specifications.

DURA-BLOK

™

Rooftop Supports

154

Strut Systems