Specification Sheet

B3201 - Forged Steel Clevis with Pin
B3201WO - Forged Steel Clevis without Pin
Size Range:
3
/8"-16 thru 2"-4
1
/2 rod
Material: Forged Steel
Function: For use on high temperature piping installations
providing hanger rod adjustability.
Features: Complies fully with code for pressure piping.
Supports loads equal to the full limitation of the hanger rod.
Available with pin and cotter pins, if required.
Approvals: Conforms to Federal Specification WW-H-171E &
A-A-1192A, Type 14 and Manufacturers Standardization Society
ANSI/MSS SP-69 & SP-58, Type 14.
Finish: Plain. Contact customer service for alternative finishes
and materials.
Order By: Part number, rod size and finish. If pin and cotter
pins are required, specify “with pin”. If other than standard
combination of clevis size and rod tapping is required, specify
clevis number, special rod tapping size and grip.
A
(Rod Size)
Hanger Rod
Not Included
B
B
Center of clevis pin to
underside of top
D
Boss Dia.
N
Thickness of threaded top.
T
N
T
G
Grip
P
Pin Dia.
W
Leg Width
D
Rod Size BDGrip G Pin Dia. N P
Part No. A in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
B3201-
3
/8
3
/8"-16 3
9
/16" (90.5) 1
7
/16" (36.5)
1
/2" (12.7)
5
/8" (15.9)
1
/2" (12.7)
B3201-
1
/2
1
/2"-13 3
9
/16" (90.5) 1
7
/16" (36.5)
1
/2" (12.7)
5
/8" (15.9)
5
/8" (15.9)
B3201-
5
/8
5
/8"-11 3
9
/16" (90.5) 1
7
/16" (36.5)
5
/8" (15.9)
5
/8" (15.9)
3
/4" (19.0)
B3201-
3
/4
3
/4"-10 4" (101.6) 2
1
/2" (63.5)
3
/4" (19.0) 1
1
/8" (28.6)
7
/8" (22.2)
B3201-
7
/8
7
/8"-9 4" (101.6) 2
1
/2" (63.5)
7
/8" (22.2) 1
1
/8" (28.6) 1" (25.4)
B3201-1 1"-8 5
1
/16" (128.6) 3" (76.2) 1" (25.4) 1
1
/4" (31.7) 1
1
/8" (28.6)
B3201-1
1
/8 1
1
/8"-7 5
1
/16" (128.6) 3" (76.2) 1
1
/8" (28.6) 1
1
/4" (31.7) 1
1
/4" (31.7)
B3201-1
1
/4 1
1
/4"-7 5
1
/16" (128.6) 3" (76.2) 1
1
/4" (31.7) 1
1
/4" (31.7) 1
3
/8" (34.9)
B3201-1
1
/2 1
1
/2"-6 6" (152.4) 3
1
/2" (88.9) 1
1
/2" (38.1) 1
1
/2" (38.1) 1
5
/8" (41.3)
B3201-1
3
/4 1
3
/4"-5 5
15
/16" (150.8) 4" (101.6) 1
1
/2" (38.1) 1
3
/4" (44.4) 1
7
/8" (47.6)
B3201-2 2"-4
1
/2 7" (177.8) 5" (127.0) 2
1
/2" (63.5) 2
1
/4" (57.1) 2
1
/4" (57.1)
Design Load Approx. Wt./100
TW650°F
(343°C) 750°F (399°C) With Pin Without Pin
Part No. in. (mm) in. (mm) Lbs. (kN) Lbs. (kN) Lbs. (kg) Lbs. (kg)
B3201-
3
/8
5
/16" (7.9) 1
1
/16" (27.0) 730 (3.25) 572 (2.54) 102 (46.2) 85 (38.5)
B3201-
1
/2
5
/16" (7.9) 1
1
/16" (27.0) 1350 (6.00) 1057 (4.70) 112 (50.8) 82 (37.2)
B3201-
5
/8
5
/16" (7.9) 1
1
/16" (27.0) 2160 (9.61) 1692 (7.52) 134 (60.8) 78 (35.4)
B3201-
3
/4
3
/8" (9.5) 1
1
/4" (31.7) 3230 (14.37) 2530 (11.25) 250 (113.4) 163 (73.9)
B3201-
7
/8
3
/8" (9.5) 1
1
/4" (31.7) 4480 (19.93) 3508 (15.60) 305 (138.3) 161 (73.0)
B3201-1
1
/2" (12.7) 1
1
/2" (38.1) 5900 (26.24) 4620 (20.55) 656 (297.5) 449 (203.6)
B3201-1
1
/8
1
/2" (12.7) 1
1
/2" (38.1) 7450 (33.14) 5830 (25.93) 718 (325.7) 433 (196.4)
B3201-1
1
/4
1
/2" (12.7) 1
1
/2" (38.1) 9500 (42.25) 7440 (33.09) 603 (273.5) 382 (173.3)
B3201-1
1
/2
1
/2" (12.7) 1
3
/4" (44.4) 13800 (61.38) 10807 (48.07) 952 (431.8) 600 (272.1)
B3201-1
3
/4
1
/2" (12.7) 2" (50.8) 18600 (82.73) 14566 (64.79) 1357 (615.5) 800 (362.9)
B3201-2
5
/8" (15.9) 2
1
/2" (63.5) 24600 (109.42) 19625 (87.29) 2403 (1090.0) 1600 (725.7)
Threaded
Accessories
Threaded Accessories
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
235
B-Line series Pipe Hangers & SupportsEaton