Manualshelf

Specification Sheet

ManualsBrandsCooper B-Line ManualsHeating Supplies3" Insulation Protection Shield (Pre-Galvanized)
123
Material: Steel (Stainless steel available)
Function: Designed for protection of foam,
fiberglass, or high density insulation when used
with pipe hangers.
Finish: Pre-Galvanized
Order By: Part number and finish.
Note: See Selection Tables on page 163 for
proper sizing.
B3154 - Short Insulation Protection Shield
B3155 - Short Insulation Protection Shield with "Loc" Tabs
B3155 same dimension as B3154 but with bottom tabs for centering and securing the shield to hanger.
Part Part Stock Size L Shield 'I.D.' Approx.Wt./100 Pipe Hanger Size
No. No.
in. (mm) in. (mm) in. (mm) Lbs. (kg) in. (mm)
B3154-1X B3155-1X 18 Ga. (1.2) 8" (203.2) 1.90 (48.2) 36 (16.3) 1
1
/2" (40)
B3154-2X B3155-2X 18 Ga. (1.2) 8" (203.2) 2.38 (60.4) 45 (20.4) 2" (50)
B3154-3X B3155-3X 18 Ga. (1.2) 8" (203.2) 2.88 (73.1) 54 (24.5) 2
1
/2" (65)
B3154-4X B3155-4X 18 Ga. (1.2) 8" (203.2) 3.50 (88.9) 66 (29.9) 3" (80)
B3154-5X B3155-5X 18 Ga. (1.2) 8" (203.2) 4.00 (101.6) 75 (34.0) 3
1
/2" (90)
B3154-6X B3155-6X 18 Ga. (1.2) 8" (203.2) 4.50 (114.3) 84 (38.1) 4" (100)
B3154-7X B3155-7X 18 Ga. (1.2) 8" (203.2) 5.00 (127.0) 93 (42.2) 5" (125)
B3154-8X B3155-8X 18 Ga. (1.2) 8" (203.2) 5.56 (141.2) 105 (47.6) 5" (125)
B3154-9X B3155-9X 18 Ga. (1.2) 8" (203.2) 6.64 (168.6) 126 (57.1) 6" (150)
B3154-10Z B3155-10Z 18 Ga. (1.2) 12" (304.8) 7.64 (194.0) 218 (98.9) 8" (200)
B3154-11Z B3155-11Z 18 Ga. (1.2) 12" (304.8) 8.64 (219.4) 247 (112.0) 8" (200)
B3154-12Z B3155-12Z 18 Ga. (1.2) 12" (304.8) 9.64 (244.8) 273 (123.8) 10" (250)
B3154-13Z B3155-13Z 18 Ga. (1.2) 12" (304.8) 10.76 (273.3) 304 (137.9) 10" (250)
B3154-14Z B3155-14Z 18 Ga. (1.2) 12" (304.8) 11.76 (298.7) 332 (150.6) 12" (300)
B3154-15Z B3155-15Z 18 Ga. (1.2) 12" (304.8) 12.76 (324.1) 360 (163.3) 12" (300)
L
L
B3154
B3155
Shield I.D.
(Inside Dia.)
Shield I.D.
(Inside Dia.)
Stock Size
Stock Size
Supports, Guides,
Shields & Saddles
Pipe Supports, Guides, Shields & Saddles
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
165
B-Line series Pipe Hangers & SupportsEaton