Submittal Sheet

Fig. 51 - Side Beam Bracket for NFPA Rod & Fastener Sizing
Size Range:
3
/8" -16 thru
1
/2" -13 rod,
1
/2" (15mm) thru 8" pipe (200mm)
Material: Steel
Function: Recommended for attaching hanger rod to side of beams or walls.
Designed to accommodate current rod schedule and fastener requirements per
National Fire Protection Association (NFPA) Pamphlet 13.
Approvals: Underwriters Laboratories Listed in the USA (UL) and
Canada (cUL), and Factory Mutual Engineering approved.
Finish: Plain. Contact B-Line for alternative finishes and materials.
Order By: Part number, rod size and finish
Part No. Pipe Size Rod ABCHole 1 Hole 2 Design Load Approx. Wt./100
in. (mm) Size in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
51-
1
/2-2
1
/2" - 2” (15 - 60)
3
/8"-16 2" (50.8)
3
/4" (19.0) 2" (50.8)
7
/16" (11.1)
7
/16" (11.1) 700 (3.11) 35 (15.9)
51-2
1
/2-4 2
1
/2" - 4” (65 - 100)
3
/8"-16 2" (50.8)
3
/4" (19.0) 2" (50.8)
9
/16" (14.3)
7
/16" (11.1) 700 (3.11) 34 (15.4)
51-5-6 5" - 6” (125 - 150)
1
/2"-13 2
1
/2" (63.5)
3
/4" (19.0) 2
1
/2" (63.5)
9
/16" (14.3)
9
/16" (14.3) 1250 (5.56) 71 (32.2)
51-8 8” (200)
1
/2"-13 2
1
/2" (63.5)
3
/4" (19.0) 2
1
/2" (63.5)
11
/16" (17.5)
9
/16" (14.3) 1250 (5.56) 70 (31.7)
Hole 1
Hole 2
B
B
C
A
A
Size Range:
3
/8"-16 and
7
/8"-9 rod
Material: Steel (Stainless steel available)
Function: Designed for attaching a hanger rod to to the side of beams or
walls.
Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A,
Type 35 and Manufacturers Standardization Society ANSI/MSS SP-69 &
SP-58, Type 34.
Finish: Plain or Electro-Galvanized. Contact B-Line for alternative
finishes and materials.
Order By: Part number and finish.
B3060 - Side Beam Angle Clip
A
Hole Size
B
B
C
D
D
T
Hole Size A BCDTDesign Load Approx. Wt./100
Part No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
B3060-
3
/8
7
/16" (11.1) 2
3
/16" (55.6) 2" (50.8) 1
1
/4" (31.7)
1
/4" (6.3) 305 (1.35) 53 (24.0)
B3060-
1
/2
9
/16" (14.3) 2
3
/16" (55.6) 2" (50.8) 1
1
/4" (31.7)
1
/4" (6.3) 565 (2.51) 51 (23.1)
B3060-
5
/8
11
/16" (17.5) 2
3
/16" (55.6) 2" (50.8) 1
1
/4" (31.7)
1
/4" (6.3) 909 (4.02) 48 (21.8)
B3060-
3
/4
13
/16" (20.6) 3" (76.2) 3" (76.2) 1
3
/4" (44.4)
3
/8" (9.5) 1355 (6.03) 169 (74.8)
B3060-
7
/8
15
/16" (23.8) 4" (101.6) 4" (101.6) 2
1
/2" (63.5)
3
/8" (9.5) 1870 (8.32) 312 (141.5)
Upper
Attachments
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Upper Attachments
216
Pipe Hangers & Supports