Submittal Sheet

Size Range:
3
/8" -16 thru
7
/8" -9 rod
Material: Steel
Function: Recommended for attaching hanger rod to side of beams
or walls.
Approvals:
3
/8" -16 - Underwriters Laboratories Listed in the USA (UL)
and Canada (cUL), and Factory Mutual Engineering approved.
Finish: Plain. Contact B-Line for alternative finishes and materials.
Order By: Part number, rod size and finish
Size Range:
1
/2" (15mm) thru 4" (100mm) pipe (
3
/8"-16 rod)
Material: Stainless Steel
Function: Recommended for attaching hanger rod to steel or wood
beams. Tapped hole allows easy adjustment of hanger rod.
Approvals: Underwriters Laboratories Listed in the USA (UL)
and Canada (cUL), and Factory Mutual Engineering approved for
1
/2" (15mm) thru 4" (100mm) pipe.
Weight: Approx. Wt./100 - 20.0 Lbs.
(9.1kg)
Order By: Part number
Note: Available only in Stainless Steel materials.
Per NFPA 13:
1
/2" (15mm) thru 2" (50mm) pipe use
3
/8"-16 fastener;
2
1
/2" (65mm) thru 4" (100mm) pipe, use
1
/2"-13 fastener.
Fig. 50 - Side Beam Bracket for NFPA Rod & Fastener Sizing
Fig. 56 - Tapped Side Beam Connector (Stainless Steel)
C
A
A
B
H
H
B
3
/8"-16
2
5
/8"
(66.7)
1"
(25.4)
1
1
/4"
(31.7)
7
/16"
(11.1)
9
/16"
(14.3)
Part No. Rod ABCHole Size H Max. Rec. Load Approx. Wt./100
Size in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
50-
3
/8
3
/8"-16 2" (50.8)
3
/4" (19.0) 2" (50.8)
7
/16" (11.1) 700 (3.22) 35 (15.9)
50-
1
/2
1
/2"-13 2" (50.8)
3
/4" (19.0) 2" (50.8)
9
/16" (14.3) 700 (3.22) 35 (15.9)
50-
5
/8
5
/8"-11 2" (50.8)
3
/4" (19.0) 2" (50.8)
11
/16" (17.5) 700 (3.22) 32 (14.5)
50-
3
/4
3
/4"-10 2
1
/2" (63.5)
3
/4" (19.0) 2
1
/2" (63.5)
13
/16" (20.6) 1250 (5.56) 110 (49.9)
50-
7
/8
7
/8"-9 2
1
/2" (63.5)
3
/4" (19.0) 2
1
/2" (63.5)
15
/16" (23.8) 1250 (5.56) 100 (45.3)
Material: Steel
Function: — Recommended for supporting pipe at various
distances from wall or column.
Finish: Plain. Contact B-Line for alternative finishes and materials.
Order By: Part number and finish
B3061 - Angle Bracket (TOLCO Fig. 42)
A
B
Part No. Size ABHole Size Max. Rec. Load Approx. Wt./100
in. (mm) Size in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
B3061-1 1 3" (76.2) 2" (50.8)
7
/16" (11.1) 180 (0.80) 46 (20.8)
B3061-2 2 4" (101.6) 3" (76.1)
7
/16" (11.1) 180 (0.80) 65 (29.5)
B3061-3 3 3" (76.2) 2" (50.8)
9
/16" (14.3) 390 (1.73) 85 (38.5)
B3061-4 4 4" (101.6) 3" (76.1)
9
/16" (14.3) 390 (1.73) 115 (52.1)
Upper
Attachments
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Upper Attachments
Pipe Hangers & Supports
217