Submittal Sheet

Upper
Attachments
Size Range:
3
/8"-16 rod
Material: Steel (Stainless steel available)
Function: Designed for attaching
3
/8”-16 hanger rod to the
side of beams or walls.
Approvals: Conforms to Federal Specification WW-H-171E &
A-A-1192A, Type 35 and Manufacturers Standardization Society
ANSI/MSS SP-69 & SP-58, Type 34.
Finish: Plain or Electro-Galvanized
Order By: number and finish.
Design Load: 300 Lbs.
(1.33kN)
Weight: Approx. Wt./100 - 15 Lbs. (6.8 kg)
B3060L - Light Duty Angle Clip
Size Range:
3
/8"-16 and
1
/2"-13 rod,
1
/2" (15mm) thru 3
1
/2" (90mm) pipe
Material: Steel
Function: Designed for attaching hanger rod to the side of beams or walls.
Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A,
Type 35 and Manufacturers Standardization Society ANSI/MSS SP-69 &
SP-58, Type 34.
Finish: Plain or Electro-Galvanized
Order By: number and finish.
Design Load: 500 Lbs.
(2.22 kN) when installed in either direction.
Weight: Approx. Wt./100 - 49 Lbs.
(22.2 kg)
B3070 - Reversible Angle Clip (TOLCO Fig. 52)
7 Ga.
(4.5)
1
7
/8"
(47.6)
9
/32" Dia
(7.1)
2 Holes
H1
A
H2
H3
4 Holes
A
B
C
7
/16" Dia
(11.1)
2 Holes
1
5
/16"
(33.3)
13
/16" (20.6)
1
1
/4"
(31.7)
1
/2"
(12.7)
Rod Size AB CHole 1 Hole 2 Hole 3 Max. Rec. Load Approx. Wt./100
Part No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
B3070-
3
/8x
1
/2
3
/8"-16 x
1
/2"-13 2" (50.8)
13
/16" (20.6) 2" (50.8)
9
/16" (14.3)
7
/16" (11.1)
5
/16" (7.9) 700 (3.11) 35 (15.9)
B3070-
1
/2x
1
/2
1
/2"-13 x
1
/2"-13 2" (50.8)
3
/4" (19.0) 2" (50.8)
9
/16" (14.3)
9
/16" (14.3)
5
/16" (7.9) 700 (3.11) 34 (15.4)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Upper Attachments
Pipe Hangers & Supports
215
Revised 4/8/2014