Instruction manual

10
Contents Page
2. Creating a New Notification
Click on the “Create New Notication” link or click on the “+” sign.
Title
Allows you to name your notication, e.g., Fridge#1 Temperature Alert
Class of Notification
There are four notication options available when creating a new notication.
• Application: Application notications are sensor specic (temp sensor = trigger alert when temp is above
70°F, etc.). If creating an application specic notication, you will need to choose what sensor type you are
creating the alert for either temperature or humidity. The system will automatically populate a list of sensor
types that are currently being used within the network. The noticatiion you create will be based on the
selected sensor type.
• Inactivity: Set up “Inactivity” notications to alert you when your sensors and/or gateways have stopped
communicating with the servers. Failure to set up an “Inactivity” notication will result in no email/SMS text
being sent should your sensors stop communicating with the servers. This can also be used for inactivity in
the gateway.
• Low battery: Allows users to dene a battery power percentage level that will trigger an alert from the
system, warning them to replace batteries.
• Advanced: Allows the user to set notications based on more advanced rules; such as comparing past data
points with the current one to determine if the notication should be sent.
NotifEye after Aware period: Sends a notication any time a sensor exceeds set measurement limits and
enters an aware state.
Back Online: Sends a notication when a connection is restored.
Battery below 10 (%): Sends a notication when a battery drain reaches 10% battery life.
When you are nished, click the “Create” button.
3. Setting and Editing Notification Settings
People that will receive this notification
For each person that you want to receive notications, start typing a name into the box and the
system will automatically populate the name of a user within your sensor network. If there are already
multiple users on the network, a dropdown list of names will appear. Select the name of the user for
Select the class of
notication