Instruction manual

ManualsBrandsCooper Atkins ManualsComputer equipmentNotifEye

N TIF

EYE

NotifEye

™

Wireless Sensors

and Ethernet Gateway

Manual

Inside the Box

• (4) Temperature Sensors #15100

• (1) Ethernet Gateway #15501

Power Supply Cord

Antenna

6 ft Ethernet Cable

• (4) CR2032 Coin Cell Batteries

• (4) Loop & Lock Tape Strips

• (8) Mounting Screws

• Reference Guide

Contents

Creating an Account

• Creating An Account..................................................2

Setting Up the Hardware

• Setting up and Using the Ethernet Gateway..............3

• Inserting Batteries......................................................4

Setting Up the Online System

• Logging into the System ........................................... 4

• Adding Sensors, Gateways and Networks..............4-5

• Editing Gateway Settings...........................................5

• Overview of the NotifEye System........................... 6-7

• Conguring Sensors............................................... 7-9

• Setting Notications...............................................9-11

• My Account Settings..................................................11

Mounting Sensors

• Mounting Sensors....................................................12

Advanced

• Adding, Editing and Setting User Permissions... 12-13

• Sensor Maps............................................................14

• Sensor History and Chart Views..........................14-15

• Viewing and Exporting Sensor Data.........................15

• System Reports.........................................................16

User Information................................................17

Warranty Information.....................................17

instructional video available

Clicking on the video icon associated with a

topic will open an instructional video in a

browser window

This is an interactive pdf.

Go to specic points in the manual by:

• using the bookmarks link

in the left margin.

• clicking on the sub-headings in the Contents pane.

Summary of content (17 pages)

PAGE 1
N TIF TM EYE POWE R E D B Y T E M P T RA K NotifEye™ Wireless Sensors and Ethernet Gateway Manual Contents 1 Creating an Account • Creating An Account..................................................2 2 Setting Up the Hardware • Setting up and Using the Ethernet Gateway..............3 • Inserting Batteries......................................................4 3 Setting Up the Online System • • • • • • • 4 Logging into the System ...........................................
PAGE 2
1 Creating An Account 1. In a web browser, navigate to www.notifeyewireless.com 2. Click the “Create New Account” button. Please ensure all fields are completed. 3. Account Information section. Key Fields: • Time Zone - All data is recorded using Universal Coordinated Time (UTC) also known as Greenwich Mean Time (GMT). To select a time zone, locate the city closest to you within your time zone. This can be updated later if needed. 4. Primary Contact Information section.
PAGE 3
Setting Up the Hardware 2 Setting Up and Using the Ethernet Gateway • • • • Connect the antenna. Plug the Ethernet cable with internet connectivity into the gateway. Plug the power supply cord into a power outlet then connect the plug into the gateway. Once all three lights turn green, your network is ready to bring sensors online. 1 2 3 Front of Ethernet Gateway Understanding the Ethernet Gateway Lights Light 1: Indicates the Ethernet cable is plugged in.
PAGE 4
Inserting Batteries Slide the coin cell battery into the sensor as shown in fig.1. Push the battery all the way to the back using a paper clip. It will power on within 10-20 seconds. Once you have assigned all your sensors to a network in the online system, they are ready to be mounted. Fig. 1 When changing a sensor’s heartbeat, the new configuration information will be sent to the sensor on the next heartbeat. Battery + _ Warning: Your sensors ship with a 10-minute heartbeat.
PAGE 5
• Press the “Assign Sensor” button. The sensor will now appear in the sensor list. • Repeat this process to add more sensors to this network. Note: Sensors contain initial factory data that should be cleared before collecting new data. To do this, click the “Clear Data” link. 2. Adding Additional Gateways. • Choose the “Manage” tab from the main navigation bar. • From the “Network Settings” pane on the left, select the network you would like to add the gateway to.
PAGE 6
Overview of the NotifEye System The Online Interface When you have logged in to the online system, click on the “Overview” tab. This is the default view. 4. Sensor Status Indicators 1. Main Navigation 5. My Account 6.List Options 3. Sensor List 2. At a Glance 1. Main Navigation Overview Notifications Manage Reports Sensor Maps - click to return to “Home” view. This shows all the sensors and gateways. Mouse over and click to select a particular network from the dropdown menu.
PAGE 7
. Current Sensor Information 9. Date Range Selector 8. Sensor Data Window 7. Current Sensor Information Displays the most current information of the selected sensor, including: last check-in, signal strength, battery power and last sensor reading. 8. Sensor Data Window Select a tab to change between: History Notifications Chart Export Edit - displays a history (in list form) of the sensor’s data. - allows you to view, add, edit or delete notifications for the sensor.
PAGE 8
If you have a question about any fields in this window, mouse over the next to the right of the field and it will give you a brief definition You can also type in the numbers as well as using the sliders to change them Heartbeat Interval How often the sensor transmits to the online system via the gateway. It is recommended to set the Heartbeat Interval to 120 minutes (2 hours) to preserve battery life.
PAGE 9
Threshold Buffer A buffer to prevent the sensor from bouncing between standard operation and the aware state when the assessments are very close to a threshold. E.g., if a minimum value is set to 32°, a maximum value is set for 41° and the buffer is set to 1°, when a sensor takes an assessment below 32° or above 41° it enters and remains in the Aware State until the temperature reading returns to within 1° of the preset limits (i.e., 33° and 40° respectively).
PAGE 10
2. Creating a New Notification Click on the “Create New Notification” link or click on the “+” sign. Select the class of notification Title Allows you to name your notification, e.g., Fridge#1 Temperature Alert Class of Notification There are four notification options available when creating a new notification. • Application: Application notifications are sensor specific (temp sensor = trigger alert when temp is above 70°F, etc.).
PAGE 11
the notification. You will also need to select how the notification will be sent (email/SMS text or both). If the person to be notified does not have an account on the network, you may quickly add them by selecting the “New System User” link and entering their contact information. Notification Parameters Title Name of Notification Notification Text Message that will be displayed when notification is sent.
PAGE 12
4 Mounting Sensors Sensors should be placed on a clean, dry, flat surface. Place them at least 3 ft away from each other and any wireless gateway for clearest transmissions. Do not place the sensor body inside any refrigerator/freezer cabinet or storage area since this will interfere with sensor performance. Sensors can be mounted in a variety of ways including using the screws or loop & lock tape that comes in your NotifEye kit.
PAGE 13
Click the “+” sign or select “Add New User” and fill in their corresponding information. You will need to assign them a username and password. If you want this user to receive cell phone or text alerts from the system, you’ll need to enter their cell phone number and cell carrier from the dropdown. Full Permissions checkbox If you are creating another administrator, who will have permission to edit information, you’ll need to make sure to check the “Full Permissions” box.
PAGE 14
Sensor Maps The first time the Sensor Map tab is selected you will be prompted to choose and upload an image of your facility from your own files. Your sensors can be superimposed onto this image to represent their physical location in the facility. Load Data Snapshot gives an overview of the last readings for all sensors shown on map. Clicking and dragging with the mouse allows you to view different portions of the map.
PAGE 15
Note: The tab highlighted in green is your current selection. Clicking and dragging between two points on the graph will select the zoom area. This area will be shown in the top graph. Zoom Zoom allows you to view a particular portion of the top graph. When you click and drag with your mouse between two points on the graph, a magnified view will appear in the top graph area. Click “Reset Zoom” to restore to the default view. Viewing and Exporting Sensor Data Exporting to .
PAGE 16
Exporting Data to a 3rd Party You can alternately send your sensors’ incoming data to a 3rd party by clicking on the “Configure data push” link at the bottom of the window. From this area you can pass data from your wireless sensor network devices to another service in real time. This is done by coding the data into a url query then sending the data via http get request at the time data is received.
PAGE 17
User Information For detailed instructional videos on how to use your NotifEye™ Wireless Sensors or the NotifEye™ Online System, please visit us at: www.cooper-atkins.com/notifeye/support This equipment has been tested and found to comply with the limits for a Class B digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.