Datasheet

Peltier-Controller
• Output for Peltiermodules
• pt100 / pt1000 or customized sensors, user
programmable
• 2-or 3 wire connection
• PID-Controller, programmable
• Control input, optional with switch on or
switch off function
• Signal output, optional with alarm- or
temperature O.K.-function
• Made in Switzerland
The Temperature Controller TC2812 is specially
optimized for the driving of Peltiers. Most of
the functions are programmable via the front
switches or a PC programm via its serial
interface RS232.
Supply voltage 12 to 28V DC
Output current 12 A maximum, PWM-output with Semiconductor H-Bridge, wearless, switching
automatically to cooling- or heating mode
Controller PID-Controller, Parameters programmable
Sensor input 2- or 3 wire technic plus additional shield connection for longer lead lengths
Reading- and -50.0 to +150.0°C nominal, monitoring –75.0 to +175.0°C
Control range
Reading resolution 0.1 degree
Sensors Pt100 and Pt1000 selectable, low measuring current, customized sensor
programmable via serial interface, sensor curve free definable via fix points in
25-degree steps.
Display Bright and large 7-segment-LED Indication
Process Indicator one LED for heating and cooling each, plus one for the acitive programmable
mode
Control input 12 to 28V DC, isolated with opto coupler
Signal output max. 28V, NPN, isolated with opto coupler, load current max. 100 mA
RS232-interface optional, communication via DSUB9, Software included if this option is selected
Parameter all Parameters are permanently stored in the Flash memory
Dimensions
Panel cutout: 92.5 mm x 43 mm
CoolTronic GmbH • Konstanzerstrasse 51a • CH-9512 Rossrüti
Telefon [phone] • Fax [phone]
May be subject to technical changes without notice, 03.04.2007 / V1.02
96.0 mm
48.0 mm
134.0 mm
111.0 mm