Datasheet

CoolTronic GmbH • Konstanzerstrasse 51a • CH-9512 Rossrüti
Telefon [phone] • Fax [phone]
Peltier-Controller
• Output for Peltiermodules
• pt100 / pt1000 or customized sensors, user
programmable
• 2-or 3 wire connection
• PID-Controller, programmable
• Supply voltage, optional with switch on or switch
off function
• Signal output, optional with alarm- or temperature
O.K.-function
• Made in Switzerland
The Temperature Controller TC2812 is specially
optimized for the driving of Peltiers. Most of the
functions are programmable via the front switches or
a PC programm via its serial interface RS232.
Supply voltage 12 to 28V DC
Output current 12 A maximum, PWM-output with Semiconductor H-Bridge, wearless
Controller PID-Controller, Parameters programmable
Sensor input 2- or 3 wire technic plus additional shield connection for longer lead lengths
Reading- and -50.0 to +150.0°C nominal, monitoring –75.0 to +175.0°C
Control range
Reading resolution 0.1 degree
Sensors Pt100 and Pt1000 selectable, low measuring current, cusotmized sensor programmable via
serial interface, sensor curve free definable via fix points in 25-degree steps.
Display Bright and large 7-segment-LED Indication
Process Indicator one LED for heating and cooling each, plus one for the acitive programmable mode
Supply voltage 12 to 28V DC, isolated with opto coupler
Signal output max. 28V, NPN, isolated with opto coupler, load current max. 100 mA
RS232-interface optional, communication via DSUB9, Software included if this option is selected
Parameter all Parameters are permanently stored in the Flash memory
Dimensions
Panel cut out: 92.5 mm x 43 mm
Technical changes reserved. Status from 10.11.2004 / V1.00
96.0 mm
48.0 mm
134.0 mm
111.0 mm